Abstract:Lithium–sulfur (Li–S) batteries have been recognized as a promising energy technology to power stationary and portable electronic devices and electrical vehicles, since the discovery in the 1960s.1 The typical reactions entail Li→Li+ + e− at the anode and S + 2e− → S2− at the cathode, with an overall reaction of 2Li + S→Li2S. Li–S batteries in general exhibit multiple merits. (i) Li–S batteries can deliver a theoretical energy density of 2567 Wh kg−1 that is nearly 10-fold higher than those of conventional Liion batteries (LIBs).3,4 For instance, an energy density of about 180 Wh kg−1 is usually observed for LiCoO2/C battery, 210 Wh kg−1 for LiFePO4/C battery, 200 Wh kg −1 for LiMnO4/C battery, and about 260 Wh kg −1 for LiNi1/3Mn1/3Co1/3/C battery. 5,6 This is because of the high specific capacity of sulfur (1672 mAh g−1), which can meet the ever-increasing demand of portable electronic devices and electrical vehicles.7–9 (ii) Sulfur is one of the most abundant elements on the earth’s crust, and more than 70 million tons of elemental sulfur are annually produced as a by-product from hydrodesulfurization in petroleum refining processes, coal desulfurization, etc.10,11 (iii) Sulfur is a low-cost natural resource and readily accessible.12,13 (iv) Sulfur is also environmentally compatible because of its low toxicity and low impacts to the environment.9,14–16 However, large-scale commercialization of the Li–S battery technology is greatly impeded by a series of challenging issues, which are mostly correlated with the cathode (Scheme 1). These include (i) poor electrical conductivity of sulfur and polysulfides (∼5× 10−30 S cm−1 at 25 ∘C),17–19 resulting in low specific capacity, low Coulombic efficiency, low utilization of active sulfur, and low charge–discharge rate performance; (ii) rapid mechanical degradation of cathode due to large volume expansion (up to 80%) of sulfur after complete lithiation; and (iii) dissolution of lithium polysulfides (Li2Sx, 4≤ x≤ 8) into organic electrolytes and the subsequent so-called “shuttle” effects, which results in uncontrollable sulfide deposition on the anode of lithium metal, lowering the Coulombic efficiency, and causing rapid capacity attenuation.20–23 To mitigate these issues, a number of strategies have been developed and reported in recent literatures, mostly based on physical and/or chemical confinement of sulfur in a conductive matrix (Scheme 1). Therefore, in this article, we will summarize recent progress in the design and engineering of effective cathodes for Li–S battery that entails mostly physical and chemical confinements.

Structure engineering of cathode host materials for Li–S batteries

Nanostructured Host Materials for Trapping Sulfur in Rechargeable Li–S Batteries: Structure Design and Interfacial Chemistry

Structural Engineering of Cathode Materials for Lithium–Sulfur Batteries

Recent Advances in Cathode Materials for Rechargeable Lithium–sulfur Batteries

Recent Advances in Cathode Materials for Li–S Battery: Structure and Performance

Recent advances in carbon-based sulfur host materials for lithium-sulfur batteries

Recent advances of hollow-structured sulfur cathodes for lithium-sulfur batteries

Cathode Materials for Rechargeable Lithium‐Sulfur Batteries: Current Progress and Future Prospects

Anode Interface Engineering and Architecture Design for High‐Performance Lithium–Sulfur Batteries

Rational Design of High Energy Sulfur Cathodes for Lithium-Sulfur Batteries

Recent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries

Material design and structure optimization for rechargeable lithium-sulfur batteries

Development of carbon materials for sulfur cathodes in inorganic-based solid-state lithium sulfur batteries

Electrode Design for Lithium–Sulfur Batteries: Problems and Solutions

A Review of Cathode Materials in Lithium-Sulfur Batteries

Design of coatings for sulfur‐based cathode materials in lithium‐sulfur batteries: A review

Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes

Advances in Cathode Materials for High-Performance Lithium-Sulfur Batteries

Free‐Standing Nanostructured Architecture as a Promising Platform for High‐Performance Lithium–Sulfur Batteries

Tuning The Structure And Property Of Nanostructured Cathode Materials Of Lithium Ion And Lithium Sulfur Batteries

Crystalline Multi‐Metallic Compounds as Host Materials in Cathode for Lithium–Sulfur Batteries