Abstract:The main challenges of a solar steam generation device based on biomass materials are complicated processing techniques and relatively low efficiency. To solve these problems, we reported a simple immersion treatment method by depositing polydopamine (PDA) and silver nanoparticles (AgNPs) on natural wood to prepare a novel solar interface evaporation device. exhibits a unique bilayer structure. The absorbance of the top light absorption layer is higher than 96% in a wide wavelength range (300–2500 nm). Owing to the synergistic photothermal effect between PDA and AgNPs, has ultrafast solar–thermal response (a temperature increase of 42.5 °C within 5 min under 1 sun), and more heat is located at the steam generation interface (the surface temperature is 45.1 °C). The natural wood layer at the bottom with low thermal conductivity provides sufficient water supply and reduces the bulk heat loss. A high evaporation rate of 1.58 kg m–2 h–1 is achieved using under 1 sun (1 kW m–2). Its evaporation efficiency reaches 88.6%. The results upon sewage treatment and seawater desalination indicate that has an excellent purification ability and self-desalting capacity. More importantly, when compared to traditional solar evaporators, exhibits high antibacterial activity. The result of this antibacterial experiment shows that this material almost completely kills harmful bacteria. Therefore, has a high application potential in seawater desalination and sewage purification, providing a significant incentive to solve the problem of insufficient freshwater supply.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14068?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14068</a>.Photographs of the preparation process of and ; photograph of cut out and SEM images of cut out under different magnifications; XPS results of samples; thermal conductivity results of dry wood, dry , wet wood, and wet ; adsorption dye solution test results of ; photographs of steam generation of ; evaporation rate of the four systems in the dark conditions within 1 h; E. coli suspension cultured with different samples for 24 h; evaporation rate and efficiency of the sample within 24 working cycles; ATR-FTIR spectra of the sample after 24 working cycles; surface temperature IR mapping images of the evaporation system under different sun conditions; evaporation rate and efficiency of the seawater as a function of time under different sun conditions; top-view of during the desalination test within 24 h; comparison results of the evaporator and other evaporators; and steady-state energy balance analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14068/suppl_file/am0c14068_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Surpassing 2D Photoabsorbers with Palm Fiber Upcycling As Highly Hydrophilic and Low-Cost Photothermal Materials for Improved Water Transport Interfacial Solar Steam Generation

Augmenting Light‐to‐Heat Conversion through 3D Scalable Palm Fiber for Energy Efficient Photothermal Solar Steam Generation

Biomass Waste‐Derived Solar Evaporator for Efficient and Low‐Cost Water Evaporation

Biomass‐based materials for sustainably‐sourced solar‐driven interfacial steam generation

A bioinspired hollow fiber-based evaporator with hybrid photothermal enhancement for efficient solar steam generation

Bio-Derived Photothermal Materials and Evaporators for Sustainable Solar Energy-Driven Water Process

Solar-driven water evaporation using a collaborative photothermal conversion material system based on carbonized waste polyphenylene sulfide and copper sulfide

Low-cost Carbonized Kelp for Highly Efficient Solar Steam Generation

Highly Efficient Solar Steam Generation and Desalination through Gourd‐flesh Templated Polypyrrole Composite

Wood-Based Solar Interface Evaporation Device with Self-Desalting and High Antibacterial Activity for Efficient Solar Steam Generation

Biomass derived Janus solar evaporator for synergic water evaporation and purification

Scalable and low-cost fabrication of hydrophobic PVDF/WS2 porous membrane for highly efficient solar steam generation

Progress in interfacial solar steam generation using low-dimensional and biomass-derived materials

Super Hydrophilic Activated Carbon Decorated Nanopolymer Foam for Scalable, Energy Efficient Photothermal Steam Generation, as an Effective Desalination System

Hierarchically porous carbonized Pleurotus eryngii based solar steam generator for efficient wastewater purification

Side Area‐Assisted 3D Evaporator with Antibiofouling Function for Ultra‐Efficient Solar Steam Generation

A Bilayered Wood-Poly(3,4-ethylenedioxythiophene):Polystyrene Sulfonate Hydrogel Interfacial Evaporator for Sustainable Solar-Driven Sewage Purification and Desalination

Highly Efficient and Cost-Effective Water Desalination via the Hybrid Hydrogel-Based Solar-Driven Interfacial Evaporation

Waste tissue-based bilayer solar evaporator for efficient solar photothermal generation of clean water

Biomass photothermal structures with carbonized durian for efficient solar-driven water evaporation

Biomass-based high-efficiency solar-driven interface evaporator based on natural pomelo peel with multi-curvature gradient structure