Abstract:Abstract The data acquisition system is widely used in electronic measuring instruments, for example, the oscilloscope . The development direction of the oscilloscope reflects the research status and development trend of the data acquisition system. Currently, the index of oscilloscopes is progressing toward a high sampling rate, and the performance of the analog‐to‐digital converter (ADC) has become the main bottleneck to improve the sampling rate of the acquisition system. The alternate sampling technology entails multichannel low sampling rate ADCs to achieve high sampling rate data acquisition through parallel sampling and realize data reconstruction through software. The sampling clock is the most important and difficult part of the system. For ADCs with the 100‐GS/s sampling rate and 10‐bit resolution, the jitter of the sampling clock needs to be in sub‐100 fs along with multiple phases. Based on the principle of injection locking, a 150‐GS/s sampling clock is proposed in this paper, which is implemented in a 0.15‐μm GaAs process, and the 50‐GHz locking range is achieved. The measurement results show that the sampling frequency is 150 GS/s, the root mean square (RMS) jitter is 63 fs with the integrated range from 1 kHz to 10 MHz, and the phase noise can meet the sampling requirements of the 10‐bit oscilloscope, which can provide a clocking scheme for small and low‐power ultrahigh‐speed oscilloscope.

A Quadrature Clock Generator with Calibration for 22&#x223c;31.4 GS/s Real-Time Sampling System

A Quadrature PLL with Phase Mismatch Calibration for 32gs/s Time-Interleaved ADC

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

A Calibration Scheme for 24–28-Ghz Variable-Gain Phase Shifter in 65-Nm CMOS

A 10‐MHz to 50‐GHz low‐jitter multiphase clock generator for high‐speed oscilloscope in 0.15‐μm GaAs technology

A Calibration-Free Low Spur Multi-Phase Sampling PLL.

A Reference-Sampling Based Calibration-Free Fractional-N PLL with a PI-Linked Sampling Clock Generator

A 12-Ghz All-Digital Calibration-Free FMCW Signal Generator Based on a Retiming Fractional Frequency Divider

An 8.52–11.34 GHz 0.34° Phase Error Quadrature Clock Generator with Time-Voltage-Time Convertor

Fast and high-precision VCO frequency calibration technique for wide-band frequency synthesizer

A 5ghz 200khz/5000ppm Spread-Spectrum Clock Generator with Calibration-Free Two-Point Modulation Using a Nested-Loop BBPLL

A 32.5-Gs/s Sampler with Time-Interleaved Track-and-Hold Amplifier in 65-Nm CMOS

A 32.5-GS/s two-channel time-interleaved CMOS sampler with switched-source follower based track-and-hold amplifier

A 60-Ghz Sub-Sampling Frequency Synthesizer Using Sub-Harmonic Injection-Locked Quadrature Oscillators

A 500 kHz to 150 MHz Multi-Output Clock Generator Using Analog PLL and Open-Loop Fractional Divider with 0.13 μm CMOS

A 10-Bit 600-Ms/s Time-Interleaved SAR ADC with Interpolation-Based Timing Skew Calibration

A ΔΣ fractional-N PLL with fast Auto-Frequency Calibration for CMMB tuners

An 8–12ghz 0.92° Phase Error Quadrature Clock Generator Based on Two-Stage Poly Phase Filter with Intermediate Point Compensation

A 2.4-Ghz ISM Band Delta-Sigma Fractional-N Frequency Synthesizer with Automatic Calibration Technique

A 12-Ghz Calibration-Free All-Digital PLL for FMCW Signal Generation with 78 MHz/μs Chirp Slope and High Chirp Linearity.

8-bit 4-Gsps Time-Interleaved ADC Based on Digital Post-Processing Calibration

A Quadrature Clock Generator with Calibration for 22&amp;#x223c;31.4 GS/s Real-Time Sampling System