Abstract:As HDS catalysts, the supported catalysts including oxide state Mo, Co–Mo and sulfide state Mo on carbon nanotube (CNT) were prepared, while the corresponding supported catalysts on γ-Al2O3 were prepared as comparison. Firstly, the dispersion of the active phase and loading capacity of Mo species on CNT was studied by XRD and the reducibility properties of Co–Mo catalysts in oxide state over CNTs were investigated by TPR while the sulfide Co–Mo/CNT catalysts were characterized by XRD and LRS techniques. Secondly, the activity and selectivity of hydrodesulfurization (HDS) of dibenzothiophene with Co–Mo/CNT and Co–Mo/γ-Al2O3 were studied. It has been found that the main active molybdenum species in the oxide state MoO3/CNT catalysts were MoO2, rather than MoO3 as generally expected. The maximum loading before formation of the bulk phase was lower than 6%m (calculated in MoO3). The TPR studies revealed that that active species in oxide state Co–Mo/CNT catalysts were more easily reduced at relatively lower temperatures in comparison to those in Co–Mo/γ-Al2O3, indicating that the CNT support promoted the reduction of active species. Among 0–1.0 Co/Mo atomic ratio on Co–Mo/CNT, 0.7 has the highest reducibility. It shows that the Co/Mo atomic ratio has a great effect on the reducibility of active species on CNT and their HDS activities and that the incorporation of cobalt improved the dispersion of molybdenum species on CNT and mobilization. It was also found that re-dispersion could occur during the sulfiding process, resulting in low valence state Mo3S4 and Co–MoS2.17 active phases. The HDS of DBT showed that Co–Mo/CNT catalysts were more active than Co–Mo/γ-Al2O3 and the hydrogenolysis/hydrogenation selectivity of Co–Mo/CNT catalyst was also much higher than Co–Mo/γ-Al2O3. For the Co–Mo/CNT catalysis system, the catalyst with Co/Mo atomic ratio of 0.7 showed the highest activity, whereas, the catalyst with Co/Mo atomic ratio of 0.35 was of the highest selectivity.

Catalytic hydrodeoxygenation of palmitic acid over a bifunctional Co-doped MoO<sub>2</sub>/CNTs catalyst: an insight into the promoting effect of cobalt

Catalytic hydrodeoxygenation of palmitic acid over a bifunctional Co-doped MoO2/CNTs catalyst: an insight into the promoting effect of cobalt

Effective Hydrodeoxygenation of Palmitic Acid to Diesel-Like Hydrocarbons over MoO 2 /cnts Catalyst

Mechanistic Insights into Hydrodeoxygenation of Acetone over Mo/HZSM-5 Bifunctional Catalyst for the Production of Hydrocarbons

Catalytic HDO of pyrolysis oil in supercritical ethanol with CoMoP and CoMoW catalysts supported on different carbon materials using formic acid as in-situ hydrogen sources

Regulating the Hydrodeoxygenation Activity of Molybdenum Carbide with Different Diamines as Carbon Sources

Structural and electronic effects boosting Ni-doped Mo2C catalyst toward high-efficiency CO/CC bonds cleavage

Towards Conversion of Octanoic Acid to Liquid Hydrocarbon Via Hydrodeoxygenation over Mo Promoter Nickel-Based Catalyst

Effect of reduction temperature on Mo-based catalyst phase and its activity in hydrodeoxygenation reaction

Co3Mo3N as an alternative for noble-metal catalysts in hydrodeoxygenation of methyl palmitate to diesel range hydrocarbons

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Highly stable Mo-based catalysts for selective hydrodeoxygenation to produce diesel-like hydrocarbons

Highly stable Mo-based bimetallic catalysts for selective deoxygenation of oleic acid to fuel-like hydrocarbons

Cobalt-Molybdenum Oxides for Effective Coupling of Ethane Activation and Carbon Dioxide Reduction Catalysis

Carbon nanofibers supported molybdenum carbide catalysts for hydrodeoxygenation of vegetable oils

Hydrodeoxygenation and Hydroisomerization of Palmitic Acid over Bi-Functional Co/H-ZSM-22 Catalysts

Hydrodeoxygenation of vanillin catalyzed by molybdenum carbide supported on activated carbon

Rationalizing Catalytic Performances of Mo/W-(Oxy)Carbides for Hydrodeoxygenation

Upgrading of Palmitic Acid and Hexadecanamide over Co-based Catalysts: Effect of Support (sio2, Γ-Al2o3 and H-ZSM-22)

Nanostructured Molybdenum Carbides Supported on Carbon Nanotubes As Efficient Catalysts for One-Step Hydrodeoxygenation and Isomerization of Vegetable Oils

States of Carbon Nanotube Supported Mo-Based HDS Catalysts