Abstract:Deactivation of a sulfided CoMo/MgAl2O4 catalyst during fluid bed catalytic hydropyrolysis of biomass (beech wood) was studied. The stability of the catalyst was investigated by converting approximately 4.4 kg of biomass and collecting the liquid and solid products for every 1 kg fed, using the same catalyst load. The total time on stream was 16.2 h. A secondary hydrotreating reactor with a sulfided NiMo/Al2O3 catalyst was used after the fluid bed to further deoxygenate the vapors. The condensed organics and C4+ gases yield for each 1 kg fed was 22.2 ± 1 wt %, which was variations within the experimental uncertainty. The CO and CO2 yield during the experiment increased from 14.9 to 18.2 wt % daf, while the aqueous phase yield decreased from 38.0 to 35.1 wt % daf. The change in CO, CO2, and aqueous phase yields was ascribed to a decrease in hydrodeoxygenation activity of the used catalysts. The concentration of oxygen in the condensed organic phase increased from 40 to 2832 ppm, indicating that deactivation of the catalyst in both the fluid bed and the HDO reactor occurred. Our previous study (Stummann etal. Energy Fuels 2019, 33, 1302–1313.) has shown that potassium, a known catalyst poison, is transferred from the beech wood to the catalyst, and the effect of doping the catalyst with 1.9 wt % potassium was therefore also investigated. The results were compared to a similar experiment with a fresh catalyst. Both experiments were performed without the downstream hydrotreating reactor to show the effect on the chemistry in the fluid bed reactor only. This showed that potassium decreased the catalyst's cracking, hydrogenation, and hydrodeoxygenation activity. Doping the catalyst with potassium also increased the char and coke yield from 13.3 to 14.6 wt % daf, indicating that potassium can act as a catalyst for polymerization of the pyrolysis vapors. Overall, the results not only show promise for using CoMo based catalysts for catalytic hydropyrolysis but also indicate that attention should be paid to catalyst deactivation.

Catalytic HDO of pyrolysis oil in supercritical ethanol with CoMoP and CoMoW catalysts supported on different carbon materials using formic acid as in-situ hydrogen sources

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Mechanistic Insights into Hydrodeoxygenation of Acetone over Mo/HZSM-5 Bifunctional Catalyst for the Production of Hydrocarbons

Effects of CoMo/γ-Al2O3 Catalysts on Product Hydrocarbon and Phenol Distribution during Hydrodeoxygenation of Oxidized Bio-Oil in a Batch Reactor

Carbon‐Supported Molybdenum‐Based Catalysts for the Hydrodeoxygenation of Maize Oil

Catalytic hydrodeoxygenation of palmitic acid over a bifunctional Co-doped MoO<sub>2</sub>/CNTs catalyst: an insight into the promoting effect of cobalt

Catalytic hydrodeoxygenation of palmitic acid over a bifunctional Co-doped MoO2/CNTs catalyst: an insight into the promoting effect of cobalt

Catalytic Hydrodeoxygenation of Solar Energy Produced Bio-Oil in Supercritical Ethanol with Mo2C/CNF Catalysts: Effect of Mo Concentration

Selective hydrodeoxygenation of bio-oil model compounds and mixtures over CuCoO x catalysts under mild conditions

Hydrodeoxygenation of Oxygenates Derived from Biomass Pyrolysis Using Titanium Dioxide-Supported Cobalt Catalysts

Highly efficient unsupported Co-doped nano-MoS2 catalysts for p-cresol hydrodeoxygenation

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Improving Both the Activity and Selectivity of CoMo/δ-Al 2 O 3 by Phosphorous Modification for the Hydrodesulfurization of Fluid Catalytic Cracking Naphtha

Selective Hydrodeoxygenation of Lignin-Derived Phenols to Cyclohexanols over Co-Based Catalysts

Co3Mo3N as an alternative for noble-metal catalysts in hydrodeoxygenation of methyl palmitate to diesel range hydrocarbons

Cobalt-Molybdenum Oxides for Effective Coupling of Ethane Activation and Carbon Dioxide Reduction Catalysis

Facile synthesis Cobalt catalysts for regulating the deoxygenation pathways in producing diesel-like hydrocarbon fuels

Deactivation of a CoMo Catalyst during Catalytic Hydropyrolysis of Biomass. Part 1. Product Distribution and Composition

Highly stable Mo-based catalysts for selective hydrodeoxygenation to produce diesel-like hydrocarbons

A stable Pt modified cobalt tungstate catalyst for CO2-assisted oxidative dehydrogenation of ethane

Highly stable Mo-based bimetallic catalysts for selective deoxygenation of oleic acid to fuel-like hydrocarbons