Abstract:The synchronization process takes up almost one half of the time of the gear-shifting process, and also influences the impacts between the sleeve and the gear ring. To avoid impacts and reduce time duration, a time-optimal control strategy with angle alignment is necessary for the synchronization process. Moreover, to be better accord with practice, the motor torque response process should be taken into account. The parameters in the torque response process depend on control commands, which makes the control problem a multistage one. To solve these issues, a rule-based control strategy is extracted from the dynamic programming (DP) solution of the multistage time-optimal control problem. To obtain this strategy, the dynamic model for the synchronization process with a modified Sigmoid model to precisely depict the torque response process is first solved. Then, the control problem is formulated as a multistage time-optimal control problem with three states and solved by DP. Based on the DP results, a three-stage and a four-stage rule-based control strategies are extracted for normal operation situation and startup situation, respectively. Finally, through comparative studies, the proposed rule-based control strategy can eliminate the speed difference and angle difference simultaneously with almost the same time of the bang-bang control, while the bang-bang control cannot obtain the zero terminals. Moreover, the proposed control strategy only takes 20 ms more than the pure speed synchronization control in the worst case. It would decrease when the initial speed difference increases.

Coordinated Nonlinear Speed Control Approach for SI Engine with Alternator Dynamic Performance Can Be Improved, for Vehicles with Spark-Ignition (SI) Engines and Alternators That Handle Heavy Electrical Loads, by Control Design Methods That Consider Both the Engine and the Alternator.

Coordinated Nonlinear Speed Control Approach for SI Engine with Alternator

Speed Sensorless Nonlinear Control Of Pmsm Drives

Engine Control Design Using Globally Linearizing Control and Sliding Mode

Nonlinear Torque Estimation for Vehicular Electrical Machines and Its Application in Engine Speed Control.

Nonlinear control approaches for SI engine model with uncertainties

Adaptive and Learning Control for SI Engine Model With Uncertainties

Nonlinear Speed Sensorless Control Of Pmsm Drives

A Full-Speed Sensorless Control Algorithm For Interior Permanent Magnet Synchronous Motor Using Sliding-Mode Observer And Hf Signal Injection

Nonlinear observer-based torque control for SI engine

An Economic Nonlinear Model Predictive Control Strategy for SI Engines: Model-Based Design and Real-Time Experimental Validation

Adaptive Speed Control Based On Disturbance Compensation For Engine-Dynamometer System

Model based moving horizon optimization control of automotive engine speed

Multistage Time-Optimal Control for Synchronization Process in Electric-Driven Mechanical Transmission with Angle Alignment Considering Torque Response Process

Derivative Speed Feedback Scheme For Improved Speed Control Of Interior Permanent Magnet Synchronous Machine At Overmodulation Region

Design of an SI Engine Cold Start Controller based on Dynamic Coupling Analysis

A Dynamic Coordinated Control Strategy for Mode-Switch of Hybrid Electric Vehicle Based on the Effect Control

Study of Control Algorithm of Eddy Current Dynamometer Controller under N/m Mode

An Enhanced Nonlinear ADRC Speed Control Method for Electric Propulsion System: Modeling, Analysis, and Validation

Control and Simulation of Speed Sensing for an EFI Engine

Minimization of Torque Deviation of Cylinder Deactivation Engine through 48V Mild-Hybrid Starter-Generator Control