Abstract:Since the dead-zone fault in substations often has a relatively long removal time, it may damage the insulation of power equipment and even threaten the stability of the power system. In this paper, the movement of the dead-zone fault electric arc in a 220-kV substation is investigated. The arc chain model for the dead-zone fault electric arc is developed; the influences of electromagnetic force, thermal buoyancy, and the air resistance stressed on the electric arc are comprehensively considered. The electric arc velocity and displacement are computed. Then, the spreading characteristics of the dead-zone electric arc under various conditions are studied. The spreading trend of the dead-zone fault electric arc is summarized. Finally, measures to inhibit the spreading of the electric arc are suggested. The study indicates that the movement of the electric arc in the dead zone during the early stage is primarily influenced by the electromagnetic force resulting from the overpass and conductor, and the arc is concave and has an irregular trajectory. The inclination angle of the conductor significantly affects the direction of the electromagnetic force. If the conductor is laid horizontally, the electric arc is subjected to a smaller force. The electromagnetic force stressed on the electric arc is mainly attributed to the fault phase conductor and the electric arc body itself, whereas those from the other phase conductors are minor. The initial position of the arc root has a certain impact on the movement of the electric arc. The use of the insulating materials restricts the arc root movement.

Movement Simulation of Three-phase Short Circuit Arcs on Distribution Lines Based on the Coupling of Magnetic Field and Motion

Movement Simulation of Three-Phase Short-Circuit Arcs on Distribution Lines Based on the Coupling of Magnetic Field and Motion

Research on Lightning Protection of 220kv Substation with Long Cable Inlet Wire

Performance Simulation of Long-Stator Linear Synchronous Motor for High-Speed Maglev Train under Three-Phase Short-Circuit Fault

Movement simulation of long electric arc along the surface of insulator string in free air

Simulation On Arc Movement Under Effects Of Quenching Chamber Configuration And Magnetic Field For Low-Voltage Circuit Breaker

Numerical Simulation of Arc Motion During Interruption Process of Low-Voltage Circuit Breakers

Simulation and Experimental Research on Air Arc Motion in Low-voltage Circuit Breaker

Simulation of Arc Characteristics in Miniature Circuit Breaker

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker

Propagation Models for Motion Processes of Long Ac Arcs on Overhead Lines

Simulation Experiments and Research of Arc for Low Voltage Circuit Breaker

Simulation Analysis of Arc Evolution Process in Multiple Parallel Contact Systems

MHD Simulation of Tree-line Arc in 10kv Distribution Network

Motion behavior of a high-current fault electric arc occurred in the dead zone of protection in a substation

Simulation study on arc motion process of DC miniature circuit breakers

Study on arc characteristics and combustion feature of tree-wire discharge fault in distribution line

The Research of Electric Arc Simulation in Low Voltage Switching Devices

Simulation and Experiment on Tree-contact Incipient Fault Dynamic Characteristic in the Distribution Network

Simulation of Fault Arc Using Conventional Arc Models

Simulation of the Effects of Several Factors on Arc Plasma Behavior in Low Voltage Circuit Breaker