Abstract:Background The pelvis often needs to be reconstructed after bone tumor resection. A major challenge here for the orthopedic surgeons is to choose a method that gives the best performance which depends upon its biomechanical properties. In this study, a 3-dimensional finite element analysis (FEA) was used to analyze the biomechanical properties of reconstructed pelvis using fibula transplant fixed by four commonly used rod-screw systems.Methods A total pelvic finite-element model including the lumbar-sacral spine and proximal femur was constructed based on the geometry of CT image from a healthy volunteer. Three-dimensional finite element models of different implants including fibula, rod and screw were simulated using ways of solid modeling. Then various reconstructed finite element models were assembled with different finite element implant model and type I resected pelvic finite element model. The load of 500 N was imposed vertically onto the superior surface of L3 vertebral body, and the pelvis was fixed in bilateral leg standing positions. FEA was performed to account for the stress distribution on the bones and implants. The pelvis displacement of the different rod-screw fixation methods and the maximum equivalent stress (max EQV) on all nodes and element were figured out to evaluate the advantages and disadvantages of different reconstructive methods.Results Stress concentration in the fibula transplant was extremely high in the reconstructed pelvis, but could be substantially decreased by internal fixation, which partially transferred the stress from the fibula to the rod-screw systems. High stress concentration was also found in the implants, especially in the connection sites between screw and rod. Among the four methods of fixation, a double rod system with L5-S1 pedicle and ilium screws (L5-S1 HR) produced the best performance: least stress concentrations and least total displacement.Conclusion According to the stability and stress concentration, the method of L5-S1 HR fixation combined with fibula transplantation is better than other fixation methods in pelvic reconstruction after type I resection.

An Integrated Method of Biomechanics Modeling for Pelvic Bone and Surrounding Soft Tissues.

An Investigation of Two Finite Element Modeling Solutions for Biomechanical Simulation Using a Case Study of a Mandibular Bone.

Development of a biofidelic computational model of human pelvis for predicting biomechanical responses and pelvic fractures

Computer Aided Design and Evaluation of New Anatomic Fixation System on Entire Pelvic Model

A FINITE ELEMENT ANALYSIS OF PELVIC RING RECONSTRUCTION WITH FIBULAR AUTOGRAFT FOLLOWING PERIACETABULAR TUMOR RESECTION

Study on Simulation Modeling Method of the Reconstruction Following Resection of Peri-Acetabular Tumors

[Development and validating of a three-dimensional finite element model of total human pelvis].

Dynamic Simulation of Biomechanical Behaviour of the Pelvis in the Lateral Impact Loads.

Construction of a three-dimensional finite element model of the pelvic ring

A Computational-Biomechanical Evaluation of Three Different Functional-Reconstructions with Internal Fixation Following Resection of Peri-Acetabular Tumors

Finite Element Analysis of the Pelvis after Customized Prosthesis Reconstruction

The effect of boundary condition on the biomechanics of a human pelvic joint under an axial compressive load: a three-dimensional finite element model

Construction and Biomechanical Analysis of Integrated Three-Dimensional Optical Model of L3-L4 Segment of Spine

A Finite Element Analysis of the Pelvic Reconstruction Using Fibular Transplantation Fixed with Four Different Rod-Screw Systems after Type I Resection

Finite-element analysis on pelvic biomechanical characteristics after hemipelvic prosthesis replacement combined with lumbar pedicle screw fixation

Bone Geometry on the Contact Stress in the Shoulder for Evaluation of Pressure Ulcers: Finite Element Modeling and Experimental Validation.

A Novel Finite Element Method Based Biomechanical Model for HIT-Robot Assisted Orthopedic Surgery System

Finite Element Modeling and Static/dynamic Validation of Thoracolumbar-Pelvic Segment.

[Three-Dimensional Finite Element Analysis to T-shaped Fracture of Pelvis in Sitting Position].

DYNAMIC RESPONSE OF PELVIC COMPLEX FINITE ELEMENT STUDY AND VALIDATION UNDER SIDE IMPACT

Construction of 3_D Finite Element Model of Human Pelvis