Abstract:Objective: The occupant's pelvis is very vulnerable to side collision in road accidents. Finite element (FE) studies on pelvic injury help to design occupant protection devices to improve vehicle safety. This study was aimed to develop a highly biofidelic pelvis model of Chinese adults and assess its sensitivity to variations in pelvis cortical bone thickness, bone material properties, and loading conditions.Methods: In this study, 4 different FE models of the pelvis were developed from the computed tomography (CT) data of a volunteer representing the 50th percentile Chinese male. Two of them were meshed using entirely hexahedral elements with variable and constant cortical thickness distribution (the V-Hex and C-Hex models), and the others were modeled with hexahedral elements for cancellous bone and variable or constant thickness shell elements for cortical bone (the V-HS and C-HS models). In model developments, the semi-automatic multiblock meshing approach was employed to maintain the pelvis geometric curvature and generate a high-quality hexahedral mesh. Then, several simulations with postmortem human subjects (PMHS) tests were performed to obtain the most accurate model in predicting pelvic injury. Based on the most accurate model, sensitivity studies were conducted to analyze the effects of the cortex thickness, Young's modulus of the cortical and cancellous bone, impactor velocity, and impactor with or without padding on the biomechanical responses and injuries of pelvis.Results: The results indicate that the models with variable cortical bone thickness can give more accurate predictions than those with constant cortical thickness. Both the V-Hex and V-HS models are favorable for simulating pelvic response and injury, but the simulation results of the V-Hex model agree with the tests better. The sensitivity study shows that pelvic response is more sensitive to alterations in the Young's modulus of cortical bone than cancellous bone. Compared to failure displacement, peak force is more sensitive to the cortical bone thickness. However, displacement is more sensitive to the Young's modulus of cancellous bone than peak force. The padding attached on the impactor plays a significant role in absorbing the impact energy and alleviating pelvic injury.Conclusions: The all-hex meshing method with variable cortical bone thickness has the highest accuracy but is time-consuming. The cortical bone plays a determining role in resisting pelvic fracture. Peak impact force appears to be a reasonable injury predictor for pelvic injury assessment. Some appropriate energy absorbers installed in the car door can significantly reduce pelvic injury and will be beneficial for occupant protection.

Development of a biofidelic computational model of human pelvis for predicting biomechanical responses and pelvic fractures

[Development and validating of a three-dimensional finite element model of total human pelvis].

An Integrated Method of Biomechanics Modeling for Pelvic Bone and Surrounding Soft Tissues.

Dynamic Simulation of Biomechanical Behaviour of the Pelvis in the Lateral Impact Loads.

BIOMECHANICAL RESPONSE AND INJURY OF OCCUPANT'S PELVIS IN SIDE IMPACTS: EFFECTS OF THE FEMORAL HEAD AND LOADING CONDITIONS

Finite Element Study of Human Pelvis Model in Side Impact for Chinese Adult Occupants

A FINITE ELEMENT ANALYSIS OF PELVIC RING RECONSTRUCTION WITH FIBULAR AUTOGRAFT FOLLOWING PERIACETABULAR TUMOR RESECTION

DYNAMIC RESPONSE OF PELVIC COMPLEX FINITE ELEMENT STUDY AND VALIDATION UNDER SIDE IMPACT

The effect of boundary condition on the biomechanics of a human pelvic joint under an axial compressive load: a three-dimensional finite element model

Computer Aided Design and Evaluation of New Anatomic Fixation System on Entire Pelvic Model

Development, calibration and validation of impact-specific cervical spine models: A novel approach using hybrid multibody and finite-element methods

Finite Element Modeling and Static/dynamic Validation of Thoracolumbar-Pelvic Segment.

Biomechanical Response of the Pelvis Femur Complex under Lateral Pelvic Impacts During Sideways Falls

Development and Validation of a Three-Dimensional Finite Element Model of Lumbo-Pelvic-Femoral Complex

Three-dimensional finite element simulation of pelvic fracture during side impact with pelvis–femur–soft tissue complex

[Three-Dimensional Finite Element Analysis to T-shaped Fracture of Pelvis in Sitting Position].

Simulating Pelvis Kinematics from Belt and Seat Loading in Frontal Car Crash Scenarios: Important Boundary Conditions that Influence the Outcome

Effects of Loading Conditions on the Pelvic Fracture Biomechanism and Discrimination of Forensic Injury Manners of Impact and Run-Over Using the Finite Element Pelvic Model

Prediction of the Segmental Pelvic Ring Fractures Under Impact Loadings During Car Crash

A Numerical Investigation into the Influence of Hip Posture on Occupant Pelvis Fracture in Vehicle Frontal Impact

Biomechanical research on the statically determinate pelvis under vertical loading