Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

Modeling and suppression of atomic comagnetometer’s response to micro-vibration

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

New Classes of Magnetic Noise Self-Compensation Effects in Atomic Comagnetometer

A Pendulum Actuator for Environmental Vibration Isolation Based on Magnetostrictive Composite Material

Modeling and Control of a Six Degrees of Freedom Maglev Vibration Isolation System

Analysis and Experiment of Vibration Isolation Performance of a Magnetic Levitation Vibration Isolator with Rectangular Permanent Magnets

Active Magnetic-Field Stabilization with Atomic Magnetometer

Magneto-Rheological Visco-Elastomer and Its Application to Suppressing Micro-Vibration of Sandwich Plates

Active Low-frequency Vertical Vibration Isolation System for Precision Measurements

Modeling and Dynamics of Magnetically Repulsive Negative Stiffness Permanent Magnetic Array for Precision Air/Magnetic Composite Vibration Isolation

MICRO-VIBRATION SUPPRESSION OF EQUIPMENT SUPPORTED ON A SANDWICH BEAM INCORPORATING MAGNETO-RHEOLOGICAL ELASTOMER (MRE) CORE

Effects of magnetic field distribution on micro-vibration response of magneto-rheological visco-elastomer based sandwich beam

Analysis and Suppression for Critical Optical Nonorthogonal Noise in SERF Comagnetometers

Suppression of Low Frequency Magnetic Drift Based on Magnetic Field Sensitivity in K-Rb-21Ne Atomic Spin Comagnetometer

A Mobile Three-Dimensional Active Vibration Isolator and Its Application to Cold Atom Interferometry

Modeling and Simulation Analysis of 6-DOF Magnetic Levitation Vibration Isolation Platform

Universal determination of comagnetometer response to spin couplings

Suppression of the vapor cell temperature error in a spin-exchange relaxation-free comagnetometer

Pulsed Dual-axis Alkali-metal-noble-gas Comagnetometer

System Integration and Control Design of a Maglev Platform for Space Vibration Isolation