Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

Modeling and Simulation Analysis of 6-DOF Magnetic Levitation Vibration Isolation Platform

Modeling of a Six-Degree-of-freedom Magnetic Levitation Platform Actuated by Noncontact Lorentz Forces

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Design And Control Of A Novel Six-Dof Maglev Platform For Positioning And Vibration Isolation

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

Modeling and Control of a Six Degrees of Freedom Maglev Vibration Isolation System

Simulation Of Multi-Closed Loop Control With Feed Forward Control Of Micro-Vibration Isolation Platform

System Integration and Control Design of a Maglev Platform for Space Vibration Isolation

Nonlinear dynamics modeling and simulation of maglev vibration isolation system

Dynamic Modeling and Active Vibration Isolation of a Noncontact 6-DOF Lorentz Platform Based on the Exponential Convergence Disturbance Observer

Modeling and Analysis of A Novel Magnetic Levitation Gravity Compensator

Modelling and Stability Analysis for a Magnetically Levitated Slice Motor (MLSM) with Gyroscopic Effect and Non-Collocated Structure Based on the Extended Inverse Nyquist Stability Criterion

Dynamic Modeling and Simulation of 3-D.O.F. Vibration Active Isolation Platform Based on Giant Magnetostrictive Actuators

Modeling and Analysis of a New Cylindrical Magnetic Levitation Gravity Compensator With Low Stiffness for the 6-DOF Fine Stage

Design and optimization of magnetic levitation actuators for active vibration isolation system

Experimental study of active isolation control based on magnetic suspension isolator

Control and experimental study of 6-DOF vibration isolation platform with magnetorheological damper

Active Vibration Isolation of a Maglev Inertially Stabilized Platform Based on an Improved Linear Extended State Observer

Design and Analysis of a 6-DOF Magnetic Suspension Platform with an Improved Permanent Magnetic Array

Analysis and Optimization of a Vibration Isolation Platform Based on 6-DOF Parallel Mechanism

Modeling Identification and Control of a 6-DOF Active Vibration Isolation System Driving by Voice Coil Motors with a Halbach Array Magnet