Abstract:Optimization of the structural and working parameters for a boat-type tractor is essential to improve the working performance and reduce the energy consumption of the agricultural machinery. To apply the central composite rotatable design and response surface method, the individual and interactive impacts of grounding pressure (X-1), sliding speed (X-2), depth of surface water (X-3), curvature radius of the bow (X-4), and grounding angle (X-5) on the sliding resistance and subsidence depth of a self-designed boat-type tractor were assessed. An analysis of variance test indicated that the sliding resistance and subsidence depth were significantly sensitive to all independent variables except X-4, and the contribution rates of a single factor on the sliding resistance and subsidence depth were ordered as X-1 > X-5 > X-2 > X-3 > X-4. The terms X4X5 and X1X5 were the only significant factors (p < 0.05) that affected the sliding resistance and subsidence depth, respectively. Subsequently, the optimal combination of the structural and working parameters for the boat-type tractor on a specific soil was determined. The results suggested that the minimal sliding resistance was 150.71 N, which was obtained when X-1, X-2, X-3, X-4, and X(5 )were 265.2 kg m(2) , 0.52 m s(-1), 2.35 cm, 454.01 mm, and 28.88 degrees, respectively. To verify the working performance of the boat-type tractor with the optimized parameters, laboratory tests were performed on the hull model in soil bins. Using the original working parameters, the sliding resistance and subsidence depth were 165.2 N and 7.1 cm, respectively, which were accordingly optimized to 159.8 N and 6.7 cm with the optimal parameters. Consequently, the sliding resistance was reduced by 5.4 N (3.3%), and the subsidence depth was decreased by 0.4 cm (5.6%), indicating that the working performance of the boat-type tractor was greatly improved.

Resistance Reduction Optimization of an Amphibious Transport Vehicle

Parameter Optimization of the Bio-Inspired Robot Propulsion Through the Deep Learning Based Reduced Order Fluid-Structure Interaction Model

Experimental and CFD investigation on resistance reduction of hydrofoils for amphibious vehicles

Optimization of Center of Gravity Position and Anti-Wave Plate Angle of Amphibious Unmanned Vehicle Based on Orthogonal Experimental Method

Modeling and Operating Point Analysis for Aquatic Translational Motion of a Cross-Medium Vehicle

Boat Trial Validation and Resistance Prediction of a 36-Foot Hydrofoil Catamarans Using CFD

Design and Analysis of Co-axial Twin-Propeller Trans-media Vehicle.

The Shape Design Optimization Simulation of Quadrotor Unmanned Underwater Vehicle for Drag Reduction

Drag reduction configuration analysis of the grooves on amphibious vehicles walking mechanism

Optimizing the Working Performance of a Boat-Type Tractor Using Central Composite Rotatable Design and Response Surface Method

Study on the Resistance of a Large Pure Car Truck Carrier with Bulbous Bow and Transom Stern

Search for universal minimum drag resistance underwater vehicle hull using CFD

Study on the Impact of Tail Wing Profiles on the Resistance Characteristics of Amphibious Vehicles

Computational fluid dynamics-based design optimization of water scooping system in amphibious aircraft by a parallel active learning surrogate model

Drag reduction design and research of high-speed amphibious vehicle’s deformable track wheels

Multi-objective shape optimization of autonomous underwater vehicle by coupling CFD simulation with genetic algorithm

An Efficient Optimization Design Framework for Low-Resistance Shape of Bionic Amphibious Robot

Experimental and Numerical Study on Influence of Wheel Attachments on Resistance Performance of Amphibious Vessel for Marine Debris Collection

Parameters optimization of interconnected hydro-pneumatic suspension for road comfort and road-friendliness based on genetic algorithm

Design Optimization of the Lines of the Bulbous Bow of a Hull Based on Parametric Modeling and Computational Fluid Dynamics Calculation

Multi-objective optimization of an autonomous underwater vehicle shape based on an improved Kriging model