Abstract:A numerical approach is established to study the hydrodynamic performance using an amphibious transport vehicle (ATV) as a research object. Numerical calculation based on the Reynolds average Navier–Stokes method is studied in terms of first layer grid height, surface meshing partition scale, and prismatic layer coefficient. Through uncertainty analysis, the correctness and convergence of the numerical approach are verified. Towing tests are conducted to compare the experimental data with the simulation results, which validated the reliability of the numerical approach under all working conditions. Results show that the numerical approach will affect the simulated results, with an average error of 3.91% for the resistance and 4.21% for the trim, meeting the requirements for analysis accuracy. Based on the proposed numerical approach, an optimization design is carried out to improve the hydrodynamic performance of the ATV. Effects of bow plate angle, stern flap angle, and stern flap install height are studied. Latin hypercube is used for sampling in optimization design, and the Kriging method is applied to establish an approximate model. The cross-validation is carried out using the leave-one-out method. Particle swarm optimization is used for parameter optimization, and the optimized configuration is verified using the numerical approach. Results indicate that the combination of bow plate and stern flap shows excellent improvement in the hydrodynamic performance of amphibious vehicles. Numerical error of the approximate model is only 0.292%, which fully verifies its accuracy and effectiveness. The optimized ATV configuration shows the best drag reduction performance of 38.81% compared to the original model.

Experimental and CFD investigation on resistance reduction of hydrofoils for amphibious vehicles

Boat Trial Validation and Resistance Prediction of a 36-Foot Hydrofoil Catamarans Using CFD

Research on the Resistance and Maneuvering Characteristics of an Amphibious Transport Vehicle and the Influence of Stern Hydrofoil

Research on Shipping Energy-Saving Technology: Hydrofoil Amphibious Vehicle Driven by Waterjet Propulsion

Investigation on Hydrodynamic Evaluation of an Amphibious Transport Vehicle

Numerical Analysis on Hydrodynamic Performance and Hydrofoil Optimization for Amphibious Vehicles

Study on the Impact of Tail Wing Profiles on the Resistance Characteristics of Amphibious Vehicles

Resistance Reduction Optimization of an Amphibious Transport Vehicle

Study and optimization of a deformable trimaran amphibious transport vehicle's resistance characteristic

Design of Hydrofoil for the Resistance Improvement of Planing Boat Based on CFD Technology

Numerical Analysis of Resistance Characteristics for High-speed Amphibious Vehicle Sailing on Water

Influence of Resistance Due to Locomotion Mechanism Configurations of a New High-Speed Amphibious Vehicle (HSAV-Ⅱ)

An Improved Experimental Framework of Amphibious Marine Vehicle Hull Hydrodynamics

Drag Reduction Design and Research of High-Speed Amphibious Vehicle's Deformable Track Wheels

Influence of Flanks on Resistance Performance of High-Speed Amphibious Vehicle

A Review on Drag Reduction Technology: Focusing on Amphibious Vehicles

Drag reduction configuration analysis of the grooves on amphibious vehicles walking mechanism

Research on Hydrodynamic Performance of a Blended Wheel-Track Amphibious Truck Using Experimental and Simulation Approaches

Investigation on the Hydrodynamics of Seaplane Takeoff Process

Hydrodynamic Investigations of a Cross-Domain Vehicle with the Capability of High-Speed Cruising on Water Surface

Drag reduction design and research of high-speed amphibious vehicle’s deformable track wheels