Abstract:Materials with high specific strength and toughness are urgently needed in the fields of electronic packaging, armor, and aerospace. SiC/Al composites show good potential for these applications but the problem of mutual exclusion of strength and toughness still needs to be solved. Herein, we propose a new strategy to simultaneously enhance its strength and toughness from the perspective of structural optimization and interface enhancement. Inspired by the nacre structure, a 3D-(SiC-Si3N4)/Al co-continuous composite was prepared by freeze-casting combined with the pressure infiltration method. During the process, elongated Si3N4 grains were introduced into the ceramic framework to design the internal lamella wall structure and increase the contact area with the aluminum substrate. Moreover, a favorable interfacial bonding was designed between Si3N4 and Al to improve interface wettability. The reliable microstructure of porous 3D-(SiC-Si3N4) preform was tailored through the adjustment of initial solid loading and the alpha-Si3N4 component. The effects of initial solid loading and the alpha-Si3N4 component on the microstructure, interfacial wettability, and mechanical properties of the final composites were investigated. The results showed that the SiC-Si3N4/Al composites possess high flexural strength (769 MPa) and fracture toughness (15.1 MPa m1/2), which is superior to data reported in general literature. Numerous elongated beta-Si3N4 grains are produced on the ceramic skeleton, forming an interlocking structure with the aluminum matrix, which increases the contact area with the aluminum substrate. A chemical reaction layer was formed at the interface of the composite, greatly improving the interfacial bonding strength. This work provides a promising design guideline for developing and optimizing high-strength and tough composite.

Preparation and Characterization of Porcupine-Fish-spine-inspired AZ91/SiC Composites with Radial Lamellar Structures

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Effect of Freeze Speed on the Microstructure and Damage-Tolerance Behavior of Bio-Inspired ZL205A/silicon Carbide Composites

Lamellar-interpenetrated Al–Si–Mg/SiC Composites Fabricated by Freeze Casting and Pressureless Infiltration

Preparation of Nacre-Like Composites by Reactive Infiltration of a Magnesium Alloy into Porous Silicon Carbide Derived from Ice Template

High Damage-Tolerance Bio-Inspired ZL205A/SiC Composites with a Lamellar-Interpenetrated Structure

Preparation and properties of nano-sized SiC particles reinforced AZ91D magnesium matrix composites

Optimization of the Properties in Al/SiC Composites by Tailoring Microstructure Through Gelatin Freeze Casting

Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

Microstructure and Properties of SiCw/SiC Composites Prepared by Gel-Casting Combined with Precursor Infiltration and Pyrolysis

Architectural Engineering Inspired Method of Preparing C-f/ZrC-SiC with Graceful Mechanical Responses

Lamellar and Interpenetrated Al/(Al2O3–TiC) Composites Prepared by Bidirectional Freeze Casting and Melt Infiltration

Strong and Tough 3D-(Sic-si3n4)/al Co-Continuous Composite with Enhanced Interfaces

Influence of SiC Particles on the Microstructure and Mechanical Behaviors of AlMgScZr Alloy Processed by Laser Powder Bed Fusion

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Enhancing Copper Infiltration into Alumina Using Spark Plasma Sintering to Achieve High Performance Al2O3/Cu Composites

Microstructure and Mechanical Properties of Sicp/Az91 Composite Deformed Through A Combination of Forging and Extrusion Process

Preparation of the High Compressive Performance Special-Shaped Csf/AZ91D Composite Part Using the Liquid-Solid Extrusion Following Vacuum Pressure Infiltration Process

Lamellar-interpenetrated Al−Si−Mg/Al2O3−ZrO2 composites prepared by freeze casting and pressureless infiltration

Microstructure, Solidification Defects and Mechanical Properties of High-Modulus and High-Strength SiC/AlSi10Mg Composites Fabricated by Selective Laser Melting

Fabrication and characterization of SiC/Al composites prepared by laser powder bed fusion (LPBF) combined with vacuum pressure infiltration