Abstract:Materials with high specific strength and toughness are urgently needed in the fields of electronic packaging, armor, and aerospace. SiC/Al composites show good potential for these applications but the problem of mutual exclusion of strength and toughness still needs to be solved. Herein, we propose a new strategy to simultaneously enhance its strength and toughness from the perspective of structural optimization and interface enhancement. Inspired by the nacre structure, a 3D-(SiC-Si3N4)/Al co-continuous composite was prepared by freeze-casting combined with the pressure infiltration method. During the process, elongated Si3N4 grains were introduced into the ceramic framework to design the internal lamella wall structure and increase the contact area with the aluminum substrate. Moreover, a favorable interfacial bonding was designed between Si3N4 and Al to improve interface wettability. The reliable microstructure of porous 3D-(SiC-Si3N4) preform was tailored through the adjustment of initial solid loading and the alpha-Si3N4 component. The effects of initial solid loading and the alpha-Si3N4 component on the microstructure, interfacial wettability, and mechanical properties of the final composites were investigated. The results showed that the SiC-Si3N4/Al composites possess high flexural strength (769 MPa) and fracture toughness (15.1 MPa m1/2), which is superior to data reported in general literature. Numerous elongated beta-Si3N4 grains are produced on the ceramic skeleton, forming an interlocking structure with the aluminum matrix, which increases the contact area with the aluminum substrate. A chemical reaction layer was formed at the interface of the composite, greatly improving the interfacial bonding strength. This work provides a promising design guideline for developing and optimizing high-strength and tough composite.

Optimization of the Properties in Al/SiC Composites by Tailoring Microstructure Through Gelatin Freeze Casting

Effect of Freeze Speed on the Microstructure and Damage-Tolerance Behavior of Bio-Inspired ZL205A/silicon Carbide Composites

High Damage-Tolerance Bio-Inspired ZL205A/SiC Composites with a Lamellar-Interpenetrated Structure

Microstructure and Properties of SiCw/SiC Composites Prepared by Gel-Casting Combined with Precursor Infiltration and Pyrolysis

Strong and Tough 3D-(Sic-si3n4)/al Co-Continuous Composite with Enhanced Interfaces

Lamellar-interpenetrated Al–Si–Mg/SiC Composites Fabricated by Freeze Casting and Pressureless Infiltration

Effects of Oxide Addition on the Microstructure and Mechanical Properties of Lamellar SiC Scaffolds and Al–Si–Mg/SiC Composites Prepared by Freeze Casting and Pressureless Infiltration

Optimization of the Microstructure, Mechanical Properties, and Wear Resistance of Nacre-Inspired TiB 2 /Al-Cu Composites Via Gelatin Addition

Mechanical Properties and Toughening Mechanisms of Silicon Carbide Nano-Particulate Reinforced Alon Composites

Influence of characteristic parameters of SiC reinforcements on mechanical properties of AlSi10Mg matrix composites by powder metallurgy

Optimization of the microstructure, mechanical properties, and wear resistance of nacre-inspired TiB2/Al-Cu composites via gelatin addition

Fabrication and mechanical properties of nano-/micro-sized Al2O3/SiC composites

Microstructure, Solidification Defects and Mechanical Properties of High-Modulus and High-Strength SiC/AlSi10Mg Composites Fabricated by Selective Laser Melting

Lamellar and Interpenetrated Al/(Al2O3–TiC) Composites Prepared by Bidirectional Freeze Casting and Melt Infiltration

Microstructures and mechanical properties of carbon fiber reinforced silicon nitride composites prepared by gel-casting

Regulating the Mechanical Properties of (μm B4C+nm SiC)/7075Al Composites Via Nano-Sic Content

Design and fabrication of porous Si3N4-Si2N2O in situ composite ceramics with improved toughness

Microstructures and Tensile Properties of Al–Cu Matrix Composites Reinforced with Nano-Sized SiCp Fabricated by Semisolid Stirring Process

Microstructure And Mechanical Properties Of Two Kinds Of Al2o3/Sic Nanocomposites

Strengthening Mechanism and Damping Properties of SiCf/Al-Mg Composites Prepared by Combining Colloidal Dispersion with a Squeeze Melt Infiltration Process

Optimization of volume fraction and microstructure evolution during thermal deformation of nano-SiCp/Al–7Si composites