Abstract:Thin film deposition of solid electrolytes can be useful for the fabrication of better solid-state batteries by reducing the thickness of the electrolyte material to a few hundred nanometers. This facilitates ionic conductance for faster charge-discharge and reduces the total volume of inactive material, therefore increasing energy and power density. Thin film batteries can also be valuable model systems to investigate interface charge dynamics and to serve as playgrounds for interface engineering, without the complexity of bulk systems. Here we investigate the charge transfer properties between the lithium garnet Li 7 La 3 Zr 2 O 12 (LLZO) solid electrolyte and the LiCoO 2 cathode using a thin-film model system, with the aim of reducing the interface resistance and allowing high charge-discharge rates. Bulk LLZO electrolyte has come under the spotlight owing to its high ionic conductivities (10 -4 - 10 -3 S/cm) as well as a wide electrochemical stability window (against metallic lithium anode and high potential cathode materials). We developed a method for fabricating crystalline LLZO thin films using magnetron co-sputtering followed by an annealing step at 700°C (significantly below the standard processing temperatures). The resulting 500 nm-thick Ga-doped LLZO thin films show densities and ionic conductivities (2×10 -4 S/cm) comparable to the values observed in bulk ceramic pellets.[1] Based on this thin film fabrication process, we fabricated an all-thin-film model system to investigate the LLZO / LCO cathode interface. This architecture provides an easy access to the interface for characterization, allowing one to identify the degradation processes taking place at the interface under high-temperature co-sintering. Introducing an in situ-lithiated Nb 2 O 5 diffusion barrier at the interface, it was possible to lower the LLZO / LCO charge transfer resistance to about 50 Ω cm 2 , a 3-fold reduction with respect to previously reported values. The low interfacial resistance combined with the high conductance through the LLZO thin-film electrolyte allows charge transfer at high charge–discharge rates up to 40 C (0.9 mA/cm 2 ).[2] References [1] Sastre, Jordi, et al. "Lithium Garnet Li7La3Zr2O12 Electrolyte for All‐Solid‐State Batteries: Closing the Gap between Bulk and Thin Film Li‐Ion Conductivities." Advanced Materials Interfaces (2020): 2000425. [2] Sastre, Jordi, et al. "Fast Charge Transfer across the Li7La3Zr2O12 Solid Electrolyte/LiCoO2 Cathode Interface Enabled by an Interphase-Engineered All-Thin-Film Architecture." ACS Applied Materials & Interfaces 12.32 (2020): 36196-36207.

LiCoO2 Sintering Aid Towards Cathode-Interface-enhanced Garnet Electrolytes

Inhibiting Formation and Reduction of Li2 CO3 to LiCx at Grain Boundaries in Garnet Electrolytes to Prevent Li Penetration.

Inhibiting Formation and Reduction of Li2CO3 to LiCx at Grain Boundaries in Garnet Electrolytes to Prevent Li Penetration

Enhanced densification and ionic conductivity of Li-garnet electrolyte: Efficient Li2CO3 elimination and fast grain-boundary transport construction

Unveiling the roles of alumina as a sintering aid in Li‐Garnet solid electrolyte

Co-doping strategy enhanced the ionic conductivity and excellent lithium stability of garnet-type Li7La3Zr2O12 electrolyte in all solid-state lithium batteries

Restrained Li|Garnet Interface Contact Deterioration Manipulated by Lithium Modification for Solid‐State Batteries

All Solid-State Li/LLZO/LCO Battery Enabled by Alumina Interfacial Coating

Achieving Efficient and Stable Interface Between Metallic Lithium and Garnet-Type Solid Electrolyte Through a Thin Indium Tin Oxide Interlayer

Li 2 CO 3 : Insights into Its Blocking Effect on Li-Ion Transfer in Garnet Composite Electrolytes

Fast Charge Transfer between LLZO Solid Electrolyte and LCO Cathode Thin Films with a Modified Interface

Sintering Behavior of Garnet‐type Li6.4La3Zr1.4Ta0.6O12 in Li2CO3 Atmosphere and Its Electrochemical Property

Li2CO3: Insights into Its Blocking Effect on Li-Ion Transfer in Garnet Composite Electrolytes

Liquid sintering of garnet electrolytes by lithium germanate: Properties and interfacial performance with lithium anode

Garnet‐Type Solid‐State Electrolytes: Crystal‐Phase Regulation and Interface Modification for Enhanced Lithium Metal Batteries

Oriented Attachment Strategy Toward Enhancing Ionic Conductivity in Garnet-Type Electrolytes for Solid-State Lithium Batteries.

Amorphous Dual‐Layer Coating: Enabling High Li‐Ion Conductivity of Non‐Sintered Garnet‐Type Solid Electrolyte

Low-Temperature Sintering of a Garnet-Type Li6.5La3Zr1.5Ta0.5O12 Solid Electrolyte and an All-Solid-State Lithium-Ion Battery.

Transformation of Undesired Li 2 CO 3 into Lithiophilic Layer Via Double Replacement Reaction for Garnet Electrolyte Engineering

In Situ Fabrication of High Ionic and Electronic Conductivity Interlayers Enabling Long-Life Garnet-Based Solid-State Lithium Batteries

Submicron-Sized Nb-Doped Lithium Garnet for High Ionic Conductivity Solid Electrolyte and Performance of Quasi-Solid-State Lithium Battery