Abstract:An extended crystal plasticity model and an optimized neural network are established to investigate the mechanical behavior of CoCrNiSi 0.3 C 0.048 Medium entropy alloy (MEA) with a three-level hierarchical precipitation structure under dynamic compressive deformation at a variety of ranges of strain rates. The interaction between the matrix and first-level precipitates is described by a presented hybrid representative volume element RVE model, involving the effects of volume fraction (Vf), radius and geometric distribution on heterogeneous deformation. Effects of second- and third-level precipitates are realized through the extended crystal plasticity constitutive model, reflecting the motion mechanism of dislocations near the precipitates in the form of initial slip resistance. Meanwhile, this study investigates the influence of the presence of primary precipitates on the initiation of slip systems within special grains with Goss or S orientations in the matrix. Additionally, it provides a more in-depth explanation of the underlying principles behind the suppression of Goss texture formation by the precipitates from the perspective of slip systems analysis. The changing of volume fractions affects flow stress evolution. Avoiding suffering from expensive computational consumption by the crystal plasticity finite element method, an artificial neural network model optimized through a genetic algorithm, is presented to predict stress-strain responses and texture evolution results under varying compression strain rates. A reliable dataset derived from crystal plasticity finite element models and experimental results is utilized to train, test, and validate the genetic algorithm-based artificial neural network model. This model demonstrates good prediction capability in dynamic mechanical behavior and texture evolution, showcasing the feasibility and efficacy of the proposed neural network model. Compared to the CPFEM method, neural network models can greatly improve computational efficiency.

Elasticity-mechanics-informed generative adversarial networks for predicting the thermal strain of thermal barrier coatings penetrated by CaO-MgO-Al2O3-SiO2

Thermal Deformation Defect Prediction for Layered Printing Using Convolutional Generative Adversarial Network

A Thermodynamics-Informed Neural Network for Elastoplastic Constitutive Modeling of Granular Materials

Enhancing Mechanical Behavior Assessment in Porous Thermal Barrier Coatings using a Machine Learning Fine-Tuned with Genetic Algorithm

Theoretical Prediction of Thermal Expansion Anisotropy for Y2Si2O7 Environmental Barrier Coatings Using a Deep Neural Network Potential and Comparison to Experiment

Towards Full Ab Initio Simulations of Mechanical Response of Ti-N Binary System under Extremely Operational Conditions Via Neural Network Potential

Thermal Field Prediction for Welding Paths in Multi-Layer Gas Metal Arc Welding-Based Additive Manufacturing: A Machine Learning Approach

Prediction of Microstructure and Mechanical Properties of Atmospheric Plasma-Sprayed 8YSZ Thermal Barrier Coatings Using Hybrid Machine Learning Approaches

Microstructural evolution and constitutive analysis of Al-Mg-Zn-Er-Zr based on arrhenius-type and machine-learning algorithm

Failure prediction of thermal barrier coatings on turbine blades under calcium-magnesium-alumina-silicate corrosion and thermal shock

Numerical and experimental investigation of the dynamic mechanical behavior of precipitation-strengthed NiCoCrSi 0.3 C 0.048 medium-entropy alloy

Prediction of mechanical solutions for a laminated LCEs system fusing an analytical model and neural networks

Thermal Conductivity Prediction in Air Plasma Sprayed Thermal Barrier Coatings Containing Multifarious Defects

Competition of systematically optimized deep neural networks for the estimation of tensile behavior of aluminum-magnesium alloy

Prediction of In-Flight Particle Properties and Mechanical Performances of HVOF-Sprayed NiCr-Cr3C2 Coatings Based on a Hierarchical Neural Network

Strain distribution prediction in UHPC beams using deep learning model

Nondestructive Evaluation of Thermal Barrier Coatings Thickness Using Terahertz Time-Domain Spectroscopy Combined with Hybrid Machine Learning Approaches

Mechanistic data-driven prediction of as-built mechanical properties in metal additive manufacturing

Coupled machine-learning approach and thermoelasticity for analyzing thermal stability of the nanocomposite sandwich system

An Effective Model for the Elastic Behavior of Two-Phase Materials Based on Structural Recognition

Application of neural network in micromechanical deformation behaviors of Inconel 740H alloy