Abstract:Na3V2(PO4)3 (NVP) has been deemed to be a prospective cathode for sodium ion batteries (SIBs) duo to its high structural stability and flat voltage platform. Herein, a series of K/Co co-doped NVP composites with optimized sodium storage property are produced via a feasible sol-gel method. Significantly, the introduced K+ has substituted of Na+ at Na1 site, strictly demonstrated by the Rietveld refinement results. Meanwhile, this substitution has hardly influence on the reversible de/insertion of Na+ situated at Na2 site. Moreover, the beneficial K+ with larger ionic radius can act as the pillar ion to improve the structural stability efficiently. Furthermore, the replacement of V3+ by Co2+ facilitates to enlarging the interplanar spacing in crystal structure, resulting in accelerating the Na+ migration effectively. Moreover, substitution with low valence element (Co2+ vs. V3+) can generate the favorable holes to increase the intrinsic electronic conductivity. Notably, doping with appropriate content of K/Co elements favors to reduce the particle size and shorten the pathway for Na+ transformation, distinctly boosting the apparent ionic diffusivity. Specifically, K/Co co-doping induces to forming the unique mesoporous morphology, immensely enlarging the specific surface area of active grains and therefore facilitating the infiltration between the particles and electrolyte. Comprehensively, the optimized K0.1Co0.05-NVP/C exhibits an outstanding electrochemical performance. It shows a high initial capacity of 122.7 mA h g−1 at 0.1 C, which is higher than the theoretical value of NVP (117.6 mA h g−1). It can release an initial capacity of 100.9 mA h g−1 at 1 C and maintain 71.0 mA h g−1 after 500 cycles. Moreover, the reversible capacity can be achieved as 98.8 mA h g−1 at a high rate of 10 C and a favorable retention of 75.9% can be obtained after 400 cycles. Besides, the kinetic characteristics for the modified K0.1Co0.05-NVP/C cathode are superior than those of pristine NVP/C. Specifically, it reveals a relatively high diffusion coefficient of Na+ (0.53 × 10−10 cm2 s−1). Thus, the modified K/Co co-doped NVP/C sample can be a promising cathode material for SIBs.

Defect Regulation of Co2+ Substituting V3+ in Na3V2(PO4)3 for Superior Sodium Storage Performance: Experimental and Theoretical Study

Simultaneous Defect Regulation by P-N Type Co-Substitution in a Na3V2(PO4)3/C Cathode for High Performance Sodium Ion Batteries.

Constructing P-Type Substitution Induced by Ca2+ in Defective Na3V2-xCax(PO4 )3/C Wrapped with Conductive CNTs for High-Performance Sodium-Ion Batteries

Simultaneous Modification of Na-rich and Ca2+/Ni2+ Dual-Substitution Boosting Superior Electrochemical Performance of Na3V2(PO4)3

Unraveling the modified regulation of ternary substitution on Na3V2(PO4)(3) for sodium ion batteries

Inducing Extra Active Sites by Lu3+ Substitution at Na1 Location to Achieve Enhanced Ultra-Long Lifespan of Na3V2(PO4)3

Constructing hierarchical heterojunction structure for K/Co co-substituted Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> by integrating carbon quantum dots

Constructing Optimized Framework with High Structural Reversibility and Small Volume Shrinkage by Nd3+ Substitution for Na3V2(PO4)3 Cathode

Induction of Brand New Na3 Sites Constructing High Performance Na3V2(PO4)3 with Low Strain Property and High Thermal Safety

Boosting the rate capability and working lifespan of K/Co co-doped Na3V2(PO4)3/C for sodium ion batteries

Simultaneous zirconium substitution and polypyrrole interconnection of Na3V2(PO4)3/C nanoparticles for superior sodium storage performance

Constructing Dimensional Gradient Structure of Na3V2(PO4)3/C@CNTs-WC by Wolfram Substitution for Superior Sodium Storage

Synergistically Boosting Sodium-Storage Performance of Na3V2(PO4)3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Simultaneous Mn and Cl Doping on Na3V2(PO4)3 with High Performance for Full Sodium-Ion Batteries.

Highly Reversible Na Storage in Na3V2(PO4)3 by Optimizing Nanostructure and Rational Surface Engineering

Optimizing quasi-solid-state sodium storage performance of Na3V2(PO4)2F2.5O0.5 cathode by structural design plus nitrogen doping

Constructing hierarchical heterojunction structure for K/Co co-substituted Na3V2(PO4)3 by integrating carbon quantum dots

Diatomic Doped Carbon Coating Boosting the High-Rate Performance and Super Long-Cycle Stability of Na3v2(Po4)3 Cathode Material

In-situ constructing Co/Mo co-doped Na3V2(PO4)3 with coral cluster porous structure boosting high performance for sodium ion batteries

Accelerating the electrochemical kinetics of Na3V2(PO4)3 cathode for high-performance sodium ion batteries with superior cycling stability by Cl− substitution

Nitrogen‐Doping‐Induced Defects of a Carbon Coating Layer Facilitate Na‐Storage in Electrode Materials