Abstract:Na3V2(PO4)3 (NVP) has been deemed to be a prospective cathode for sodium ion batteries (SIBs) duo to its high structural stability and flat voltage platform. Herein, a series of K/Co co-doped NVP composites with optimized sodium storage property are produced via a feasible sol-gel method. Significantly, the introduced K+ has substituted of Na+ at Na1 site, strictly demonstrated by the Rietveld refinement results. Meanwhile, this substitution has hardly influence on the reversible de/insertion of Na+ situated at Na2 site. Moreover, the beneficial K+ with larger ionic radius can act as the pillar ion to improve the structural stability efficiently. Furthermore, the replacement of V3+ by Co2+ facilitates to enlarging the interplanar spacing in crystal structure, resulting in accelerating the Na+ migration effectively. Moreover, substitution with low valence element (Co2+ vs. V3+) can generate the favorable holes to increase the intrinsic electronic conductivity. Notably, doping with appropriate content of K/Co elements favors to reduce the particle size and shorten the pathway for Na+ transformation, distinctly boosting the apparent ionic diffusivity. Specifically, K/Co co-doping induces to forming the unique mesoporous morphology, immensely enlarging the specific surface area of active grains and therefore facilitating the infiltration between the particles and electrolyte. Comprehensively, the optimized K0.1Co0.05-NVP/C exhibits an outstanding electrochemical performance. It shows a high initial capacity of 122.7 mA h g−1 at 0.1 C, which is higher than the theoretical value of NVP (117.6 mA h g−1). It can release an initial capacity of 100.9 mA h g−1 at 1 C and maintain 71.0 mA h g−1 after 500 cycles. Moreover, the reversible capacity can be achieved as 98.8 mA h g−1 at a high rate of 10 C and a favorable retention of 75.9% can be obtained after 400 cycles. Besides, the kinetic characteristics for the modified K0.1Co0.05-NVP/C cathode are superior than those of pristine NVP/C. Specifically, it reveals a relatively high diffusion coefficient of Na+ (0.53 × 10−10 cm2 s−1). Thus, the modified K/Co co-doped NVP/C sample can be a promising cathode material for SIBs.

Constructing hierarchical heterojunction structure for K/Co co-substituted Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> by integrating carbon quantum dots

Constructing hierarchical heterojunction structure for K/Co co-substituted Na3V2(PO4)3 by integrating carbon quantum dots

Boosting the rate capability and working lifespan of K/Co co-doped Na3V2(PO4)3/C for sodium ion batteries

Activating the Extra Redox Couple of Co<SUP>2+</SUP>/Co<SUP>3+</SUP> for a Synergistic K/Co Co-Substituted and Carbon Nanotube-Enwrapped Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> Cathode with a Superior Sodium Storage Property

Activating the Extra Redox Couple of Co 2+ /Co 3+ for a Synergistic K/Co Co-Substituted and Carbon Nanotube-Enwrapped Na 3 V 2 (PO 4 ) 3 Cathode with a Superior Sodium Storage Property

Simultaneous Optimization of K/Co Co-Substituted Na3V2(PO4)3/C Nano Particles Enwrapped on Lamellar Rgo Substrate with High Performance for Asymmetric Sodium Ion Full Cell

Diatomic Doped Carbon Coating Boosting the High-Rate Performance and Super Long-Cycle Stability of Na3v2(Po4)3 Cathode Material

Construction of simultaneous modified Na<sub>3</sub>V2(PO<sub>4</sub>)<sub>3</sub>/C cathode with K/Zr substitution and carbon nanotubes enwrapping for high performance sodium ion battery

Constructing P-Type Substitution Induced by Ca2+ in Defective Na3V2-xCax(PO4 )3/C Wrapped with Conductive CNTs for High-Performance Sodium-Ion Batteries

Simultaneous Defect Regulation by P-N Type Co-Substitution in a Na3V2(PO4)3/C Cathode for High Performance Sodium Ion Batteries.

Synergistically Boosting Sodium-Storage Performance of Na3V2(PO4)3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

In-situ constructing Co/Mo co-doped Na3V2(PO4)3 with coral cluster porous structure boosting high performance for sodium ion batteries

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Constructing Optimized Framework with High Structural Reversibility and Small Volume Shrinkage by Nd3+ Substitution for Na3V2(PO4)3 Cathode

Outstanding electrochemical performance of N/S co-doped carbon/Na3V2(PO4)3 hybrid as the cathode of a sodium-ion battery

Construction of Three-Dimensional Electronic Interconnected Na3V2(PO4)3/C As Cathode for Sodium Ion Batteries

High-rate performance and super long-cycle stability of Na3V2(PO4)3 cathode material coated by diatomic doped carbon

<i>In</i>-<i>situ</i> structural evolution analysis of Zr-doped Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>2</sub>F<sub>3</sub> coated by N-doped carbon layer as high-performance cathode for sodium-ion batteries

Defect Regulation of Co2+ Substituting V3+ in Na3V2(PO4)3 for Superior Sodium Storage Performance: Experimental and Theoretical Study

Carbon coated Na3+xV2-xCux(PO4)3@C cathode for high-performance sodium ion batteries

Anchored VN Quantum Dots Boosting High Capacity and Cycle Durability of Na3V2(PO4)3@NC Cathode for Aqueous Zinc‐Ion Battery and Organic Sodium‐Ion Battery