Abstract:The indirect tensile test plays a crucial role in experimental investigations of brittle material properties. In this study, a mechanical analysis model of the rectangular test block is established based on the theory of elastic mechanics for the characteristics of the indirect tensile test. The theoretical solution of the triangular series is derived for the rectangular test block under the locally distributed load. The finite element simulation results and splitting test results were compared with the theoretical results. The results of the study verify the accuracy of the theoretical solutions. Based on the proposed analytical solution, the effects of loading width and length-to-height ratio (h/l) of local loading on the measured tensile strength of test block are discussed. The results demonstrate that the tensile strength of the test block increases as the loading width expands, and the rate of growth in the recorded tensile strength gradually stabilizes. The variation in loading width affects the location of crack initiation points during the concrete test block splitting tests. When the loading width exceeds 6% of the side length of test block, the cracking point is positioned at the center of test block, ensuring the effectiveness of the splitting test. As the length-to-height ratio of the test block increases, there is a general upward trend in the measured tensile strength. When h/l 0.6, the measured tensile strength consistently increases, with the rate of increase gradually diminishing until it stabilizes. The length-to-height ratio also significantly influences the location of the cracking point in the test block. As the length-to-height ratio increases, the cracking point initially shifts from around the center to the central point and then further from the center toward the edge. To ensure that the location of the crack initiation point is in the center of the specimen and that the tensile strength is close to the measured result, the length to height ratio can be chosen at around 0.85.

An Inverse Analysis Method for Determining Tensile Softening Relationship of Concrete Considering Local Response

Numerical Analysis of Softening Relationship for Early-Age Concrete

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

A new method for determining the tension-softening curve of concrete

Two Methods for Determining Softening Relationships of Dam Concrete and Wet-Screened Concrete

Numerical simulation of cracking of early-age concrete three-point beams

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

A METHOD TO SOLVE TENSION SOFTENING RELATIONSHIP OF CONCRETE FROM THE THREE-POINT BENDING TEST

Evaluation of Fracture Parameters of Concrete from Bending Test Using Inverse Analysis Approach

Solving the cohesive zone model analytic function for concrete based on wedge-splitting test on a compact tension specimen

Nonlinear Inverse Analysis for Predicting the Tensile Properties of Strain-Softening and Strain-Hardening UHPFRC

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Theoretical Investigation on Indirect Tensile Strength of Concrete with Rectangular Cross-Section under Locally Distributed Load

Local Arc-length Method of Strain-Softening and Nonlinear in Concrete Structure Material

Experimental study on fracture properties of self-compacting concrete

Finite element analyses of failure of fiber reinforced polymer-concrete interface considering the concrete tension–compression softening effect

Dynamic Tensile Experiments of Concrete and Its Data Analysis Method

Wedge-splitting tests for tensile strength and fracture toughness of concrete

Determination of the fracture parameters of concrete with improved wedge-splitting testing