Abstract:Low-temperature direct ammonia fuel cells (DAFCs) use carbon-neutral ammonia as a fuel, which has attracted increasing attention recently due to ammonia's low source-to-tank energy cost, easy transport and storage, and wide availability. However, current DAFC technologies are greatly limited by the kinetically sluggish ammonia oxidation reaction (AOR) at the anode. Herein, we report an AOR catalyst, in which ternary PtIrZn nanoparticles with an average size of 2.3 ± 0.2 nm were highly dispersed on a binary composite support comprising cerium oxide (CeO2) and zeolitic imidazolate framework-8 (ZIF-8)-derived carbon (PtIrZn/CeO2-ZIF-8) through a sonochemical-assisted synthesis method. The PtIrZn alloy, with the aid of abundant OHad provided by CeO2 and uniform particle dispersibility contributed by porous ZIF-8 carbon (surface area: ∼600 m2 g−1), has shown highly efficient catalytic activity for the AOR in alkaline media, superior to that of commercial PtIr/C. The rotating disk electrode (RDE) results indicate a lower onset potential (0.35 vs. 0.43 V), relative to the reversible hydrogen electrode at room temperature, and a decreased activation energy (∼36.7 vs. 50.8 kJ mol−1) relative to the PtIr/C catalyst. Notably, the PtIrZn/CeO2-ZIF-8 catalyst was assembled with a high-performance hydroxide anion-exchange membrane to fabricate an alkaline DAFC, reaching a peak power density of 91 mW cm−2. Unlike in aqueous electrolytes, supports play a critical role in improving uniform ionomer distribution and mass transport in the anode. PtIrZn nanoparticles on silicon dioxide (SiO2) integrated with carboxyl-functionalized carbon nanotubes (CNT–COOH) were further studied as the anode in a DAFC. A significantly enhanced peak power density of 314 mW cm−2 was achieved.

High-performance Precious Metal-Free Direct Ammonia Fuel Cells Endowed by Co-doped Ni4Cu1 Anode Catalysts

Nickel-cobalt Bimetallic Anode Catalysts for Direct Urea Fuel Cell.

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

A symmetric direct ammonia fuel cell using ternary NiCuFe alloy embedded in carbon network as electrodes

Electrochemical Properties of Rare-Earth Based Hydrogen Storage Alloy for Replacing Pt As the Anode Electrocatalyst in AFC

Improving cell performance for anion exchange membrane fuel cells with FeNC cathode by optimizing ionomer content

A Highly Stable Cu(OH)2-Poly(vinyl Alcohol) Nanocomposite Membrane for Dramatically Enhanced Direct Borohydride Fuel Cell Performance

Ptirm (M=Zn, Ni) Ammonia Oxidation Catalysts for Anion-Exchange Membrane Direct Ammonia Fuel Cells

Activating and stabilizing the surface of anode for high-performing direct-ammonia solid oxide fuel cells

Exsolved Nanoparticles Decorated Double Perovskites as High-Performance Anodes for Direct-Ammonia Solid Oxide Fuel Cells

Self‐construction of Efficient Interfaces Ensures High‐performance Direct Ammonia Protonic Ceramic Fuel Cells

Highly Active and Durable Metal‐Free Carbon Catalysts for Anion‐Exchange Membrane Fuel Cells

Optimization of the Cathode Catalyst Layer for Boosting Direct Ammonia Fuel Cell Performance by Orthogonal Tests

Ultra-Small High-Entropy Alloy as Multi-Functional Catalyst for Ammonia Based Fuel Cells

Performance of direct ammonia fuel cell with PtIr/C, PtRu/C, and Pt/C as anode electrocatalysts under mild conditions

Highly Dispersed Palladium Nanoparticles on Carbon-Decorated Porous Nickel Electrode: an Effective Strategy to Boost Direct Ethanol Fuel Cell Up to 202 Mw Cm–2

In Situ Exsolved CoFeRu Alloy Decorated Perovskite as An Anode Catalyst Layer for High‐Performance Direct‐Ammonia Protonic Ceramic Fuel Cells

Porous Ni–Cu Alloy Dendrite Anode Catalysts with High Activity and Selectivity for Direct Borohydride Fuel Cells

Advanced Design Strategies for Highly Efficient and Durable Anodes in Direct Ammonia Solid Oxide Fuel Cells

Optimizing Fe‐3d Electron Delocalization by Asymmetric Fe–Cu Diatomic Configurations for Efficient Anion Exchange Membrane Fuel Cells

Efficient ammonia conversion in proton conducting fuel cells: Combined application of dendritic anodes and nanofiber catalysts