Abstract:Low-temperature direct ammonia fuel cells (DAFCs) use carbon-neutral ammonia as a fuel, which has attracted increasing attention recently due to ammonia's low source-to-tank energy cost, easy transport and storage, and wide availability. However, current DAFC technologies are greatly limited by the kinetically sluggish ammonia oxidation reaction (AOR) at the anode. Herein, we report an AOR catalyst, in which ternary PtIrZn nanoparticles with an average size of 2.3 ± 0.2 nm were highly dispersed on a binary composite support comprising cerium oxide (CeO2) and zeolitic imidazolate framework-8 (ZIF-8)-derived carbon (PtIrZn/CeO2-ZIF-8) through a sonochemical-assisted synthesis method. The PtIrZn alloy, with the aid of abundant OHad provided by CeO2 and uniform particle dispersibility contributed by porous ZIF-8 carbon (surface area: ∼600 m2 g−1), has shown highly efficient catalytic activity for the AOR in alkaline media, superior to that of commercial PtIr/C. The rotating disk electrode (RDE) results indicate a lower onset potential (0.35 vs. 0.43 V), relative to the reversible hydrogen electrode at room temperature, and a decreased activation energy (∼36.7 vs. 50.8 kJ mol−1) relative to the PtIr/C catalyst. Notably, the PtIrZn/CeO2-ZIF-8 catalyst was assembled with a high-performance hydroxide anion-exchange membrane to fabricate an alkaline DAFC, reaching a peak power density of 91 mW cm−2. Unlike in aqueous electrolytes, supports play a critical role in improving uniform ionomer distribution and mass transport in the anode. PtIrZn nanoparticles on silicon dioxide (SiO2) integrated with carboxyl-functionalized carbon nanotubes (CNT–COOH) were further studied as the anode in a DAFC. A significantly enhanced peak power density of 314 mW cm−2 was achieved.

Self‐construction of Efficient Interfaces Ensures High‐performance Direct Ammonia Protonic Ceramic Fuel Cells

In Situ Exsolved CoFeRu Alloy Decorated Perovskite as An Anode Catalyst Layer for High‐Performance Direct‐Ammonia Protonic Ceramic Fuel Cells

Activating and stabilizing the surface of anode for high-performing direct-ammonia solid oxide fuel cells

Efficient ammonia conversion in proton conducting fuel cells: Combined application of dendritic anodes and nanofiber catalysts

Exsolved Nanoparticles Decorated Double Perovskites as High-Performance Anodes for Direct-Ammonia Solid Oxide Fuel Cells

Effect of increasing Fe catalytic decomposition layer of ammonia on the performance and stability of ammonia electrode

Enhanced Stability and Electrochemical Investigations of Ni/Zsm-5 Catalyst Layer on Nickel-Based Anodes for Ammonia-Fed Solid Oxide Fuel Cells

A New Pd Doped Proton Conducting Perovskite Oxide with Multiple Functionalities for Efficient and Stable Power Generation from Ammonia at Reduced Temperatures

Direct Conversion of Ammonia to Electricity on a PCFC and an SOFC

An interesting application-oriented design of high-strength anode support for protonic ceramic fuel cells by a non-proton-conducting cermet

Advanced Design Strategies for Highly Efficient and Durable Anodes in Direct Ammonia Solid Oxide Fuel Cells

A High-Performance and Durable Direct-Ammonia Symmetrical Solid Oxide Fuel Cell with Nano La0.6Sr0.4Fe0.7Ni0.2Mo0.1O3−δ-Decorated Doped Ceria Electrode

Improved Performance of Ammonia-Fueled Solid Oxide Fuel Cell with Ssz Thin Film Electrolyte and Ni-Ssz Anode Functional Layer

A Rational Design of FeNi Alloy Nanoparticles and Carbonate-Decorated Perovskite As a Highly Active and Coke-Resistant Anode for Solid Oxide Fuel Cells

Performance Evaluation of Ammonia-Fueled Flat-Tube Solid Oxide Fuel Cells with Different Build-in Catalysts

Infiltrated NiCo Alloy Nanoparticle Decorated Perovskite Oxide: A Highly Active, Stable, and Antisintering Anode for Direct-Ammonia Solid Oxide Fuel Cells.

Fabrication And Performance Of Anode-Supported Proton Conducting Solid Oxide Fuel Cells Based On Bazr0.1ce0.7y0.1yb0.1o3-Delta Electrolyte By Multi-Layer Aqueous-Based Co-Tape Casting

A symmetric direct ammonia fuel cell using ternary NiCuFe alloy embedded in carbon network as electrodes

Ptirm (M=Zn, Ni) Ammonia Oxidation Catalysts for Anion-Exchange Membrane Direct Ammonia Fuel Cells

An Efficient Construction of Nano-Interfaces for Excellent Coking Tolerance of Cermet Anodes

Nickel Doping Manipulation Towards Developing High-Performance Cathode for Proton Ceramic Fuel Cells