Abstract:High-volume-fraction SiC/Al (HVF-SiC/Al) composites have a wide range of applications in aerospace, optics, automotive and electronic packaging. However, because the hardness, brittleness and wear resistance increase with the increase in the volume fraction, it is difficult for traditional methods such as machining, to process HVF-SiC/Al composites to complex components. Therefore, in this paper, a novel method of the hybrid additive manufacturing is proposed to fabricate complex-structures SiC/Al composite parts. The effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of HVF-SiC/Al composites is investigated. The results show that the mechanical properties of the SiC preforms can be effctively enhanced by the PIP process, and this enhancement makes the SiC preforms meet the conditions for subsequent vacuum-pressure infiltration. The mechanical property of HVF-SiC/Al composites show a huge increase when in creasing the volume fraction of SiC. In particular, the flexural strength of HVF-SiC/Al composites increased from 202.28 MPa to 380.87 MPa, and the coefficient of thermal expansion (CTE) has also been reduced from 11.80 to 6.28 × 10 -6 /K, when the volume fraction of SiC increases from 42 to 80 vol%. For optimise the PIP process in the future, three theoretical models are used to predict the relationship between the CTE and the volume fraction of SiC. The results show that the experimental data are more consistent with the predicted values based on the Kerner's model, but deviate from the Rule-of-mixture (ROM) and Turner's models. Importantly, the complex-structures SiC/Al composite parts was successfully fabricated by this hybrid additive manufacturing.

High Performance SiC/SiOC Composites with in Situ Carbon Interface

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

In-situ SiC nanowires reinforced SiC-based multicomponent ceramic coating for protecting SiOC/CF composites

A Review on High-Performance SiC f /SiC Composites Prepared by PIP Process

Direct Ink Writing of Chopped Carbon Fibers Reinforced Polymer-derived SiC Composites with Low shrinkage and High Strength

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Structure and properties of fine diameter continuous SiC ceramic fiber reinforced Al matrix composites

Building SiC-based composites from polycarbosilane-derived 3D-SiC scaffolds via polymer impregnation and pyrolysis (PIP)

Effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of high volume fraction SiC/Al composites prepared by a novel hybrid additive manufacturing

Residual stress and interface debonding behavior in Si3N4w reinforced SiCN composites prepared by the PIP process: A case study

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Additive manufacturing of continuous carbon fiber-reinforced silicon carbide composite by fused filament fabrication and precursor infiltration pyrolysis

Preparation and Properties of Porous SiC/SiC Composites

A high-strength SiCw/SiC–Si composite derived from pyrolyzed rice husks by liquid silicon infiltration

Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires

Fabrication and Mechanical Properties of SiCw(p)/SiC-Si Composites by Liquid Si Infiltration using Pyrolysed Rice Husks and SiC Powders as Precursors

Siliconization elimination for SiC coated C/C composites by a pyrolytic carbon coating and the consequent improvement of the mechanical property and oxidation resistances