Abstract:Polymer composites with highly thermally conductive and electrical insulation are urgently demanded for thermal management in modern electrical and energy applications. However, the incorporation of metal fillers in traditional polymeric composites usually fails to meet the requirements for simultaneously high thermal conductivity and high electrical insulation. Here, we successfully fabricated composites with high thermal conductivity and high electrical insulation by in situ thermal expansion of expandable graphite (EG) and in situ oxidation of aluminum (Al) nanoflakes in aluminum-plastic package waste (APPW). Due to the synergistic effect of the hybrid filler framework, the maximum thermal conductivity reached as high as 8.7 W m–1 K–1 for APPW/EG10/Al60-F composites. In addition, the formation of the nano Al2O3 layer around the Al filler surface brings extremely low electrical conductivity (<10–14 S cm–1) and low dielectric loss (<0.06). Based on the results of finite element simulation, the heat flowed mainly along the effective filler framework and the high thermal conductivity is attributed to the interconnection of the high aspect ratio filler. Furthermore, the strong thermal management capability of the prepared composites was demonstrated in the heat dissipation experiment. The present work suggests that surface-oxidized Al nanoflakes demonstrate fascinating performance and show promising application as thermal management materials in emerging electrical systems and electronic devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18603?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18603</a>.SEM images of expandable graphite (Figure S1); FTIR absorbance data of carbon dioxide in APPW/EG/Al-F composites (Figure S2); XRD pattern of the APPW/EG composite prepared by melt blend under 200 °C (Figure S3); TGA and DTG curves of APPW/EG/Al composites (Figure S4); SEM images of the fracture surface of composites (Figure S5); TEM images of graphite nanosheets in APPW/EG10/Al30-F composites (Figure S6); TEM images of as-received Al platelet (Figure S7); volume resistivity of APPW/EG composites (Figure S8); APPW/EG10/Al60-S at different cooling times at insulating foam within 1 min (Figure S9); dielectric permittivity and dielectric loss of composites at 1k Hz (Figure S10); dielectric permittivity, dielectric loss, and electric conductivity of composites at different temperatures at 1k Hz (Figure S11); list of samples and their codes for different EG and Al loadings (Table S1); calculated electrical conductivity, electronic thermal conductivity, and phonon thermal conductivity of composites (Table S2); major parameters used in the simulation (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18603/suppl_file/am0c18603_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient Multi-Path Heat Dissipation of Aluminum Framework Composites Assisted with High Crystalline Carbon Coatings

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Facile Preparation of Polymer-Based Heat Dissipation Composite Coating with Enhanced Thermal Conductivity Via Optimizing Synergistic Effect of Multi-Scale Fillers

Densifying Conduction Networks of Vertically Aligned Carbon Fiber Arrays with Secondary Graphene Networks for Highly Thermally Conductive Polymer Composites

Improving through-plane thermal conductivity of PDMS-based composites using highly oriented carbon fibers bridged by Al2O3 particles

Improving thermal conductivity of epoxy composite by three-dimensional filler network constructed with two different diameters aluminum nitride and cellulose nanofiber

Thermal Management and Waste Heat Recovery of Electronics Enabled by Highly Thermoconductive Aramid Composites with Bridge-Type 1D/2D Liquid-Crystalline Thermal Conduction Networks

Study of Aluminum Foam Material For Heat Dissipation of Heat Source at Varying Heat Generation

Highly Thermally Conductive and Superior Electrical Insulation Polymer Composites via In Situ Thermal Expansion of Expanded Graphite and In Situ Oxidation of Aluminum Nanoflakes

CT features of peritoneal and mesenteric involvement in pediatric malignancies. Experience from thirteen cases.

Thermal response of the two-directional high-thermal-conductive carbon fiber reinforced aluminum composites with low interface damage by a vacuum hot pressure diffusion method

Phase change composites with ultra-high through-plane thermal conductivity achieved by vertically-aligned graphite film and double-shelled microcapsules

High-Performance Graphene Biocomposite Enabled by Fe3+ Coordination for Thermal Management.

Construction of alumina framework with a sponge template toward highly thermally conductive epoxy composites

Particle packing theory guided multiscale alumina filled epoxy resin with excellent thermal and dielectric performances

A composite coating based on metal–organic framework MIL-101(Cr) synthesised by L-malic acid as mineralising agent for thermal management

Dual Network Structures of Polyurethane/Boron Nitride Nanosheets/Alumina for Improved Thermal Management of Polymers

Epoxy Composites with High Thermal Conductivity by Constructing Three-Dimensional Carbon Fiber/Carbon/Nickel Networks Using an Electroplating Method

Tailored carbon-based aramid nanofiber nanocomposites with highly anisotropic thermal conductivity and superior mechanical properties for thermal management

Epoxy composite with significantly improved thermal conductivity by constructing a vertically aligned three-dimensional network of silicon carbide nanowires/ boron nitride nanosheets

Enhanced thermal conductivity of epoxy composites by constructing aluminum nitride honeycomb reinforcements