Abstract:Coal tar pitch was ground into powder and hydroformed with high pressure. After pre-oxidation, the pitch was activated by CO2 at high temperature. The effects of different preparation conditions on the yield, pore structure and phenol adsorption capacity of activated carbon were investigated, and activated carbon prepared under suitable conditions had good adsorption performance. A pore volume of 1-10 nm is the main absorption structure according to the analysis of pore size distribution and phenol adsorption capacity. The activated carbon showed high mechanical strength through compressive strength tests. Graphite nanocrystals around 5 nm were observed in the TEM images, and it illustrates that grain refinement results in the high strength. These nanocrystal stacked structures are easier to make and enlarge pores by activation than graphite layer stacked structures. Surface functional groups are considered not to be the active sites of phenol adsorption as suggested by the results of FTIR and Boehm's titration, and acidic oxygen-containing functional groups are harmful to phenol adsorption, which happen to be removed in the reductive preparation atmosphere. The donor-acceptor complex mechanism can be ruled out, and the pi-pi interactions are considered the most likely mechanism. The Langmuir and Reach-Peterson models are better fitted to the adsorption isotherms. Adsorption kinetics fit the intraparticle diffusion model best. Comparison of different activated carbons shows that suitable pore size is important for phenol adsorption. Thermodynamic parameters demonstrate that the adsorption process is spontaneous and exothermic, and the entropy increases. Pitch-based high-strength columnar activated carbon is an effective and low cost adsorbent for phenol wastewater treatment. This carbon nanocrystal material also provides a new direction for catalyst carriers.

Kinetics and Equilibrium Study of Phenol Adsorption by Activated Carbon Derived from Pig Blood

Activated Carbon Adsorption for Removal of the Nitrogenous Disinfection Byproduct Phenylacetonitrile from Drinking Water

Removal of phenol by lignin-based activated carbon as an efficient adsorbent for adsorption of phenolic wastewater

Adsorption of phenol from aqueous solution on activated carbons prepared from antibiotic mycelial residues and traditional biomass

Characteristics of activated carbon from sludge and peanut shell and its application for phenol adsorption

Experimental Study on the Preparation of Lignin-Based Activated Carbon and the Adsorption Performance for Phenol

Phenol removal via activated carbon from co-pyrolysis of waste coal tar pitch and vinasse

Kinetics of Phenol Adsorption Onto Activated Carbon Fiber

Adsorption treatment of phenolic wastewater by activated carbon:a review

Kinetics of adsorption of 2,4-dichlorophenol by nitrogen doping activated carbon

Adsorption of P-Nitrophenol from Aqueous Solutions Onto Activated Carbon Fiber

Absorption of Phenol on Nitrogen-Enriched Activated Carbon from Wood Fiberboard Waste with Chemical Activation by Potassium Carbonate

Kinetics and equilibrium adsorption study of p-nitrophenol onto activated carbon derived from walnut peel

A study on the preparation of pitch-based high-strength columnar activated carbon and mechanism of phenol adsorption from aqueous solution

Enhanced adsorption of phenol from aqueous solution by carbonized trace ZIF-8-decorated activated carbon pellets

Kinetics and isotherm modeling of phenol adsorption by immobilizable activated carbon

Enhanced adsorption of phenol from aqueous solution by KOH combined Fe-Zn bimetallic oxide co-pyrolysis biochar: Fabrication, performance, and mechanism

Adsorption of phenol on CO2-treated activated carbon

Adsorptive removal of phenol using banyan root activated carbon

Adsorption of p-nitrophenol from wastewater by activated carbon fiber and its desorption

Adsorption Kinetics of Activated Bamboo Charcoal for Phenol