Absorption of Phenol on Nitrogen-Enriched Activated Carbon from Wood Fiberboard Waste with Chemical Activation by Potassium Carbonate

XiaoJuan Jin Yue Mei Zhu

DOI: https://doi.org/10.4172/2157-7048.1000199

2014-01-01

Abstract:Preparation of nitrogen-enriched activated carbons from wood fiberboard waste was studied.

English Else

What problem does this paper attempt to address?

Experimental Study on the Preparation of Lignin-Based Activated Carbon and the Adsorption Performance for Phenol

Ping Cao,Yuting Li,Jingli Shao

DOI: https://doi.org/10.1021/acsomega.4c00352

IF: 4.1

2024-06-18

ACS Omega

Abstract:Biomass waste and wastewater are important wastes in the process of industrialization, which need to be effectively treated and utilized. In this work, an innovative method of collaborative treatment of biomass waste and phenol-containing wastewater is proposed. Biomass waste was used to produce activated carbon (AC), and then AC was used for phenol removal in wastewater treatment. Two kinds of typical biomass waste material, namely, coconut shell and lignin, were used. Physical activation...

chemistry, multidisciplinary
Preparation of Nitrogen-containing Activated Carbon from Waste Medium Density Fiberboard for Electric Double Layer Capacitor

Xiaoxu Cai,Ruquan Ren,Mingyang Zhang,Xiaojuan Jin,Qiang Zhao

DOI: https://doi.org/10.15376/biores.10.3.5586-5595

2015-07-21

BioResources

Abstract:The waste of medium density fiberboards was carbonized at a temperature of 500 °C. The activated carbons were obtained after 16 h of impregnation and 1 h of activation by KOH at 800 °C with KOH/coke mass ratios of 2.5, 3.0, 3.5, and 4.0. The activated carbons were investigated for determination of porosity and elemental analysis. The results showed that the surface area of the activated carbons varied from 1456 to 1647 m2/g and the total pore volume ranged from 0.701 to 1.106 cm3/g, which was affected by different KOH/coke mass ratios. The pore size distribution indicated that waste medium density fiberboard activated carbons included both micropores and mesopores, and the elemental analysis implied that the contents of nitrogen varied from 0.97% to 2.60%. Electric double layer capacitors were made using the activated carbons and their electrochemical properties were studied. The specific capacitances of the activated carbon electrodes ranged from 212 to 223 F/g. The results suggest that activated carbon from waste medium density fiberboard can be a candidate material for electric double layer capacitor electrodes because of its good electrochemical capacities.

materials science, paper & wood
Preparation of Expanded Graphite-based Carbon/Carbon Composites and Its Adsorption Properties on Phenol

WANG Zhen-bang,CHEN Zhi-gang,LIU Cheng-bao,DUAN Xiao-tao,CHEN Hong,FU Meng

DOI: https://doi.org/10.3969/j.issn.1001-4381.2010.11.006

2010-01-01

Journal of Materials Engineering

Abstract:Expanded graphite-based carbon/carbon composites(EGCs) were prepared by impregnation of expanded graphite(EG) in H3PO4/sucrose solution.The textural,structural characteristics of the composites were investigated by scanning electron microscopy(SEM) and nitrogen adsorption method.The results indicated that the worm-like particles were partly covered by pyrolytic carbons while the large open spaces among entangled worm-like particles were scarcely any,most of the activation carbon(ACs) covered the surface of interior pores of EGCs in the form of thin carbon layer with the thickness of 87nm.In the best condition of Xp=0.9,350℃ and 120min,the obtained sample had the highest surface area of 1948 m2/g.The phenol removal capabilities of EGCs were 24.8% higher than that of activated carbons which were prepared in the same condition.
A study on the preparation of pitch-based high-strength columnar activated carbon and mechanism of phenol adsorption from aqueous solution

Peng Yao,Jianmeng Cen,Mengxiang Fang,Tao Wang,Qinhui Wang

DOI: https://doi.org/10.1039/c7ra13344h

IF: 4.036

2018-01-01

RSC Advances

Abstract:Coal tar pitch was ground into powder and hydroformed with high pressure. After pre-oxidation, the pitch was activated by CO2 at high temperature. The effects of different preparation conditions on the yield, pore structure and phenol adsorption capacity of activated carbon were investigated, and activated carbon prepared under suitable conditions had good adsorption performance. A pore volume of 1-10 nm is the main absorption structure according to the analysis of pore size distribution and phenol adsorption capacity. The activated carbon showed high mechanical strength through compressive strength tests. Graphite nanocrystals around 5 nm were observed in the TEM images, and it illustrates that grain refinement results in the high strength. These nanocrystal stacked structures are easier to make and enlarge pores by activation than graphite layer stacked structures. Surface functional groups are considered not to be the active sites of phenol adsorption as suggested by the results of FTIR and Boehm's titration, and acidic oxygen-containing functional groups are harmful to phenol adsorption, which happen to be removed in the reductive preparation atmosphere. The donor-acceptor complex mechanism can be ruled out, and the pi-pi interactions are considered the most likely mechanism. The Langmuir and Reach-Peterson models are better fitted to the adsorption isotherms. Adsorption kinetics fit the intraparticle diffusion model best. Comparison of different activated carbons shows that suitable pore size is important for phenol adsorption. Thermodynamic parameters demonstrate that the adsorption process is spontaneous and exothermic, and the entropy increases. Pitch-based high-strength columnar activated carbon is an effective and low cost adsorbent for phenol wastewater treatment. This carbon nanocrystal material also provides a new direction for catalyst carriers.
Waste Phenolic Resin Derived Activated Carbon By Microwave-Assisted Koh Activation And Application To Dye Wastewater Treatment

Wenhai Hu,Song Cheng,Hongying Xia,Libo Zhang,Xin Jiang,Qi Zhang,Quan Chen

DOI: https://doi.org/10.1515/gps-2019-0008

2019-01-01

Green Processing and Synthesis

Abstract:The waste phenolic resin was utilized as the raw material to prepare activated carbon (AC) used KOH as the activating agent via microwave heating. The phenolic resin was carbonized at 500 degrees C and then performed with a KOH/Char ratio of 4 and microwave power of 700 W for a duration of 15 min. The physic-chemical characteristics of the AC were characterized by N-2 adsorption instrument, FTIR, SEM and TEM. The BET surface area and pore volume of AC were found to be 4269 m(2)/g and 2.396 ml/g, respectively. The activation process to generate such a phenomenally high surface area of the AC has little reported in open literatures and could pave way for preparation adsorbents that are far superior to the currently marketed adsorbents. The methylene blue (MB) was used as the model to assess its suitability to dye wastewater treatment. Towards this, the MB adsorption isotherms were conduct at three different temperatures and tested with different adsorption isotherm models. The adsorption isotherms could be modeled using Langmuir isotherm. While kinetics could be used the pseudo-second order kinetics to describe. Thermodynamic results demonstrated that the adsorption process was a spontaneous, as well as endothermic.
Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

ZH Huang,F Kang,JB Yang,KM Liang,AP Huang

DOI: https://doi.org/10.1080/10587250215268

IF: 0.7

2002-01-01

Molecular Crystals and Liquid Crystals

Abstract:Viscose rayon fabric impregnated with (NH4)(2)HPO4 were carbonized in 200 cm(3) /min N-2 at 5degreesC/min with a residence time of 1 h at 850degreesC and then activated with 200 cm 3 /min CO2 at 850degreesC for different burnoffs. The pore structure of all samples was characterized by N-2 adsorption at 77 K. Adsorption of methy-ethyl-ketone (MEK) and benzene vapor on the adsorbents was measured by gravimetric method. The results show that viscose rayon-based activated carbon fiber (ACF) exhibited narrower microporosity and higher micropore volume as compared with that activated by steam. ACFs prepared in this way have higher adsorption capacity for low concentration VOCs.
Adsorption of Phenol from Aqueous Solution by A Hierarchical Micro-Nano Porous Carbon Material

Chengbao Liu,Zhigang Chen,Chaoying Ni,Feng Chen,Cheng Gu,Yu Cao,Zhengying Wu,Ping Li

DOI: https://doi.org/10.1007/s12598-012-0562-z

2012-01-01

Abstract:A hierarchical micro-nano porous carbon material (MNC) was prepared using expanded graphite (EG), sucrose, and phosphoric acid as raw materials, followed by sucrose-phosphoric acid solution impregnation, solidification, carbonization and activation. Nitrogen adsorption and mercury porosimetry show that mixed nanopores and micropores coexist in MNC with a high specific surface area of 1978 m2·g−1 and a total pore volume of 0.99 cm3·g−1. In addition, the MNC is found to consist of EG and activated carbon with the latter deposited on the interior and the exterior surfaces of the EG pores. The thickness of the activated carbon layer is calculated to be about one hundred nanometers and is further confirmed by scanning electron microscope (SEM) and transmission election microscope (TEM). A maximum static phenol adsorption of 241.2 mg·g−1 was obtained by using MNC, slightly higher than that of 220.4 mg·g−1 by using commercial activated carbon (CAC). The phenol adsorption kinetics were investigated and the data fitted well to a pseudo-second-order model. Also, an intra-particle diffusion mechanism was proposed. Furthermore, it is found that the dynamic adsorption capacity of MNC is nearly three times that of CAC. The results suggest that the MNC is a more efficient adsorbent than CAC for the removal of phenol from aqueous solution.
Adsorption of phenol on CO2-treated activated carbon

Ruidong ZHAO,Fengling LIU,Shourong ZHENG,Haiqin WAN,Zhaoyi XU

DOI: https://doi.org/10.3969/j.issn.1001-3865.2010.10.008

2010-01-01

Abstract:CO2-treated activated carbon from domestic coconut was prepared by calcination in high temperature at CO2 atmosphere,the adsorption capacity of raw activated carbon and CO2-treated activated carbon for phenol was investigated and compared.The results showed that the surface characteristics of activated carbon were significantly improved after CO2 activation,with the BET surface area increased from 627.22 m2/g to 822.71 m2/g,micropore volume and mesopore volume increased by 28.6% and 38.9% respectively.The Freundlich model can be used to describe the process of phenol adsorption on activated carbon and the adsorption data were well fitted by pseudo second order equation.The adsorption capacities,which increased with decreasing temperature,were perfect when the solution pH was 2-8,when pH>9 the adsorption efficiency decreased gradually for the dissociated phenol was not conductive to adsorption process.
Green Conversion of Bamboo Chips into High-Performance Phenol Adsorbent and Supercapacitor Electrodes by Simultaneous Activation and Nitrogen Doping

Yunchao Li,Zhenhao Li,Bo Xing,Hanming Li,Zhongqing Ma,Wenbiao Zhang,Prasert Reubroycharoen,Shurong Wang

DOI: https://doi.org/10.1016/j.jaap.2021.105072

IF: 6

2021-01-01

Journal of Analytical and Applied Pyrolysis

Abstract:Nitrogen doping is one of the most promising approaches for improving the properties of carbon materials. Here, we reported a simple and effective method for the preparation of nanoporous nitrogen-doped carbonaceous material for liquid phase adsorbents and supercapacitor electrodes. In this method, the target carbonaceous material (biochar) was produced by one-step pyrolysis and activation of bamboo chips under the ammonia atmosphere. Two green activation reagents (K2C2O4 and KHCO3) were introduced into the preparation process simultaneously. The physicochemical properties of biochar were studied by means of SEM, BET, XRD, XPS and so on. The characterization results confirmed that the vascular bundle structure of bamboo can be well preserved by pyrolysis under ammonia atmosphere combined with green activation, and the nitrogen atoms were successfully introduced into the biochar?s skeleton uniformly. The physicochemical properties of biochar can be adjusted suitable for high phenol adsorption and supercapacitor electrodes at different temperatures. Optimum nitrogendoped biochar showed a high phenol adsorption capacity of 169.5 mg/g at 25 ? and exhibited exceptional specific capacitance of 208 F/g at the current density of 1 A/g due to its unique nanoporous structures and surface functional groups. This novel nanoporous nitrogen-doped bamboo chips have great application potential in pollutant removal and energy storage.
Phenol removal via activated carbon from co-pyrolysis of waste coal tar pitch and vinasse

Ming Gao,Xiaona Wang,Changlei Xia,Na Song,Yuhui Ma,Qunhui Wang,Tianxue Yang,Shengbo Ge,Chuanfu Wu,Su Shiung Lam

DOI: https://doi.org/10.1007/s11814-020-0676-1

IF: 2.7

2021-01-01

Korean Journal of Chemical Engineering

Abstract:The behavior and characteristics of phenol adsorption by activated carbon produced from co-pyrolysis of coal tar pitch and vinasse were investigated. Coal tar pitch and vinasse (mass ratio of 1:3) were firstly co-pyrolyzed and carbonated at 400 °C for 2 h. The carbonized material produced was then soaked with saturated KOH solution and activated at 800 °C for 1 h to form activated carbon. Results from the phenol wastewater adsorption experiments suggest that pseudo-second-order kinetics and the Weber-Morris model could reflect the time-dependent adsorption behavior of phenol wastewater by the activated carbon, revealing that internal diffusion represents the rate-limiting procedure and dominant process to control the adsorption rate in the early stage of the adsorption. Monolayer adsorption played the key role during the phenol adsorption. The adsorption was an endothermic reaction in temperature ranging from 15 °C to 35 °C, indicating that the adsorption speed could be stimulated by the increasing temperature. This study establishes a theoretical foundation for the usage and the potential application of the activated carbon derived from coal tar pitch and vinasse in wastewater treatment.

engineering, chemical,chemistry, multidisciplinary
Nitrogen-Doped Hierarchical Porous Biochar Derived from Corn Stalks for Phenol-Enhanced Adsorption

Yunchao Li,Bo Xing,Xiaoliu Wang,Kaige Wang,Lingjun Zhu,Shurong Wang

DOI: https://doi.org/10.1021/acs.energyfuels.9b02924

IF: 4.6541

2019-01-01

Energy & Fuels

Abstract:Nitrogen-doped hierarchical porous biochar has aroused great interest in energy storage and adsorption applications. In this study, nitrogen-doped hierarchical porous biochar was prepared from corn stalks by in situ pyrolysis with urea as the nitrogen source and NaHCO3 as the green activation agent. The liquid adsorption behavior of biochar was evaluated using phenol as a pollutant probe. The results showed that urea had a synergistic effect on the pore structure development of biochar in the presence of an activation agent. The addition of urea especially promoted the formation of micropores. X-ray photoelectron spectroscopy results showed that nitrogen atoms were successfully introduced into the skeleton of biochar in the form of different nitrogen species, which promote the adsorption of phenol. The phenol adsorption was dominated by micropore filling, and the adsorption capacity was positively correlated with the content of graphitic N. The nitrogen-doped biochar obtained at 700 degrees C with a moderate surface area and a high content of graphite type N exhibited the highest adsorption capacity of phenol. The kinetic analysis also indicates the existence of chemical interactions in the adsorption process.
Adsorption treatment of phenolic wastewater by activated carbon:a review

Mengxiang FANG,Peng YAO,Jianmeng CEN,Chunjiang YU,Qinhui WANG,Zhongyang LUO

DOI: https://doi.org/10.16085/j.issn.1000-6613.2017-1015

2018-01-01

Abstract:Phenolic wastewater is a common chemical wastewater which has a great harm to the environment and biological.As a good adsorbent,activated carbon is widely used in sewage treatment,especially in adsorption treatment of phenolic wastewater.The latest researches focus on the development and utilization of various carbonaceous materials,and explore the methods of preparation and modification to improve the phenolic adsorption properties of activated carbon.Some mechanism studies pay attention to the pore structure and surface functional groups of activated carbon,as well as the effect on the properties of phenolic adsorption.In this paper,the preparation and modification of activated carbon were introduced,the characteristics and mechanism of phenolic adsorption by activated carbon were summarized,the main influencing factors of the adsorption process were analyzed,the research directions and prospects were deduced.The analysis shows that raw materials with high carbon content are suitable for the preparation of activated carbon,especially carbonaceous waste.The adsorption capacity of phenol in activated carbon is affected by the specific surface area and surface functional groups,which is significant for the preparation and modification of activated carbon.It is important to control the particle size,pH,temperature,adsorption time,competitive adsorption and other factors when activated carbon is used to phenol adsorption in the specific application.
Characteristics of activated carbon from sludge and peanut shell and its application for phenol adsorption

Yadi Zhang,Panyue Zhang,Jianfeng Peng,Yonghui Song,Guangming Zeng,Ruixia Liu,Haibo Li

DOI: https://doi.org/10.5004/dwt.2018.22210

IF: 1.1

2018-01-01

Desalination and Water Treatment

Abstract:In this study, activated carbon (AC) was prepared from municipal sludge with peanut shell as the carbon additive and the ferric chloride as activator. Then the properties of AC activated by ferric chloride (FAC) and non-activated (NAC) were analyzed. Main results show that FAC has extremely higher BET surface area (781.5 m(2)/g) and pore volume (0.859 m(3)/g) than NAC, which implies that ferric chloride can effectively promote the formation of developed pore structures of AC. Moreover, the obtained ACs were used as adsorbent to remove phenol in aqueous solution. Results indicate that FAC and NAC have a higher adsorption capacity in the range pH of 7-9 and 1 g/L is the most suitable dosage of AC, considering of the removal rate and adsorption capacity. The adsorption kinetic data and adsorption isotherm data are well described by the pseudo-second order model and Freundlich isotherm model. The maximum equilibrium adsorption capacity is 109.58 mg/g (1 g/L, pH 8.0, 298K). In summary, it is an effective method to prepare AC from sludge and a small amount of peanut shell by using ferric chloride as activator and to remove phenol. This provides a potential option for sludge resource recovery.
Mechanism of Biomass Activation and Ammonia Modification for Nitrogen-Doped Porous Carbon Materials.

Kaixu Li,Wei Chen,Haiping Yang,Yingquan Chen,Sunwen Xia,Mingwei Xia,Xin Tu,Hanping Chen

DOI: https://doi.org/10.1016/j.biortech.2019.02.039

IF: 11.4

2019-01-01

Bioresource Technology

Abstract:The effect of chemical activation and NH3 modification on activated carbons (ACs) was explored via two contrasting bamboo pyrolysis strategies involving either two steps (activation followed by nitrogen doping in NH3 atmosphere) or one step (activation in NH3 atmosphere) with several chemical activating reagents (KOH, K2CO3, and KOH + K2CO3). The ACs produced by the two-step method showed relatively smaller specific surface areas (similar to 90% micropores) and lower nitrogen contents. From the one-step method, the ACs had larger pore diameters with about 90% small mesopores (2-3.5 nm). Due to a promotion effect with the KOH + K(2)CO(3 )combination, the AC attained the greatest surface area (2417 m(2) g(-1)) and highest nitrogen content (3.89 wt%), endowing the highest capacitance (175 F g(-1)). The balance between surface area and nitrogen content recommends KOH + K(2)CO(3 )activation via the one-step method as the best choice for achieving both greener production process and better pore structure.
THE STUDY OF PHENOLIC RESIN-BASED MESOPORE ACTIVATED CARBON WITH SUPERHIGH SPECIFIC SURFACE AREA

Wang Jin-fu,Gu Jin-ling,Han Xi-jiang,Wang Yan-xin

DOI: https://doi.org/10.3969/j.issn.1001-8948.2008.03.003

IF: 10.9

2008-01-01

Carbon

Abstract:Phenolic resin-based activated carbon were prepared from Phenolic resin with potassium hydroxide as activating agent.The effect of carbonization temperature,the ratio of KOH to carbon,activation temperature and activation time on adsorption propertied of activated carbon were systematically studied by orthogonal expriments,and the optimum condition of the preparation of activated carbon with superhigh specific surface area was confirmed.The behavior of carbonization activation was discussed on the TG-DTA analyses.Specific surface area and the porous strucres of activated carbon was analysed.by N2-BET,and The mechanism of pore formation was explained simply.The results show that when carbonization temperature at 400℃,5∶1 of ratio of KOH to carbon,activation temperature at 750℃,activation time for 100min,phenolic resin-based activatied carbon with 3 013m2·g(-1) of specific surface area,1.609cm3·g(1) of pore volume,2.135nm of average pore size and 592mg·g(-1) of methylene blue adsorption value could be prepared.
Removal of phenol by lignin-based activated carbon as an efficient adsorbent for adsorption of phenolic wastewater

Mengping Li,Jincheng Mu,Yanxiu Liu,Huan Wang,Yuanyuan Wang,Hua Song

DOI: https://doi.org/10.1007/s11164-023-04958-z

IF: 3.134

2023-02-08

Research on Chemical Intermediates

Abstract:The different lignin-based biomass activated carbons were prepared by KOH activation from three different lignin sources [corn straw lignin (CSLAC), lignosulfonate lignin (LSAC) and bagasse lignin (BLAC)]. And the effects of different lignin sources, activation temperatures and adsorption conditions (adsorbent dosage, adsorption temperature and pH value) on the removal of phenol were systematically investigated. The results showed that different lignin-based biomass activated carbons, the CSLAC-based activated carbon exhibited the highest specific surface area and phenol adsorption capacity. And the CSLAC- T prepared at 800 °C (CSLAC-800) possessed specific surface area of 1679 m 2 /g, and the adsorption capacity of phenol reached 612 mg/g. The phenol removal rate of CSLAC- T was positively correlated with the specific surface area, and the adsorption rate of CSLAC- T was significantly higher than that before modification. In addition, the kinetic model, isothermal adsorption model and thermodynamic parameters of the three adsorbents were discussed. The results show that the three lignin-based activated carbons had a large adsorption capacity for phenol, which was spontaneous and exothermic adsorption. The adsorption is mainly through the π – π and hydrogen bond interactions, and hydrophobic effect.

chemistry, multidisciplinary
Adsorption and Desorption of Phenol on Activated Carbon Fibers in A Fixed Bed

P Li,GH Xiu,L Jiang

DOI: https://doi.org/10.1081/ss-100105910

IF: 2.799

2001-01-01

Separation Science and Technology

Abstract:The application of activated carbon fibers (ACFs) to remove phenol from water is studied. The adsorption capacity of ACFs is favorable and the adsorption isothermal data can be represented by Langmuir-type equation for phenol concentrations changed from 0 to 0.8 kg/m(3). The regeneration of ACF adsorbent saturated with phenol in a fixed bed can be achieved by using ethanol or sodium hydroxide solution, respectively, many times with 90% efficiency of regeneration. A mathematical model is applied to evaluate the effects of intraparticle and external mass transfer resistances as well as the axial dispersion on the breakthrough curves. The axial dispersion is confirmed to be the main parameter that controls the adsorption kinetics.
Kinetic and Mechanistic Analysis of Phenol Adsorption on Activated Carbons from Kenaf

Delia Omenat-Morán,Carlos J. Durán-Valle,Manuel A. Martínez-Cañas

DOI: https://doi.org/10.3390/molecules29204941

IF: 4.6

2024-10-19

Molecules

Abstract:Activated carbons were prepared from kenaf (Hibiscus cannabinus L.). Carbonization was carried out at 600 °C for 2 h, and activation was performed using air at 600 °C and using CO2 at 750 °C. The activated carbons obtained were treated with HNO3 and H2SO4. The samples were characterized by their chemical and physical structure. The activated carbons obtained were mainly macroporous, and their structure underwent major changes with the activation method and acid treatment. Activated carbons were alkaline and acid-treated carbons were neutral. They were used for phenol adsorption and a kinetic and mechanistic study of adsorption was carried out. The fit to the pseudo-second order and Elovich models was predominant. The rate-limiting step of the process was determined to be diffusion within the pores, as the experimental data fit the Bangham model. DFT simulation showed that the preferred adsorption position involves ππ stacking and that oxidation enhances this interaction. Furthermore, the simulation showed that the interaction of phenol with oxygenated functional groups depends on the type of functional group.

chemistry, multidisciplinary,biochemistry & molecular biology
A High-Performance Biochar Produced from Bamboo Pyrolysis with In-Situ Nitrogen Doping and Activation for Adsorption of Phenol and Methylene Blue

Zhenhao Li,Bo Xing,Yan Ding,Yunchao Li,Shurong Wang

DOI: https://doi.org/10.1016/j.cjche.2020.03.031

IF: 3.8

2020-01-01

Chinese Journal of Chemical Engineering

Abstract:Nitrogen doping is a promising method for the preparation of functional carbon materials. In this study, a nitrogen-doped porous coral biochar was prepared by using bamboo as raw material, urea as nitrogen source, and KHCO3 as green activator through in-situ pyrolysis. The structure of the obtained biochar was characterized by various techniques including nitrogen adsorption and desorption, Raman spectroscopy, X-ray photoelectron spectrometer, and etc. The adsorption properties of nitrogen-doped biochar were evaluated with phenol and methylene blue probes. The results showed that the nitrogen source ratio had a significant effect on the evolution of pore structure of biochar. Low urea addition ratio was beneficial to the development of pore structures. The optimum specific surface area of nitrogen-doped biochar could be up to 1693 m(2). g(-1). Nitrogen doping can effectively improve the adsorption capacity of biochar to phenol and methylene blue. Biochar prepared at 973.15 K with low urea addition ratio exhibited the highest adsorption capacity for phenol and methylene blue, and the equilibrium adsorption capadty was 169.0 mg. g(-1) and 499.3 mg .g(-1) , respectively. By comparing the adsorption capacity of various adsorbents in related fields, it is proved that the nitrogen-doped biochar prepared in this study has a good adsorption effect. (C) 2020 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd. All rights reserved.
Novel nitrogen-enriched activated carbon with tunable microporosity from Agricultural and Plastic Waste for CO 2 adsorption

Yuliang Li,Guojie Zhang,Chenlei Wu,Jun Liu,Guoqaing Li,Ying Wang,Yuqiong Zhao

DOI: https://doi.org/10.1016/j.jece.2023.111257

IF: 7.7

2023-10-15

Journal of Environmental Chemical Engineering

Abstract:Low-cost nitrogen-enriched activated carbons (PNACs) with high microporosity were prepared by a simple one-step activation doping process using KOH as a chemical activator and melamine formaldehyde (MF) as a nitrogen source. These PNACs have shown great potential as effective CO 2 adsorbents. The resulting PNACs were mainly microporous structure, with surface areas ranging from 736 to 2144 m 2 /g and total pore volumes ranging from 0.565 to 1.366 cm 3 /g. The CO 2 adsorption capacities of PNACs were in the range of 2.353 to 6.068 mmol/g and 1.59 to 4.131 mmol/g at 0 °C and 25 °C under 1 bar, respectively. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The experimental isotherm data were analyzed using various equations and the Toth isotherm equation was found to be the most accurate mathematical model to describe the CO 2 adsorption isotherm of the activated carbon. This result further confirms that PNACs have a non-homogeneous pore structure. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The exceptional CO 2 adsorption properties can be attributed to the high microporosity and nitrogen content of the PNACs. The relationship between the physicochemical properties and CO 2 adsorption performance of the activated carbon was further investigated by relevance analysis. At 0 °C and 1 bar, it was observed that the pore structure played a predominant role in the CO 2 adsorption process of PNACs. During this condition, PNACs mainly exhibited physical adsorption, which was primarily governed by the microporous filling mechanism. However, at 25 °C and 1 bar, both microporosity and nitrogen content contribute equally to the CO 2 adsorption effect. This observation confirms that the pore structure and nitrogen functional groups work synergistically to influence the CO 2 adsorption performance of PNACs. The adsorption mechanism of PNACs can be described as physical adsorption, driven by the cooperation between nitrogen functional groups and the filling of micropores. This innovative one-step activation doping process successfully converts agricultural and plastic waste into sustainable and high-performance CO 2 adsorbents. It provides new insights for mitigating the greenhouse effect and addressing the issue of plastic pollution.

engineering, chemical, environmental

Absorption of Phenol on Nitrogen-Enriched Activated Carbon from Wood Fiberboard Waste with Chemical Activation by Potassium Carbonate

Experimental Study on the Preparation of Lignin-Based Activated Carbon and the Adsorption Performance for Phenol

Preparation of Nitrogen-containing Activated Carbon from Waste Medium Density Fiberboard for Electric Double Layer Capacitor

Preparation of Expanded Graphite-based Carbon/Carbon Composites and Its Adsorption Properties on Phenol

A study on the preparation of pitch-based high-strength columnar activated carbon and mechanism of phenol adsorption from aqueous solution

Waste Phenolic Resin Derived Activated Carbon By Microwave-Assisted Koh Activation And Application To Dye Wastewater Treatment

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Adsorption of Phenol from Aqueous Solution by A Hierarchical Micro-Nano Porous Carbon Material

Adsorption of phenol on CO2-treated activated carbon

Green Conversion of Bamboo Chips into High-Performance Phenol Adsorbent and Supercapacitor Electrodes by Simultaneous Activation and Nitrogen Doping

Phenol removal via activated carbon from co-pyrolysis of waste coal tar pitch and vinasse

Nitrogen-Doped Hierarchical Porous Biochar Derived from Corn Stalks for Phenol-Enhanced Adsorption

Adsorption treatment of phenolic wastewater by activated carbon:a review

Characteristics of activated carbon from sludge and peanut shell and its application for phenol adsorption

Mechanism of Biomass Activation and Ammonia Modification for Nitrogen-Doped Porous Carbon Materials.

THE STUDY OF PHENOLIC RESIN-BASED MESOPORE ACTIVATED CARBON WITH SUPERHIGH SPECIFIC SURFACE AREA

Removal of phenol by lignin-based activated carbon as an efficient adsorbent for adsorption of phenolic wastewater

Adsorption and Desorption of Phenol on Activated Carbon Fibers in A Fixed Bed

Kinetic and Mechanistic Analysis of Phenol Adsorption on Activated Carbons from Kenaf

A High-Performance Biochar Produced from Bamboo Pyrolysis with In-Situ Nitrogen Doping and Activation for Adsorption of Phenol and Methylene Blue

Novel nitrogen-enriched activated carbon with tunable microporosity from Agricultural and Plastic Waste for CO 2 adsorption