Catalytic Hydrothermal Deoxygenation of Lipids and Fatty Acids to Diesel-Like Hydrocarbons: a Review

Xiaoyi Yao,Timothy J. Strathmann,Yalin Li,Lauren E. Cronmiller,Huiling Ma,Jing Zhang

DOI: https://doi.org/10.1039/d0gc03707a

IF: 9.8

2021-01-01

Green Chemistry

Abstract:This review summarizes the reactions, catalysts and influence factors in the hydrothermal deoxygenation of lipids and fatty acids to diesel-like hydrocarbons.

What problem does this paper attempt to address?

Dilemma and Strategies for Production of Diesel-Like Hydrocarbons by Deoxygenation of Biomass-Derived Fatty Acids

Hongju Lin,Xiyan Chen,Yanchang Chu,Jie Fu,Le Yang

DOI: https://doi.org/10.1016/j.gee.2024.08.005

IF: 12.781

2024-01-01

Green Energy & Environment

Abstract:The valorization of biomass to produce biofuels has become a heavily investigated field due to the depletion of fossil fuels and environmental concerns. Among them, the research on deoxygenation of fatty acids or esters derived from biomass as well as municipal sludge organics to produce diesel-like hydrocarbons has become a hot topic. Fatty acid is a key intermediate derived from ester hydrolysis, therefore has attracted more attention as a model compound. In this review, we first introduce and compare the three reaction pathways of hydrodeoxygenation, decarboxylation and decarbonylation, for the deoxygenation of fatty acids and esters. The preference of reaction pathway is closely related to the type of raw materials and catalysts as well as reaction conditions. The special purpose of this review is to summarize the dilemma and possible strategies for deoxygenation of fatty acids, which is expected to provide guidance for future exploration and concentrates. The atom utilization along with stability during reaction in a long time is the most important index for commercial economy. Herein, we propose that the rational design and delicate synthesis of stable single-atom non-noble catalysts may be the best solution. The ultimately goal is aiming to develop sustainable production of green diesel hydrocarbons.
Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Riyang Shu,Biqin Lin,Chao Wang,Jingtao Zhang,Zhengdong Cheng,Ying Chen

DOI: https://doi.org/10.1016/j.fuel.2018.11.107

IF: 7.4

2018-01-01

Fuel

Abstract:Noble metal catalyst has an outstanding catalytic activity on the hydrodeoxygenation (HDO) process, but its high cost limits large-scale application. Herein, we put forward a novel photochemical method to prepare the highly dispersed Pt/TiO2 catalyst with a low metal loading. And it presented an efficient performance on the HDO of phenolic compounds and real bio-oil. Guaiacol could be converted into cyclohexane with 95.1% selectivity at 280 degrees C under 1 MPa H-2 atmosphere. Characterization results revealed that the high Pt dispersion was the critical factor for the high catalytic activity. And the photochemical method preferred to achieve high metal dispersion due to the room temperature condition. Other typical phenolic monomers and dimers were able to transform into hydrocarbons with most yield above 80%, wherein not only the deoxygenation step, but also the cleavage of ether bonds can be realized in one pot. This catalytic system was also effective on the upgrade of bio-oil derived from the pyrolysis of cotton straw. Hydrocarbon content increased to 33.80% from 11.33%. Alkylphenols content increased to 51.38% from 27.86%. These two products can be used as value-added fuels and chemicals, respectively. Guaiacols and syringols were completely converted into alkylphenols and hydrocarbon. The amount of other oxygenated compounds also decreased significantly. This simple and active catalytic system is potential to apply widely for the upgrade of raw bio-oil.
Catalytic hydrothermal deoxygenation of palmitic acid (vol 3, pg 311, 2010)

Jie Fu,Xiuyang Lu,Phillip E. Savage

DOI: https://doi.org/10.1039/b923198f

IF: 32.5

2010-01-01

Energy & Environmental Science

Abstract:We herein report a new approach to convert fatty acids to hydrocarbons in near- or supercritical water. We tested several different metal salts, bases, and high-surface-area supported metal catalysts for activity toward deoxygenation of palmitic acid in a hydrothermal reaction medium. Two heterogeneous catalysts, 5% platinum on activated carbon (Pt/C) and 5% palladium on activated carbon (Pd/C), proved to be very effective for hydrothermal deoxygenation of palmitic acid. The reactions were done in water with no added H-2. The catalysts can be reused without significant activity loss, and the selectivity was more than 90% toward pentadecane, the deoxygenation product. We examined the effect of the catalyst loading, reactant loading, batch holding time, and reaction temperature on the Pt/C-catalyzed deoxygenation rate. The results show that the reaction is first-order in palmitic acid, and the rate constants displayed Arrhenius behavior with an activation energy of 79 kJ mol(-1).
Deoxygenation of fatty acid to produce diesel-like hydrocarbons: A review of process conditions, reaction kinetics and mechanism

Lilis Hermida,Ahmad Zuhairi Abdullah,Abdul Rahman Mohamed

DOI: https://doi.org/10.1016/j.rser.2014.10.099

IF: 16.799

2015-02-01

Renewable and Sustainable Energy Reviews

Abstract:Deoxygenation process of fatty acid as a renewable resource to produce diesel-like hydrocarbons is one of the alternatives to address drastic shortage of crude oil-based fuels in the near future. Catalytic deoxygenation process of fatty acid is getting attention from both academia and industry. Researchers have tried different techniques in the fatty acid deoxygenation to enhance the production of diesel-like hydrocarbons. This review paper elucidates the influence of tmain operating conditions towards achieving optimum yield and selectivity of desired products. The reaction pathways, the reaction kinetics as well as recent progress in deoxygenation of fatty acid for production of diesel-like hydrocarbons are also reviewed.

energy & fuels,green & sustainable science & technology
Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Bing Wang,Pei-Gao Duan,Yu-Ping Xu,Feng Wang,Xian-Lei Shi,Jie Fu,Xiu-Yang Lu

DOI: https://doi.org/10.1016/j.energy.2016.03.084

IF: 9

2016-01-01

Energy

Abstract:Co-hydrotreating of microalgae (M) and UEO (used engine oil) was examined for the direct production of gasoline and diesel fuels or blending components. The addition of the noble metal catalysts promoted the cracking and in situ hydrogenation of liquid products (oils) and was beneficial for the production of liquid products. Usihg Pt/C as the catalyst, the effects of temperature (350-450 degrees C), time (2-6 h), UEO/M mass ratio (6/0-0/6), catalyst loading (1-60 wt.%), and initial H-2 pressure (0.1-8 MPa) on the yield and quality of the liquid products were studied. A synergistic effect existed during the co-hydrotreating of the UEO and microalgae, which not only favored the production of liquid products but also promoted in situ denitrogenation and deoxygenation. Co-hydrotreating produced an upgraded oil with fuel properties (e.g., density, calorific value) comparable to traditional liquid transportation fuels derived from fossil fuel. The S content (45 ppm) of the upgraded oil produced at 450 degrees C is even below the minimum requirement of China IV diesel (50 ppm). Examination of the composition of the upgraded oils showed the formation of dominant light aliphatic and aromatic hydrocarbons that could also be used as a chemical feedstock. (C) 2016 Elsevier Ltd. All rights reserved.
Recent advances on catalytic deoxygenation upgrading of liquefaction microalgae bio oil

Ranran Ding,Yulong Wu,Yu Chen,Yanan Duan,Mingde Yang

DOI: https://doi.org/10.3969/j.issn.0438-1157.2014.07.028

2014-01-01

Abstract:Fuel production from renewable and carbon-neutral biomass has attracted much attention due to concerns for the depletion of petroleum reserves and global warming by greenhouse gases. Microalgae offer several advantages over conventional biomass as they have faster growth rate, do not require agricultural land for growth, and consume less water than terrestrial biomass. However, crude bio-oil from noncatalytic liquefaction of microalgae has a high content of oxygen, limiting its direct applications for transportation fuel. The high oxygen content suffers from some drawbacks such as lower energy density, poor oxidation stability and high corrosivity, so it should be deoxygenation upgraded as a high grade fuel. In this review, the effect of reaction atmosphere and nature of catalyst on the reaction pathways of the deoxygenation of fatty acids model compounds is discussed firstly. Then, related researches are reviewed based on crude oil of microalgal. Finally, problems in current bio-oil catalytic deoxygenation technologies, improvement advices and future prospect are also presented.
A review of hydrodeoxygenation of bio-oil: model compounds, catalysts, and equipment

Lu Qu,Xia Jiang,Zihao Zhang,Xiang-gang Zhang,Guo-yong Song,Hua-lin Wang,Yuan-ping Yuan,Yu-long Chang

DOI: https://doi.org/10.1039/d1gc03183j

IF: 9.8

2021-01-01

Green Chemistry

Abstract:Bio-oils are an important part of the future energy composition.

chemistry, multidisciplinary,green & sustainable science & technology
Emerging catalysis in solvent-free hydrodeoxygenation of waste lipids under mild conditions: A review

Shiyou Xing,Junying Fu,Ming Li,Gaixiu Yang,Pengmei Lv

DOI: https://doi.org/10.1016/j.rser.2024.114459

IF: 16.799

2024-05-22

Renewable and Sustainable Energy Reviews

Abstract:Waste lipids, which are generated in enormous quantities worldwide each year (over 10 million tons), are a type of green and sustainable energy source. The production of renewable fuels from these waste lipids is therefore of great interest due to their contribution to carbon neutrality. The advancement of hydrodeoxygenation (HDO), which enables the production of fossil-like hydrocarbon fuels, offers tantalizing prospects. However, realistically scaling up HDO is still a challenge due to high production costs. Designing a catalyst that enables efficient HDO under mild and solvent-free conditions would significantly contribute to reducing production costs. In this context, the new catalysts, and the corresponding strategies for catalytic HDO processing of waste lipids were reviewed and summarized. First, the HDO reaction pathways, products, and solvation effects were presented. The development of state-of-the-art HDO catalysts with a focus on alleviating the reaction conditions was summarized. Mechanistic insights into HDO conversion based on density functional theory (DFT) calculations were also reviewed. Discussions of other promising deoxygenation strategies such as electro-/photo-catalysis were included. Finally, future developments and directions on the catalytic strategy for mild HDO conversion were suggested.

energy & fuels,green & sustainable science & technology
Research Advances of Catalysts for the Hydrodeoxygenation of Oxygenic Compounds

SANG Xiaoyi,LI Huifeng,LI Mingfeng,LI Dadong

DOI: https://doi.org/10.3969/j.issn.1001-8719.2014.06.024

2014-01-01

Abstract:As the oil reserves are decreasing , bio‐oil as an alternative fuel source has attracted much attention .Bio‐oil contains a lot of oxygenic compounds and the oxygen content is generally more than 30% , leading to its low heating value and thermal instability , so it must be hydrotreated to remove the oxygen .Hydrodeoxygenation (HDO) is an effective way to upgrading bio‐oil .Catalysts for HDO are the traditional hydrodesulphurization (HDS ) catalysts , such as Co‐MoS2/Al2 O3 or metal catalysts .The type of catalysts used for bio‐oil HDO , the reason of catalyst deactivation and the method to improve the stability of catalyst were reviewed , in addition , the future research direction and the effective way for improving the catalyst activity were proposed .
Catalytic Hydrothermal Deoxygenation of Stearic Acid with Ru/C: Effects of Alcohol- and Carboxylic Acid-Based Hydrogen Donors

Jianyu Wang,Xiaoyi Yao,Yalin Li,Jing Zhang,Chun Zhao,Timothy J. Strathmann

DOI: https://doi.org/10.1021/acsomega.3c01975

IF: 4.1

2023-05-24

ACS Omega

Abstract:Catalytic hydrothermal processing is a promising technologyforthe production of biofuels used in transportation to alleviate theenergy crisis. An important challenge for these processes is the needfor an external supply of hydrogen gas to accelerate the deoxygenationof fatty acids or lipids. It follows that in situ-produced hydrogencan improve process economics. This study reports on the use of variousalcohol and carboxylic acid amendments as sources for in situ hydrogenproduction to accelerate Ru/C-catalyzed hydrothermal deoxygenationof stearic acid. Addition of these amendments significantly increasesyields of liquid hydrocarbon products, including the major productheptadecane, from stearic acid conversion at subcritical conditions(330 °C, 14–16 MPa during the reaction). This researchprovided guidance for simplifying the catalytic hydrothermal processof biofuel production, making the production of the desired biofuelin one pot possible without the need for an external H2 supply.

chemistry, multidisciplinary
Cost-effective Routes for Catalytic Biomass Upgrading

W. Jin,L. Pastor-Perez,Jie Yu,J. A. Odriozola,S. Gu,T. R. Reina

DOI: https://doi.org/10.1016/j.cogsc.2019.12.008

IF: 9.3

2020-01-01

Current Opinion in Green and Sustainable Chemistry

Abstract:Catalytic hydrodeoxygenation (HDO) is a fundamental and promising route for bio-oil upgrading to produce petroleum-like hydrocarbon fuels or chemical building blocks. One of the main challenges of this technology is the demand of high-pressure H2, which poses high costs and safety concerns. Accordingly, developing cost-effective routes for biomass or bio-oil upgrading without the supply of commercial H2 is essential to implement the HDO at commercial scale. This article critically reviewed the very recent studies relating to the novel strategies for upgrading the biofeedstocks with ‘green’ H2 generated from renewable sources. More precisely, catalytic transfer hydrogenation/hydrogenolysis, combined reforming and HDO, combined metal hydrolysis and HDO, water-assisted in-situ HDO and nonthermal plasma technology and self-supported hydrogenolysis are reviewed herein. Current challenges and research trends of each strategy are also proposed aiming to motivate further improvement of these novel routes to become competitive alternatives to conventional HDO technology.
Hydrotreating of Lignocellulosic Bio-Oil (A Review)

G. O. Zasypalov,V. A. Klimovsky,E. S. Abramov,E. E. Brindukova,V. D. Stytsenko,A. P. Glotov

DOI: https://doi.org/10.1134/s0965544123090013

IF: 1.258

2024-02-04

Petroleum Chemistry

Abstract:This review discusses recent advances in catalytic hydrodeoxygenation of lignocellulosic biomass. Lignocellulosic biomass is the most promising plant-based raw material for the production of liquid engine fuels or individual petrochemical monomers. Among the several existing techniques for biomass processing, pyrolysis offers superior efficiency. Given that the bio-oil produced by biomass pyrolysis has unsatisfactory performance characteristics caused by the presence of oxygenates, this bio-oil cannot be used directly as a fuel. Hydrodeoxygenation using selective catalysts is able to reduce the oxygen content in bio-oil and to improve its performance characteristics. To this end, bifunctional catalysts that contain active metal sites on an acid support hold promise. Noble metals (e.g., Pt, Pd, and Ru) and/or transition metals (e.g., Ni, Co, and Mo), as well as sulfides and phosphides of transition metals, can be used as an active catalytic phase. Metal oxides (e.g., ZrO 2 , CeO 2 , Al 2 O 3 , and TiO 2 ), carbon, zeolites (e.g., ZSM-5, Y, Beta, and SAPO-11), and mesoporous silica-based materials (e.g., SBA-15 and MCM-41) have been most often used as supports in hydrodeoxygenation catalysts. However, the implementation and upscaling of the hydrodeoxygenation of biomass pyrolytic bio-oil is limited because of the rapid deactivation of the catalyst in the presence of water, due to sintering and leaching the active phase with acidic components of bio-oil. Therefore, the development of catalysts that would provide high activity and stability under bio-oil hydrodeoxygenation conditions has become one of the most pressing issues for the petrochemical industry.

energy & fuels,engineering, chemical,chemistry, physical, petroleum, organic
Hydrodeoxygenation of lignin-derived bio-oil using molecular sieves supported metal catalysts: A critical review

Xiangping Li,Guanyi Chen,Caixia Liu,Wenchao Ma,Beibei Yan,Jianguang Zhang

DOI: https://doi.org/10.1016/j.rser.2016.12.057

IF: 16.799

2017-05-01

Renewable and Sustainable Energy Reviews

Abstract:It is an economical and environment-friendly method to produce renewable and sustainable oil by upgrading pyrolysis bio-oil containing phenolics. Among all upgrading methods, the hydrodeoxygenation (HDO)-based method of converting bio-oil into renewable fuels is one of the most promising and interesting technologies for the bio-oil refining, which can produce renewable fuels that have comparable quality to conventional fossil fuels. A high hydrogen pressure is usually required for HDO process when using the traditional hydrotreating catalysts. In recent years, molecular sieves supported noble metal and/or transition metal catalysts have been introduced in the reaction of lignin-derived bio-oil upgrading.. This paper summaries the HDO catalysts such as noble metal and transition metal catalysts that are supported on microporous molecular sieves, mesoporous molecular sieves and porous molecular sieves, as well as the HDO activities and the HDO reaction pathyways. The investigation of hydrodeoxygenation of phenolic model compounds in bio-oil over various metal(s)/molecular sieves is crucial to understand catalyst behavior for the hydrodeoxygenation process and to illuminate the reaction pathways of hydrodeoxygenation.

energy & fuels,green & sustainable science & technology
Catalytic hydrodeoxygenation of pyrolysis bio-oil to jet fuel: A review

Zhongyang Luo,Wanchen Zhu,Feiting Miao,Jinsong Zhou

DOI: https://doi.org/10.1007/s11708-024-0943-7

2024-01-01

Frontiers in Energy

Abstract:Bio-oil from biomass pyrolysis cannot directly substitute traditional fuel due to compositional deficiencies. Catalytic hydrodeoxygenation (HDO) is the critical and efficient step to upgrade crude bio-oil to high-quality bio-jet fuel by lowering the oxygen content and increasing the heating value. However, the hydrocracking reaction tends to reduce the liquid yield and increase the gas yield, causing carbon loss and producing hydrocarbons with a short carbon-chain. To obtain high-yield bio-jet fuel, the elucidation of the conversion process of biomass catalytic HDO is important in providing guidance for metal catalyst design and optimization of reaction conditions. Considering the complexity of crude bio-oil, this review aimed to investigate the catalytic HDO pathways with model compounds that present typical bio-oil components. First, it provided a comprehensive summary of the impact of physical and electronic structures of both noble and non-noble metals that include monometallic and bimetallic supported catalysts on regulating the conversion pathways and resulting product selectivity. The subsequent first principle calculations further corroborated reaction pathways of model compounds in atom-level on different catalyst surfaces with the experiments above and illustrated the favored C–O/C=O scission orders thermodynamically and kinetically. Then, it discussed hydrogenation effects of different H-donors (such as hydrogen and methane) and catalysts deactivation for economical and industrial consideration. Based on the descriptions above and recent researches, it also elaborated on catalytic HDO of biomass and bio-oil with multi-functional catalysts. Finally, it presented the challenges and future prospective of biomass catalytic HDO.
Catalytic deoxygenation of carboxyl compounds in the hydrothermal liquefaction crude bio-oil via in-situ hydrogen supply by CuO-CeO2/ γ -Al2O3 catalyst

Hongbiao Du,Qi Yu,Guohua Liu,Jie Li,Jinglai Zhang,Wenjia Wang,Guoyi Duan,Yanghao Meng,Haijiao Xie

DOI: https://doi.org/10.1016/j.fuel.2022.123367

IF: 7.4

2022-06-01

Fuel

Abstract:Hydrothermal liquefaction (HTL) has drawn great attention as a potential method to produce bio-oil from biomass waste. However, bio-crude from HTL shows undesired high-oxygen content and needs further deoxygenation upgrading. Herein, stearic acids as a model carboxylic compounds in HTL bio-crude was employed to investigate catalytic deoxygenation performance. Results showed that (CuO) 10 -CeO2/ γ -Al2O3 had the most superior catalytic deoxygenation performance for the stearic acids. The maximum stearic acid conversion rate (96.36%) and total hydrocarbon yield (88.79%) were obtained at 300 °C , 12 h , ratio of stearic acid to water 1 : 4 . The main catalytic deoxygenation pathways were proposed: carbon monoxide generation (decarbonylation) – in-situ hydrogen generation (water–gas shift) – short-chain fatty acid generation (hydrogenolysis) – n-alkanes generation (decarboxylation, hydrodeoxygenation and hydrogenation). DFT calculation elucidated that CuO-CeO2 reduced the activation energy from 24.8 kcal mol −1 (vacuum) to 15.0 kcal mol −1 (catalytic). Thus, deoxygenation via CuO-CeO2/ γ -Al2O3 would be an effective method for upgrading HTL bio-crude.

energy & fuels,engineering, chemical
Hydrodeoxygenation of Water-Insoluble Bio-Oil to Alkanes Using a Highly Dispersed Pd–Mo Catalyst

Haohong Duan,Juncai Dong,Xianrui Gu,Yung-Kang Peng,Wenxing Chen,Titipong Issariyakul,William K. Myers,Meng-Jung Li,Ni Yi,Alexander F. R. Kilpatrick,Yu Wang,Xusheng Zheng,Shufang Ji,Qian Wang,Junting Feng,Dongliang Chen,Yadong Li,Jean-Charles Buffet,Haichao Liu,Shik Chi Edman Tsang,Dermot O’Hare

DOI: https://doi.org/10.1038/s41467-017-00596-3

IF: 16.6

2017-01-01

Nature Communications

Abstract:Bio-oil, produced by the destructive distillation of cheap and renewable lignocellulosic biomass, contains high energy density oligomers in the water-insoluble fraction that can be utilized for diesel and valuable fine chemicals productions. Here, we show an efficient hydrodeoxygenation catalyst that combines highly dispersed palladium and ultrafine molybdenum phosphate nanoparticles on silica. Using phenol as a model substrate this catalyst is 100% effective and 97.5% selective for hydrodeoxygenation to cyclohexane under mild conditions in a batch reaction; this catalyst also demonstrates regeneration ability in long-term continuous flow tests. Detailed investigations into the nature of the catalyst show that it combines hydrogenation activity of Pd and high density of both Brønsted and Lewis acid sites; we believe these are key features for efficient catalytic hydrodeoxygenation behavior. Using a wood and bark-derived feedstock, this catalyst performs hydrodeoxygenation of lignin, cellulose, and hemicellulose-derived oligomers into liquid alkanes with high efficiency and yield.Bio-oil is a potential major source of renewable fuels and chemicals. Here, the authors report a palladium-molybdenum mixed catalyst for the selective hydrodeoxygenation of water-insoluble bio-oil to mixtures of alkanes with high carbon yield.
Selective hydrodeoxygenation of bio-oil model compounds and mixtures over CuCoO x catalysts under mild conditions

Zuyi Zhang,Xiaofeng Wang,Chenxiang Wang,Ziyi Yan,Guangyao Zhuang,Nan Ma,Qingbo Li

DOI: https://doi.org/10.1016/j.cej.2024.149367

IF: 15.1

2024-02-07

Chemical Engineering Journal

Abstract:Hydrodeoxygenation (HDO) is an effective technology for upgrading the quality of bio-oil. Despite the considerable research endeavors in recent years, the reaction conditions employed have been notably severe, and there remains a scarcity of investigations into the potential components in bio-oil. In the present study, a series of CuCoO x catalysts were synthesized for HDO reactions of guaiacol (GUA), vanillin (VAN), and levulinic acid (LA) using isopropanol as a hydrogen donor. Under mild reaction conditions (150–190 °C), the optimal CuCoO x catalyst exhibited good performance, yielding ∼99 % of the desired products from the respective model compounds. Notably, competitive HDO with esterification was observed at 150–170 °C when co-hydrotreating the mixtures of GUA, VAN, and LA over the CuCoO x catalyst. Upon increasing the reaction temperature to 190 °C, the esterification between compounds in the mixtures was inhibited, and all compounds were converted to products with low oxygen content. Further, various characterizations substantiated the robust adsorption capabilities of the optimal catalyst towards methoxy, carbonyl, and aromatic moieties. In addition, the Cu 1 Co 10 O x -300 catalyst demonstrated the capacity to transform high-oxygen compounds present in pyrolysis oil into species with diminished oxygen content, and in some cases, into hydrocarbon compounds. The present study presents a promising approach for the efficient conversion of single model compounds and mixtures into value-added chemicals and fuels under mild conditions.

engineering, chemical, environmental
Catalytic Applications in the Production of Hydrotreated Vegetable Oil (HVO) as a Renewable Fuel: A Review

Nur-Sultan Mussa,Kainaubek Toshtay,Mickael Capron

DOI: https://doi.org/10.3390/catal14070452

IF: 3.9

2024-07-15

Catalysts

Abstract:The significance and challenges of hydrotreatment processes for vegetable oils have recently become apparent, encompassing various reactions like decarbonylation, decarboxylation, and hydrogenation. Heterogeneous noble or transition metal catalysts play a crucial role in these reactions, offering high selectivity in removing oxygen and yielding desired hydrocarbons. Notably, both sulphided and non-sulphided catalysts exhibit effectiveness, with the latter gaining attention due to health and toxicity concerns associated with sulphiding agents. Nickel-based catalysts, such as NiP and NiC, demonstrate specific properties and tendencies in deoxygenation reactions, while palladium supported on activated carbon catalysts shows superior activity in hydrodeoxygenation. Comparisons between the performances of different catalysts in various hydrotreatment processes underscore the need for tailored approaches. Transition metal phosphides (TMP) emerge as promising catalysts due to their cost-effectiveness and environmental friendliness. Ultimately, there is an ongoing pursuit of efficient catalysts and the importance of further advancements in catalysis for the future of vegetable oil hydrotreatment.

chemistry, physical
Recent advancement in deoxygenation of fatty acids via homogeneous catalysis for biofuel production

Mojtaba Tabandeh,Chin Kui Cheng,Gabriele Centi,Pau Loke Show,Wei-Hsin Chen,Tau Chuan Ling,Hwai Chyuan Ong,Eng-Poh Ng,Joon Ching Juan,Su Shiung Lam

DOI: https://doi.org/10.1016/j.mcat.2020.111207

IF: 4.6

2022-05-01

Molecular Catalysis

Abstract:<p>Fuel-like hydrocarbons (also known as biofuel) isolated from the deoxygenation of fatty acids present different advantages as compared with fossil fuels. In particular, the homogeneous and heterogeneous catalytic deoxygenation methods have been the center of attention during recent years. Although catalytic deoxygenation of fatty acids via heterogeneous catalysis has been widely investigated, there is a high demand to review the progress in using the homogeneous catalysis pathways. Among the various homogeneous pathways, radical-based reactions and transition metal catalysis demonstrate the most promising results in the decarboxylation and decarbonylation processes. It is shown that radical-based reactions are more active in decarboxylation meanwhile the transition metal catalysts are rather selective to decarbonylation of fatty acids. Besides, the reaction conditions and type of catalysts are capable of enhancing biofuel production. Homogenous catalysis provides the huge potential for commercializing viability of biofuel via deoxygenation of fatty acids.</p>

chemistry, physical
Recent advances in heterogeneous catalytic hydrodeoxygenation of biomass-derived oxygenated furanics mediated by formic acid

Sudeep Mudhulu,Zi-Jie Gong,Hao-Chuan Ku,Yi-Hsuan Lu,Wen-Yueh Yu

DOI: https://doi.org/10.1016/j.mtsust.2022.100199

IF: 7.244

2022-11-01

Materials Today Sustainability

Abstract:The hydrodeoxygenation is a prominent valorization approach to upgrade biomass-derived platform compounds, i.e. furfural (FF) and 5-hydroxymethylfurfural (HMF), into the value-added fuels and chemicals. As a promising alternative to molecular H2, formic acid (HCOOH) has been extensively investigated as a liquid organic hydrogen donor for the transfer hydrogenation of biomass derivatives. In this study, the recent advances in the heterogeneous catalytic HCOOH-mediated hydrodeoxygenation processes of FF and HMF (especially, the hydrogenation of C=O bond and hydrogenolysis of C–O bond) are systematically reviewed by summarizing the heterogeneous catalysts developed and reaction conditions reported in literature. Furthermore, the reaction mechanisms including the individual and combined activations of hydrogen donor (HCOOH) and substrates (FF and HMF) on the catalyst surface are also discussed in order to provide fundamental insights into the associated reaction mechanisms for the future catalyst design. It is believed that this review may serve as a concise guideline on the development of heterogeneous catalysts for the upgradation of biomass-derived oxygenated furanics using HCOOH as the hydrogen donor.

materials science, multidisciplinary,green & sustainable science & technology

Catalytic Hydrothermal Deoxygenation of Lipids and Fatty Acids to Diesel-Like Hydrocarbons: a Review

Dilemma and Strategies for Production of Diesel-Like Hydrocarbons by Deoxygenation of Biomass-Derived Fatty Acids

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Catalytic hydrothermal deoxygenation of palmitic acid (vol 3, pg 311, 2010)

Deoxygenation of fatty acid to produce diesel-like hydrocarbons: A review of process conditions, reaction kinetics and mechanism

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Recent advances on catalytic deoxygenation upgrading of liquefaction microalgae bio oil

A review of hydrodeoxygenation of bio-oil: model compounds, catalysts, and equipment

Emerging catalysis in solvent-free hydrodeoxygenation of waste lipids under mild conditions: A review

Research Advances of Catalysts for the Hydrodeoxygenation of Oxygenic Compounds

Catalytic Hydrothermal Deoxygenation of Stearic Acid with Ru/C: Effects of Alcohol- and Carboxylic Acid-Based Hydrogen Donors

Cost-effective Routes for Catalytic Biomass Upgrading

Hydrotreating of Lignocellulosic Bio-Oil (A Review)

Hydrodeoxygenation of lignin-derived bio-oil using molecular sieves supported metal catalysts: A critical review

Catalytic hydrodeoxygenation of pyrolysis bio-oil to jet fuel: A review

Catalytic deoxygenation of carboxyl compounds in the hydrothermal liquefaction crude bio-oil via in-situ hydrogen supply by CuO-CeO2/ γ -Al2O3 catalyst

Hydrodeoxygenation of Water-Insoluble Bio-Oil to Alkanes Using a Highly Dispersed Pd–Mo Catalyst

Selective hydrodeoxygenation of bio-oil model compounds and mixtures over CuCoO x catalysts under mild conditions

Catalytic Applications in the Production of Hydrotreated Vegetable Oil (HVO) as a Renewable Fuel: A Review

Recent advancement in deoxygenation of fatty acids via homogeneous catalysis for biofuel production

Recent advances in heterogeneous catalytic hydrodeoxygenation of biomass-derived oxygenated furanics mediated by formic acid