A review of hydrodeoxygenation of bio-oil: model compounds, catalysts, and equipment

Lu Qu,Xia Jiang,Zihao Zhang,Xiang-gang Zhang,Guo-yong Song,Hua-lin Wang,Yuan-ping Yuan,Yu-long Chang

DOI: https://doi.org/10.1039/d1gc03183j

IF: 9.8

2021-01-01

Green Chemistry

Abstract:Bio-oils are an important part of the future energy composition.

chemistry, multidisciplinary,green & sustainable science & technology

What problem does this paper attempt to address?

Dilemma and Strategies for Production of Diesel-Like Hydrocarbons by Deoxygenation of Biomass-Derived Fatty Acids

Hongju Lin,Xiyan Chen,Yanchang Chu,Jie Fu,Le Yang

DOI: https://doi.org/10.1016/j.gee.2024.08.005

IF: 12.781

2024-01-01

Green Energy & Environment

Abstract:The valorization of biomass to produce biofuels has become a heavily investigated field due to the depletion of fossil fuels and environmental concerns. Among them, the research on deoxygenation of fatty acids or esters derived from biomass as well as municipal sludge organics to produce diesel-like hydrocarbons has become a hot topic. Fatty acid is a key intermediate derived from ester hydrolysis, therefore has attracted more attention as a model compound. In this review, we first introduce and compare the three reaction pathways of hydrodeoxygenation, decarboxylation and decarbonylation, for the deoxygenation of fatty acids and esters. The preference of reaction pathway is closely related to the type of raw materials and catalysts as well as reaction conditions. The special purpose of this review is to summarize the dilemma and possible strategies for deoxygenation of fatty acids, which is expected to provide guidance for future exploration and concentrates. The atom utilization along with stability during reaction in a long time is the most important index for commercial economy. Herein, we propose that the rational design and delicate synthesis of stable single-atom non-noble catalysts may be the best solution. The ultimately goal is aiming to develop sustainable production of green diesel hydrocarbons.
Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Riyang Shu,Biqin Lin,Chao Wang,Jingtao Zhang,Zhengdong Cheng,Ying Chen

DOI: https://doi.org/10.1016/j.fuel.2018.11.107

IF: 7.4

2018-01-01

Fuel

Abstract:Noble metal catalyst has an outstanding catalytic activity on the hydrodeoxygenation (HDO) process, but its high cost limits large-scale application. Herein, we put forward a novel photochemical method to prepare the highly dispersed Pt/TiO2 catalyst with a low metal loading. And it presented an efficient performance on the HDO of phenolic compounds and real bio-oil. Guaiacol could be converted into cyclohexane with 95.1% selectivity at 280 degrees C under 1 MPa H-2 atmosphere. Characterization results revealed that the high Pt dispersion was the critical factor for the high catalytic activity. And the photochemical method preferred to achieve high metal dispersion due to the room temperature condition. Other typical phenolic monomers and dimers were able to transform into hydrocarbons with most yield above 80%, wherein not only the deoxygenation step, but also the cleavage of ether bonds can be realized in one pot. This catalytic system was also effective on the upgrade of bio-oil derived from the pyrolysis of cotton straw. Hydrocarbon content increased to 33.80% from 11.33%. Alkylphenols content increased to 51.38% from 27.86%. These two products can be used as value-added fuels and chemicals, respectively. Guaiacols and syringols were completely converted into alkylphenols and hydrocarbon. The amount of other oxygenated compounds also decreased significantly. This simple and active catalytic system is potential to apply widely for the upgrade of raw bio-oil.
Research Advances of Catalysts for the Hydrodeoxygenation of Oxygenic Compounds

SANG Xiaoyi,LI Huifeng,LI Mingfeng,LI Dadong

DOI: https://doi.org/10.3969/j.issn.1001-8719.2014.06.024

2014-01-01

Abstract:As the oil reserves are decreasing , bio‐oil as an alternative fuel source has attracted much attention .Bio‐oil contains a lot of oxygenic compounds and the oxygen content is generally more than 30% , leading to its low heating value and thermal instability , so it must be hydrotreated to remove the oxygen .Hydrodeoxygenation (HDO) is an effective way to upgrading bio‐oil .Catalysts for HDO are the traditional hydrodesulphurization (HDS ) catalysts , such as Co‐MoS2/Al2 O3 or metal catalysts .The type of catalysts used for bio‐oil HDO , the reason of catalyst deactivation and the method to improve the stability of catalyst were reviewed , in addition , the future research direction and the effective way for improving the catalyst activity were proposed .
Advances in hydrodeoxygenation catalysts for upgrading bio-oils

An-ji WANG,Yao WANG,Zhi-quan YU,Ting DONG,Xiang LI,Yong-ying CHEN

DOI: https://doi.org/10.7511/dllgxb201603016

2016-01-01

Abstract:With the dwindling of fossil energy , much attention has been paid to the research of renewable bio‐oil from lignocellulose biomass .Compared with the petroleum ,the high oxygen content imparts some disadvantages to the bio‐oil ,such as low energy density ,high viscosity ,poor thermal and chemical stability .The bio‐oil must be further deoxygenated to supply the conventional engine fuel .Hydrodeoxygenation (HDO) is the most common and promising method to upgrade bio‐oil .The development of HDO catalyst for lignocellulose bio‐oil ,including transition metal sulfide ,phosphide , nitride and carbide ,noble metal ,“metal‐acid” bi‐functional catalyst ,transition metal and amorphous alloy ,is reviewed . Over transition metal sulfide , the sulfur might be replaced by oxygen from oxygenates and water ,leading to the deactivation .Noble metal possesses higher HDO activity and product selectivities , w hereas the high cost and less resources suppress the large‐scale industrial application . T ransition metal nitride , carbide and transition metal have been show n to hydrodeoxygenate bio‐oil effectively ,but the oxygen accumulation and carbon deposition might lead to the deactivation . Despite the high HDO activity of amorphous alloy , the thermostability is poor . However ,transition metal phosphide attracts more attention ,due to the high HDO activity and good stability .The support effect is summarized as surface properties and pore structure . Moreover , carbon deposition and structure damage are the main causes of catalyst deactivation .
A Review on Recent Advances in Clean Microalgal Bio-Oil Production Via Catalytic Hydrothermal Deoxygenation

Xu Liu,Yang Guo,Donghai Xu,Qingqing Guan

DOI: https://doi.org/10.1016/j.jclepro.2022.132978

IF: 11.1

2022-01-01

Journal of Cleaner Production

Abstract:Converting microalgae biomass into bio-oil in hydrothermal condition is a suitable and promising way to pro-duce alternative liquid fuel yet challenging in high oxygen content of resultant oil product for further commercial application. Deoxygenation mechanism in hydrothermal condition has significant difference with that in organic solvent due to unique physicochemical property of water in sub-and supercritical state. Accordingly, this paper reviews recent advances on hydrothermal catalytic deoxygenation of microalgal bio-crude oil. The specific role of high-temperature water played on deoxygenation process is discussed. And the effects of several experimental variables including temperature, reaction time, solvent and hydrothermal processing technology on deoxygen-ation are systematically illustrated. Finally, catalytic activity and mechanism of metal and acid-based catalysts involved in deoxygenation of typical aliphatic and aromatic oxygen-containing model compounds under hy-drothermal conditions are elaborated as well. This review summarizes the process of HDO of microalgae bio-oil from HTL and provides a general scientific reference for further studies.
An Overview on Catalytic Hydrodeoxygenation of Pyrolysis Oil and Its Model Compounds

Zhan Si,Xinghua Zhang,Chenguang Wang,Longlong Ma,Renjie Dong

DOI: https://doi.org/10.3390/catal7060169

IF: 3.9

2017-01-01

Catalysts

Abstract:Pyrolysis is considered the most promising way to convert biomass to fuels. Upgrading biomass pyrolysis oil is essential to produce high quality hydrocarbon fuels. Upgrading technologies have been developed for decades, and this review focuses on the hydrodeoxygenation (HDO). In order to declare the need for upgrading, properties of pyrolysis oil are firstly analyzed, and potential analysis methods including some novel methods are proposed. The high oxygen content of bio-oil leads to its undesirable properties, such as chemical instability and a strong tendency to re-polymerize. Acidity, low heating value, high viscosity and water content are not conductive to making bio-oils useful as fuels. Therefore, fast pyrolysis oils should be refined before producing deoxygenated products. After the analysis of pyrolysis oil, the HDO process is reviewed in detail. The HDO of model compounds including phenolics monomers, dimers, furans, carboxylic acids and carbohydrates is summarized to obtain sufficient information in understanding HDO reaction networks and mechanisms. Meanwhile, investigations of model compounds also make sense for screening and designing HDO catalysts. Then, we review the HDO of actual pyrolysis oil with different methods including two-stage treatment, co-feeding solvents and in-situ hydrogenation. The relative merits of each method are also expounded. Finally, HDO catalysts are reviewed in order of time. After the summarization of petroleum derived sulfured catalysts and noble metal catalysts, transitional metal carbide, nitride and phosphide materials are summarized as the new trend for their low cost and high stability. After major progress is reviewed, main problems are summarized and possible solutions are raised.
Advances and Perspectives of Bio-oil Hydrotreatment for Biofuel Production

Mortaza Gholizadeh,Shu Zhang,Xun Hu,Yi Wang

DOI: https://doi.org/10.1021/acs.energyfuels.3c01647

IF: 4.6541

2023-07-10

Energy & Fuels

Abstract:Bio-oil is a liquid product produced from the pyrolysis of renewable biomass, and the potential application of bio-oil as liquid fuel attracts great interest. However, bio-oil has to be upgraded via processes like hydrodeoxygenation to remove the abundance of oxygen that makes bio-oil high acidity, low stability, low heating value, etc. Up to now, numerous efforts have been devoted to upgrading bio-oil through development of catalysts, reactors, processes, etc. One of the key criteria for assessing the feasibility of the previous trials is the specification of biofuel generated. Hence, this review mainly discusses the features of biofuels produced from different biomass feedstocks. The aim was to try to understand the nature of the biofuel from varied biomass feedstocks (i.e., woody biomass, grass, algae, etc.) and the associated issues in the hydrotreatment process. The environmental impact and economic analysis of the production of biofuel from different types of biomass are also discussed.

energy & fuels,engineering, chemical
Selective hydrodeoxygenation of bio-oil model compounds and mixtures over CuCoO x catalysts under mild conditions

Zuyi Zhang,Xiaofeng Wang,Chenxiang Wang,Ziyi Yan,Guangyao Zhuang,Nan Ma,Qingbo Li

DOI: https://doi.org/10.1016/j.cej.2024.149367

IF: 15.1

2024-02-07

Chemical Engineering Journal

Abstract:Hydrodeoxygenation (HDO) is an effective technology for upgrading the quality of bio-oil. Despite the considerable research endeavors in recent years, the reaction conditions employed have been notably severe, and there remains a scarcity of investigations into the potential components in bio-oil. In the present study, a series of CuCoO x catalysts were synthesized for HDO reactions of guaiacol (GUA), vanillin (VAN), and levulinic acid (LA) using isopropanol as a hydrogen donor. Under mild reaction conditions (150–190 °C), the optimal CuCoO x catalyst exhibited good performance, yielding ∼99 % of the desired products from the respective model compounds. Notably, competitive HDO with esterification was observed at 150–170 °C when co-hydrotreating the mixtures of GUA, VAN, and LA over the CuCoO x catalyst. Upon increasing the reaction temperature to 190 °C, the esterification between compounds in the mixtures was inhibited, and all compounds were converted to products with low oxygen content. Further, various characterizations substantiated the robust adsorption capabilities of the optimal catalyst towards methoxy, carbonyl, and aromatic moieties. In addition, the Cu 1 Co 10 O x -300 catalyst demonstrated the capacity to transform high-oxygen compounds present in pyrolysis oil into species with diminished oxygen content, and in some cases, into hydrocarbon compounds. The present study presents a promising approach for the efficient conversion of single model compounds and mixtures into value-added chemicals and fuels under mild conditions.

engineering, chemical, environmental
Hydrodeoxygenation of lignin-derived bio-oil using molecular sieves supported metal catalysts: A critical review

Xiangping Li,Guanyi Chen,Caixia Liu,Wenchao Ma,Beibei Yan,Jianguang Zhang

DOI: https://doi.org/10.1016/j.rser.2016.12.057

IF: 16.799

2017-05-01

Renewable and Sustainable Energy Reviews

Abstract:It is an economical and environment-friendly method to produce renewable and sustainable oil by upgrading pyrolysis bio-oil containing phenolics. Among all upgrading methods, the hydrodeoxygenation (HDO)-based method of converting bio-oil into renewable fuels is one of the most promising and interesting technologies for the bio-oil refining, which can produce renewable fuels that have comparable quality to conventional fossil fuels. A high hydrogen pressure is usually required for HDO process when using the traditional hydrotreating catalysts. In recent years, molecular sieves supported noble metal and/or transition metal catalysts have been introduced in the reaction of lignin-derived bio-oil upgrading.. This paper summaries the HDO catalysts such as noble metal and transition metal catalysts that are supported on microporous molecular sieves, mesoporous molecular sieves and porous molecular sieves, as well as the HDO activities and the HDO reaction pathyways. The investigation of hydrodeoxygenation of phenolic model compounds in bio-oil over various metal(s)/molecular sieves is crucial to understand catalyst behavior for the hydrodeoxygenation process and to illuminate the reaction pathways of hydrodeoxygenation.

energy & fuels,green & sustainable science & technology
Overview on Hydrogen Production by Upgrading of Water Soluble Fractions in Bio-Oil

XIE Jianjun,YIN Xiuli,HUANG Yanqin,WU Chuangzhi

DOI: https://doi.org/10.3969/j.issn.1001-8719.2011.05.028

2011-01-01

Abstract:With the fossil fuel depletion increasing and global warming,hydrogen has attracted much attention as a clean energy carrier.Bio-oil,a mixture of organic oxygenates that derived from biomass pyrolysis process,has many virtues,such as easy to store and transport,renewable and CO2 neutral,which makes it being a potential feedstock for hydrogen production.In this paper the present status of hydrogen production from water soluble fractions in bio-oil,such as steam reforming,auto-thermal reforming and aqueous-phase reforming are critically reviewed,issues on mechanism of hydrogen production,state-of-the-art,key scientific and technical problems of the three above mentioned processes are analyzed.Besides,the characteristics,advantages and also disadvantages of the three processes in terms of industrial applications as well as their potential solutions are also presented.Further,for the purpose of solving the long-standing bottleneck problems on industrial applications of bio-oil,several research items to be urgently dealt with in the near future involved with hydrogen production from bio-oil are finally pointed out briefly.
Recent progress on upgrading of bio-oil to hydrocarbons over metal/zeolite bifunctional catalysts

Yanchun Shi,Enhui Xing,Kejing Wu,Jianlong Wang,Mingde Yang,Yulong Wu

DOI: https://doi.org/10.1039/c7cy00574a

IF: 6.177

2017-01-01

Catalysis Science & Technology

Abstract:Upgrading of bio-oil is of high necessity and popularity in converting biomass to high-quality hydrocarbons (transportation fuels and petrochemicals) to reduce the overall CO2 emissions of fossil based materials. There are hundreds of different oxygenated compounds identified in bio-oil, resulting in a high oxygen content (30% to 50%). This review focuses on recent progress in the upgrading of bio-oil over metal/zeolite bifunctional catalysts, with model compounds and real bio-oil included. Firstly, typical model compounds and corresponding reaction routes are summarized, based upon the composition of the bio-oil and a basic knowledge of chemical reactions. Secondly, careful analyses are conducted on the deoxygenation mechanisms over different metal active centers and acid-catalyzed reactions, such as isomerization and cracking, over zeolitic acid sites, respectively. Moreover, detailed analyses have focused on the effect of metal loadings on zeolites, the effects of zeolitic porosity and acidity on the metal, and their overall effects on reaction activity, selectivity and stability. Thirdly, the fundamental understanding of the interaction between the metal centers and zeolite acid sites in bifunctional catalysts and their influences on complex reaction networks, including deoxygenation and acid-catalyzed reactions, is analyzed. The metal/acid balance may be the key in improving the catalytic activity and product selectivity in the upgrading of bio-oil, which needs further careful design. Finally, the potential challenges and opportunities for the upgrading of bio-oil over metal/zeolite bifunctional catalysts are outlined.
Recent Progress in Hydrodeoxygenation of Biomass-based Oxygenates

张颖,韩铮,徐禄江,傅尧

DOI: https://doi.org/10.3969/j.issn.0253-2417.2016.06.017

2016-01-01

Abstract:In the preparation of the biofuel or biochemical process, reducing the oxygen content of the feedstock and improving hydrogen carbon ratio are very important. The hydrodeoxygenation is the key to this process. With the expect to provide a reference for finding a highly efficient, green, economic and sustainable catalytic system that can convert biomass into biofuel, this paper focused on the elementary reactions of hydrodeoxygenation and reviewed the development of hydrodeoxygenation reaction according to the differences of oxygen-contained compounds′structure and catalytic systems.
Recent advances on catalytic deoxygenation upgrading of liquefaction microalgae bio oil

Ranran Ding,Yulong Wu,Yu Chen,Yanan Duan,Mingde Yang

DOI: https://doi.org/10.3969/j.issn.0438-1157.2014.07.028

2014-01-01

Abstract:Fuel production from renewable and carbon-neutral biomass has attracted much attention due to concerns for the depletion of petroleum reserves and global warming by greenhouse gases. Microalgae offer several advantages over conventional biomass as they have faster growth rate, do not require agricultural land for growth, and consume less water than terrestrial biomass. However, crude bio-oil from noncatalytic liquefaction of microalgae has a high content of oxygen, limiting its direct applications for transportation fuel. The high oxygen content suffers from some drawbacks such as lower energy density, poor oxidation stability and high corrosivity, so it should be deoxygenation upgraded as a high grade fuel. In this review, the effect of reaction atmosphere and nature of catalyst on the reaction pathways of the deoxygenation of fatty acids model compounds is discussed firstly. Then, related researches are reviewed based on crude oil of microalgal. Finally, problems in current bio-oil catalytic deoxygenation technologies, improvement advices and future prospect are also presented.
Upgrading technologies and catalytic mechanisms for heteroatomic compounds from bio-oil-A review

Chengwang Zhao,Chen Hong,Jiashuo Hu,Yi Xing,Wei Ling,Bo Zhang,Yijie Wang,Lihui Feng

DOI: https://doi.org/10.1016/j.fuel.2022.126388

IF: 7.4

2023-01-01

Fuel

Abstract:This paper reviews the research progress of heteroatomic compound treatment technology in bio-oil. Bio-oil fuels are expected to be a renewable energy source instead of fossil fuels. However, the heteroatomic compounds such as oxygen, nitrogen and sulfur compounds in bio-oil can affect the combustion performance and cause environmental impact during the combustion process, so the heteroatomic compounds need to be removed. The heteroatom removal techniques are widely used in the preparation of bio-oil from biomass, including biomass washing treatments, catalytic cracking, catalytic hydrotreating, and other techniques such as adsorption denitrification and adsorption dichlorination and co-pyrolysis. And the catalytic mechanism is discussed. The removal effects of different catalysts and different methods are also compared. Many researchers are using various techniques to treat heteroatomic compounds in bio-oil, so it is necessary to summarize and analyze them to provide a reference for future research directions.
A Review of Bio-Oil Production from Hydrothermal Liquefaction of Algae

Yang Guo,Thomas Yeh,Wenhan Song,Donghai Xu,Shuzhong Wang

DOI: https://doi.org/10.1016/j.rser.2015.04.049

IF: 16.799

2015-01-01

Renewable and Sustainable Energy Reviews

Abstract:Algae is generally regarded as the only source of renewable biodiesel that is capable of meeting the global demand for transport fuels. Hydrothermal liquefaction is the method of dissolving organic compounds in subcritical water at high ion product, which can accelerate the acid-catalyzed and hydrolytic decomposition of algal macromolecules. This promising process converts different algal strains with high moisture content to high bio-oil yields with lower coke and lower energy consumption in comparison to other methods. The properties of the resulting bio-oil are clearly affected by parameters such as temperature, reaction time, algae species, algae concentration, reaction atmosphere, and catalysts, in subcritical water reaction conditions. This paper will provide an extensive review of the updated results on the hydrothermal liquefaction of microalgae. Including summary on the conversion of major compounds in microalgae and products related to the process and the influences of reaction conditions, catalysts and hydrotreating with comparing the variation tendencies and main results reported.
Minireview on Bio-Oil Upgrading via Electrocatalytic Hydrogenation: Connecting Biofuel Production with Renewable Power

Chun Ho Lam,Wei Deng,Lin Lang,Xin Jin,Xun Hu,Yi Wang

DOI: https://doi.org/10.1021/acs.energyfuels.0c01380

IF: 4.6541

2020-01-01

Energy & Fuels

Abstract:Electrocatalytic hydrogenation (ECH) can achieve catalytic hydrogenation at ambient temperature and atmospheric pressure with only a small potential applied between the cathode and the anode. The mild conditions and simplicity make ECH a convenient choice to upgrade bio-oil to combat its intrinsic corrosiveness and chemical instability. This Minireview discusses the recent advances in the ECH of bio-oil and analyzes the mechanism of different bio-oil model compounds during their ECH upgrading. The goal is to demonstrate the viability of ECH as a bio-oil stabilization strategy. The product selectivity control and the effect of electrode selection are also reviewed to explore the design of a more robust electrocatalyst. Lastly, the challenges and opportunities in the ECH of bio-oil are discussed to improve the prospect of the technology in large-scale implementation.
Upgrading of Bio‐Oil Model Compounds and Bio‐Crude into Biofuel by Electrocatalysis: A Review

Guanyi Chen,Lan Liang,Ning Li,Xukai Lu,Beibei Yan,Zhanjun Cheng

DOI: https://doi.org/10.1002/cssc.202002063

IF: 8.4

2021-01-05

ChemSusChem

Abstract:The limited fossil energy and serious environmental pollution have urged the emersion of bio‐oil, serving as an alternative, promising and green energy. However, bio‐oil generated from the rapid pyrolysis of biomass cannot be utilized immediately owing to its corrosivity, instability and low heating value. This paper reviews the electrocatalytic hydrogenation (ECH) process towards bio‐oil upgrading. Specifically, the ECH integrates the advantages of mild operating conditions, no petrochemical‐derived hydrogen and strong controllability. The influence of different factors on bio‐oil components conversion and product selectivity in the ECH process are presented comprehensively. In addition, various reaction mechanisms are discussed in the designed ECH systems. Finally, some challenges need to be further overcome for real bio‐oil reduction in the ECH process: exploration of efficient multifunctional electrocatalysts for specific bio‐oil components and determination of the dominate steps in the complicated reaction path network.

chemistry, multidisciplinary,green & sustainable science & technology
Hydrotreating of Lignocellulosic Bio-Oil (A Review)

G. O. Zasypalov,V. A. Klimovsky,E. S. Abramov,E. E. Brindukova,V. D. Stytsenko,A. P. Glotov

DOI: https://doi.org/10.1134/s0965544123090013

IF: 1.258

2024-02-04

Petroleum Chemistry

Abstract:This review discusses recent advances in catalytic hydrodeoxygenation of lignocellulosic biomass. Lignocellulosic biomass is the most promising plant-based raw material for the production of liquid engine fuels or individual petrochemical monomers. Among the several existing techniques for biomass processing, pyrolysis offers superior efficiency. Given that the bio-oil produced by biomass pyrolysis has unsatisfactory performance characteristics caused by the presence of oxygenates, this bio-oil cannot be used directly as a fuel. Hydrodeoxygenation using selective catalysts is able to reduce the oxygen content in bio-oil and to improve its performance characteristics. To this end, bifunctional catalysts that contain active metal sites on an acid support hold promise. Noble metals (e.g., Pt, Pd, and Ru) and/or transition metals (e.g., Ni, Co, and Mo), as well as sulfides and phosphides of transition metals, can be used as an active catalytic phase. Metal oxides (e.g., ZrO 2 , CeO 2 , Al 2 O 3 , and TiO 2 ), carbon, zeolites (e.g., ZSM-5, Y, Beta, and SAPO-11), and mesoporous silica-based materials (e.g., SBA-15 and MCM-41) have been most often used as supports in hydrodeoxygenation catalysts. However, the implementation and upscaling of the hydrodeoxygenation of biomass pyrolytic bio-oil is limited because of the rapid deactivation of the catalyst in the presence of water, due to sintering and leaching the active phase with acidic components of bio-oil. Therefore, the development of catalysts that would provide high activity and stability under bio-oil hydrodeoxygenation conditions has become one of the most pressing issues for the petrochemical industry.

energy & fuels,engineering, chemical,chemistry, physical, petroleum, organic
An overview of bio-oil upgrading with high hydrogen-containing feedstocks to produce transportation fuels: chemistry, catalysts, and engineering

Bing Wang,Rui Xiao,Huiyan Zhang

DOI: https://doi.org/10.2174/1385272823666190405145007

2019-01-01

Current Organic Chemistry

Abstract:As an alternative to increasingly depleted traditional petroleum fuel, bio-oil has many advantages: high energy density, flexibility, easy storage and transportation. Nevertheless, bio-oil also presents some unwanted characteristics such as high viscosity, acidity, oxygen content and chemical instability. The process of bio-oil upgrading is necessary before utilization as transportation fuels. In addition, the bio-oil has low effective hydrogen/carbon molar ratio (H/C-eff) which may lead to coke formation and hence deactivation of the catalyst during the upgrading process. Therefore, it seemed that co-refining of bio-oil with other higher hydrogen-containing feedstocks is necessary. This paper provides a broad review of the bio-oil upgrading with high hydrogen-containing feedstocks to produce transportation fuels: chemistry, catalyst, and engineering research aspects were discussed. The different thermochemical conversion routes to produce bio-oil and its physical-chemical properties are discussed firstly. Then the bio-oil upgrading research using traditional technologies and common catalysts that emerged in recent years are briefly reviewed. Furthermore, the applications of high H/C-eff feedstock to produce high-quality of bio-oil are also discussed. Moreover, the emphasis is placed on co-refining technologies to produce transportation fuels. The processes of co-refining bio-oil and vacuum gas oil in fluid catalytic cracking (FCC) unit for transportation fuels from laboratory scale to pilot scale are also covered in this review. Co-refining technology makes it possible for commercial applications of bio-oil. Finally, some suggestions and prospects are put forward.
Upgrading of Bio-oil from Biomass Pyrolysis: Current Status and Future Development

Quang Thang Trinh,Arghya Banerjee,Khursheed B. Ansari,Duy Quang Dao,Asmaa Drif,Nguyen Thanh Binh,Dang Thanh Tung,Phan Minh Quoc Binh,Prince Nana Amaniampong,Pham Thanh Huyen,Minh Thang Le

DOI: https://doi.org/10.1007/978-981-15-1804-1_14

2020-01-01

Abstract:For the sustainable production of fuel, biomass pyrolysis processes have appeared as a promising alternative for the efficient utilization of biomass. The liquid product obtained from biomass pyrolysis, i.e., bio-oil has a very complex composition including large proportion of organic oxygenated hydrocarbon compounds and appreciable amount of water. The high oxygen content of the bio-oil creates many major drawbacks that hinder its vast application. The quality of bio-oil is not applicable for direct transportation purposes, and its upgrading is mandatory before it can be used practically in power engines. The abovementioned drawbacks can be overcome by the catalytic hydrodeoxygenation of bio-oil, in which the functional groups containing oxygen are removed and replaced by hydrogen atoms. For this purpose of selectively activating and breaking the C–O bonds while trying to maintain the C–C bonds intact, processing knowledge base of petroleum industry may not be utilized for hydrodeoxygenation of bio-oil. Therefore, novel catalysts, solvents, and processes need to be developed. This chapter reviews the state-of-the-art results obtained from the research and development of these technologies. The pros and cons, potential of future applications, challenges related to these technologies, and opportunities to maximize economic and environmental benefits while minimizing pollution are highlighted. Besides, the application of molecular modeling in the integration with experiment is highlighted in this chapter as a new paradigm for mechanistic studies, which could open new avenues to design and develop catalysts for a plethora of bio-oil upgrading processes that require high activity and selectivity. Finally, the breakthrough applications of novel sonochemical technique in biomass treatment and conversion are introduced in this chapter.

A review of hydrodeoxygenation of bio-oil: model compounds, catalysts, and equipment

Dilemma and Strategies for Production of Diesel-Like Hydrocarbons by Deoxygenation of Biomass-Derived Fatty Acids

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Research Advances of Catalysts for the Hydrodeoxygenation of Oxygenic Compounds

Advances in hydrodeoxygenation catalysts for upgrading bio-oils

A Review on Recent Advances in Clean Microalgal Bio-Oil Production Via Catalytic Hydrothermal Deoxygenation

An Overview on Catalytic Hydrodeoxygenation of Pyrolysis Oil and Its Model Compounds

Advances and Perspectives of Bio-oil Hydrotreatment for Biofuel Production

Selective hydrodeoxygenation of bio-oil model compounds and mixtures over CuCoO x catalysts under mild conditions

Hydrodeoxygenation of lignin-derived bio-oil using molecular sieves supported metal catalysts: A critical review

Overview on Hydrogen Production by Upgrading of Water Soluble Fractions in Bio-Oil

Recent progress on upgrading of bio-oil to hydrocarbons over metal/zeolite bifunctional catalysts

Recent Progress in Hydrodeoxygenation of Biomass-based Oxygenates

Recent advances on catalytic deoxygenation upgrading of liquefaction microalgae bio oil

Upgrading technologies and catalytic mechanisms for heteroatomic compounds from bio-oil-A review

A Review of Bio-Oil Production from Hydrothermal Liquefaction of Algae

Minireview on Bio-Oil Upgrading via Electrocatalytic Hydrogenation: Connecting Biofuel Production with Renewable Power

Upgrading of Bio‐Oil Model Compounds and Bio‐Crude into Biofuel by Electrocatalysis: A Review

Hydrotreating of Lignocellulosic Bio-Oil (A Review)

An overview of bio-oil upgrading with high hydrogen-containing feedstocks to produce transportation fuels: chemistry, catalysts, and engineering

Upgrading of Bio-oil from Biomass Pyrolysis: Current Status and Future Development