Abstract:Ce0.8Sm0.2O2-delta (SDC), BaZr0.1Ce0.7Y0.2O3-delta (BZCY) powders are mechanically mixed with Smo.sSro.sC003_,s (SSC) powders to prepare triple-phase SSC-xSDC-(0.3 - x) BZCY (x = 0.1, 0.15, 0.2) composite cathode materials for proton-conducting solid oxide fuel cells (H-SOFCs). The SSC, SDC and BZCY powders are all synthesized via aqueous gelcasting method. Chemical compatibility, sinterability, microstructure, linear thermal expansion coefficients, electrical conductivity and electrochemical performance of the composite cathode materials are investigated and compared with single phase SSC and dual-phase SSC-0.3BZCY composite cathode materials. The results reveal that there have no observable chemical reactions among SSC. SDC and BZCY after co-firing the powder mixes at 1100 degrees C for 3 h. Adding SDC and BZCY into SSC material decreases open porosity, increases the shrinkage rate of the sintered SSC materials and significantly reduces thermal expansion mismatch between BZCY and SSC materials. Electrical conductivity of the triple-phase composite cathode samples ranges from about 130.8S cm(-1) to 342.3 S cm(-1) at temperature 450-800 degrees C, and increases as SDC content increases. Polarization resistances between the triple-phase composite cathode materials and the BZCY electrolyte decrease with increasing SDC content. The polarization resistance is significantly reduced from 1.57 Omega cm(2) for dual-phase SSC-0.3BZCY materials to 0.77 Omega cm(2) for triple-phase SSC-0.2SDC-0.1BZCY materials under open circuit conductions at 700 degrees C in air. The preliminary test results have suggested that triple-phase SSC-xSDC-(0.3 - x) BZCY (x= 0.1, 0.15, 0.2) materials may be a potential candidate of cathode material for H-SOFCs. (C) 2012 Elsevier B.V. All rights reserved.

Fabrication and Study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ Composite Cathode

Fabrication and Study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

High Performance La0.5(Ba0.2Sr0.2Ca0.1)Co0.8Fe0.2O3-δ- BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Preparation and Characterization of Ba0.5Sr0.5Fe0.9Ni0.1O3−δ–Sm0.2Ce0.8O1.9 Compose Cathode for Proton-Conducting Solid Oxide Fuel Cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

La0.7Sr0.3FeO3−δ Composite Cathode Enhanced by Sm0.5Sr0.5CoO3−δ Impregnation for Proton Conducting SOFCs

Investigation and Study of Three Different Composite Cathodes for Proton-Conducting Solid Oxide Fuel Cells

Development of A Novel Type of Composite Cathode Material for Proton-Conducting Solid Oxide Fuel Cells

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design

A Cobalt-Free Sm0.5Sr0.5FeO3−δ–BaZr0.1Ce0.7Y0.2O3−δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Nano-sized Sm0.5Sr0.5CoO3-δ as the cathode for solid oxide fuel cells with proton-conducting electrolytes of BaCe0.8Sm0.2O2.9

(La, Pr)0.8Sr0.2FeO3−–Sm0.2Ce0.8O2− Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

A Cobalt-Free Sm0.5Sr0.5Fe0.8Cu0.2O3−δ–Ce0.8Sm0.2O2−δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Investigation on a Novel Composite Solid Oxide Fuel Cell Anode with La0.6Sr0.4Co0.2Fe0.8O3−δ Derived Phases

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode

Enhancement of Electrochemical Performance for Proton Conductive Solid Oxide Fuel Cell by 30%GDC-LSCF Cathode

Optimization of La0.6Sr0.4Co0.2Fe0.8O3-α - Ba(Ce0.6Zr0.4)0.9Y0.1O3-δ cathode composition for proton ceramic fuel cell application

Novel Triple-Phase Composite Cathode Materials for Proton-Conducting Solid Oxide Fuel Cells

Application of Ba0.5Sr0.5FeO3−δ-NdMnO3−δ Composite Cathode in Proton-Conducting Solid Oxide Fuel Cells

A novel BaFe<sub>0.8</sub>Zn<sub>0.1</sub>Bi<sub>0.1</sub>O<sub>3-</sub> cathode for proton conducting solid oxide fuel cells

Evaluation of SrSc0.175Nb0.025Co0.8O3-δ Perovskite As a Cathode for Proton-Conducting Solid Oxide Fuel Cells: the Possibility of in Situ Creating Protonic Conductivity and Electrochemical Performance