Abstract:Ce0.8Sm0.2O2-delta (SDC), BaZr0.1Ce0.7Y0.2O3-delta (BZCY) powders are mechanically mixed with Smo.sSro.sC003_,s (SSC) powders to prepare triple-phase SSC-xSDC-(0.3 - x) BZCY (x = 0.1, 0.15, 0.2) composite cathode materials for proton-conducting solid oxide fuel cells (H-SOFCs). The SSC, SDC and BZCY powders are all synthesized via aqueous gelcasting method. Chemical compatibility, sinterability, microstructure, linear thermal expansion coefficients, electrical conductivity and electrochemical performance of the composite cathode materials are investigated and compared with single phase SSC and dual-phase SSC-0.3BZCY composite cathode materials. The results reveal that there have no observable chemical reactions among SSC. SDC and BZCY after co-firing the powder mixes at 1100 degrees C for 3 h. Adding SDC and BZCY into SSC material decreases open porosity, increases the shrinkage rate of the sintered SSC materials and significantly reduces thermal expansion mismatch between BZCY and SSC materials. Electrical conductivity of the triple-phase composite cathode samples ranges from about 130.8S cm(-1) to 342.3 S cm(-1) at temperature 450-800 degrees C, and increases as SDC content increases. Polarization resistances between the triple-phase composite cathode materials and the BZCY electrolyte decrease with increasing SDC content. The polarization resistance is significantly reduced from 1.57 Omega cm(2) for dual-phase SSC-0.3BZCY materials to 0.77 Omega cm(2) for triple-phase SSC-0.2SDC-0.1BZCY materials under open circuit conductions at 700 degrees C in air. The preliminary test results have suggested that triple-phase SSC-xSDC-(0.3 - x) BZCY (x= 0.1, 0.15, 0.2) materials may be a potential candidate of cathode material for H-SOFCs. (C) 2012 Elsevier B.V. All rights reserved.

Investigation and Study of Three Different Composite Cathodes for Proton-Conducting Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Fabrication and Study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design

Fabrication and Study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ Composite Cathode

Development of A Novel Type of Composite Cathode Material for Proton-Conducting Solid Oxide Fuel Cells

High Performance La0.5(Ba0.2Sr0.2Ca0.1)Co0.8Fe0.2O3-δ- BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Enhancement of Electrochemical Performance for Proton Conductive Solid Oxide Fuel Cell by 30%GDC-LSCF Cathode

Investigation on a Novel Composite Solid Oxide Fuel Cell Anode with La0.6Sr0.4Co0.2Fe0.8O3−δ Derived Phases

A New Bi-Directional Surface Modification Cathode Based on Conventional Cathode La0.6Sr0.4Co0.2Fe0.8O3-δ

Proton-Blocking Composite Cathode for Proton-Conducting Solid Oxide Fuel Cell

Performance and distribution of relaxation times analysis of Ruddlesden-Popper oxide Sr3Fe1.3Co0.2Mo0.5O7-δ as a potential cathode for protonic solid oxide fuel cells

Performance Optimization for Proton Conducting SOFCs by Impregnating Triple-Conducting NBSCF to Form Composite Cathode

Novel Triple-Phase Composite Cathode Materials for Proton-Conducting Solid Oxide Fuel Cells

A Cobalt-Free Sm0.5Sr0.5FeO3−δ–BaZr0.1Ce0.7Y0.2O3−δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Optimization of La0.6Sr0.4Co0.2Fe0.8O3-α - Ba(Ce0.6Zr0.4)0.9Y0.1O3-δ cathode composition for proton ceramic fuel cell application

A New Composite Material Ca3co4o9+Delta+La0.7sr0.3coo3 Developed For Intermediate-Temperature Sofc Cathode

A comparative study on the composite cathodes with proton conductor and oxygen ion conductor for proton-conducting solid oxide fuel cell

A Highly Active Hybrid Catalyst Modified (La0.60sr0.40)0.95co0.20fe0.80o3-Δ Cathode for Proton Conducting Solid Oxide Fuel Cells

(La, Pr)0.8Sr0.2FeO3−–Sm0.2Ce0.8O2− Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

La0.7Sr0.3FeO3−δ Composite Cathode Enhanced by Sm0.5Sr0.5CoO3−δ Impregnation for Proton Conducting SOFCs