Nano-sized Sm0.5Sr0.5CoO3-δ as the cathode for solid oxide fuel cells with proton-conducting electrolytes of BaCe0.8Sm0.2O2.9

Tianzhi Wu,Yingqi Zhao,Ranran Peng,Changrong Xia

DOI: https://doi.org/10.1016/j.electacta.2009.04.013

IF: 6.6

2009-01-01

Electrochimica Acta

Abstract:Nano-sized Sm0.5Sr0.5CoO3−δ (SSC) was fabricated onto the inner face of porous BaCe0.8Sm0.2O2.9 (BCS) backbone by ion impregnation technique to form a composite cathode for solid oxide fuel cells (SOFCs) with BCS, a proton conductor, as electrolyte. The electro-performance of the composite cathodes was investigated as function of fabricating conditions, and the lowest polarization resistance, about 0.21Ωcm2 at 600°C, was achieved with BCS backbone sintered at 1100°C, SSC layer fired at 800°C, and SSC loading of 55wt.%. Impedance spectra of the composite cathodes consisted of two depressed arcs with peak frequency of 1kHz and 30Hz, respectively, which might correspond to the migration of proton and the dissociative adsorption and diffusion of oxygen, respectively. There was an additional arc peaking at 1Hz in the Nyquist plots of a single cell, which should correspond to the anode reactions. With electrolyte about 70μm in thickness, the simulated anode, cathode and bulk resistances of cells were 0.021, 0.055 and 0.68Ωcm2 at 700°C, relatively, and the maximum power density was 307mWcm−2 at 700°C.