Abstract:Thermochemical energy storage (TCES) by means of reversible chemical reactions represents a promising strategy for harnessing renewable energy and recovering industrial waste heat. In this work, alkali metal nitrate promoted MgO composites were synthesized, and the MgO–CO2 working pair was suggested as an alternative candidate for harvesting intermediate-temperature industrial waste heat. However, it remains unclear how operating parameters would affect the heat storage density, and the long-term cycling stability of the alkali metal nitrate promoted MgO composites under harsh conditions close to practical application scenarios needs to be clarified. The objectives of this work are to expound the effects of operating parameters on TCES performance and to evaluate the long-term cycling stability of the alkali metal nitrate promoted MgO composites. With increasing NaNO3 content, the heat storage density of NaNO3–MgO increases dramatically first and then exhibits no significant change. With rising carbonation temperature, the heat storage density of the 10NaNO3–MgO composite increases first and then declines marginally, while it increases with the increasing CO2 partial pressure. Doping alkali metal nitrate eutectic mixtures adversely affects the heat storage density. 10NaNO3–MgO exhibits a high heat storage density of 2291 kJ/kg at 340 °C in 100% CO2. The 10NaNO3–MgO and 10(K–Na)NO3–MgO composites suffer a significant decline in heat storage density within 10 consecutive cycles, while 10(Li–Na)NO3–MgO retains good stability with a slight decrease of heat storage density from 1073 to 770 kJ/kg in 50% CO2. The desired 10(Li–Na)NO3–MgO is suggested as a promising material for TCES application.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01681.Figure S1. EDS spectra of the 10(K–Na)NO3–MgO and 10(Li–Na)NO3–MgO composites. Figure S2. CO2 sorption rates of MgO and the NaNO3 promoted MgO composites. Figure S3. CO2 sorption rates of 10NaNO3–MgO tested under different carbonation temperatures. Figure S4. CO2 sorption rates of 10NaNO3–MgO tested under different CO2 partial pressures. Figure S5. CO2 sorption rates of the alkali metal nitrates eutectic mixtures promoted MgO composites. Figure S6. CO2 sorption rates of (a) the 10NaNO3–MgO and (b) the 10(Li–Na)NO3–MgO composites in multiple cycles (PDF)This article has not yet been cited by other publications.

Enhanced Mechanism of Molten Alkali Nitrates on Triple-Phase Interface During the Carbonation of MgO

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Alkali Metal Nitrates Promoted MgO Composites with High CO 2 Uptake for Thermochemical Energy Storage

Unravelling the Mechanism of Intermediate‐Temperature CO 2 Interaction with Molten‐NaNO 3 ‐Salt‐Promoted MgO

Insights into Nickel-Based Dual Function Materials for CO2 Sorption and Methanation: Effect of Reduction Temperature

Mesoporous MgO Promoted with NaNO3/NaNO2 for Rapid and High-Capacity CO2 Capture at Moderate Temperatures

Molten salt-promoted MgO-based CO 2 adsorbents: Selective adsorption on polycrystalline surfaces

CO2 Adsorption Performance of Na/K-Impregnated MgO

Molten Salt-Promoted MgO Adsorbents for CO 2 Capture: Transient Kinetic Studies

Unveiling the dynamic CO2 capture performance of MgO promoted with molten salts and CaCO3 via fixed bed reactor experiments

Probing the dynamics of the local structure of Na in NaNO3-promoted, MgO-based CO2 sorbents via X-ray absorption spectroscopy

Enhanced mineral carbonation on surface functionalized MgO derived from mine tailings

Exploring Mechanisms of Hydration and Carbonation of MgO and Mg(OH)2 in Reactive Magnesium Oxide-based Cements

MgO promoted by Fe2O3 and nitrate molten salt for fast and enhanced CO2 capture: Experimental and DFT investigation

Unravelling the pore templating effect on CO2 adsorption performance of alkali metal nitrates promoted MgO pellets

Roles for K2CO3 Doping on Elevated Temperature CO2 Adsorption of Potassium Promoted Layered Double Oxides

Synthesis of hollow Al-doped MgO spheres via a sacrificial templating method for enhanced CO2 adsorption