Abstract:Optimization of MgO adsorbents is predominantly focused on the regulation of appropriate adsorption sites for CO2 associated with Mg2+-O2– sites of low coordination. Here, for the first time, we conducted transient kinetic experiments to identify and characterize changes of the CO2 molecular path in MgO-based CO2 adsorbents upon the addition of molten salt modifiers. Among the optimized samples, addition of 10 mol % NaNO2 on the surface of MgO exhibited the highest CO2 uptake (15.7 mmol g–1) at 350 °C compared to less than 0.1 mmol g–1 for the unpromoted MgO. Kinetic modeling showed that the interaction of molten salt-promoted MgO with CO2 at 300 °C involves three different processes, namely, fast surface adsorption associated with surface-active basic sites, chemical reaction associated with MgCO3 formation, and a slow diffusion step being the rate-limiting step of the carbonation process. Furthermore, transient kinetic studies coupled with mass spectrometry under low CO2 partial pressure agreed well with the kinetic simulation results based on TGA measurements, demonstrating an in-depth understanding of the CO2-capturing performance gained and its considerable significance for future practical designs of precombustion CO2 capture.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c08731?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c08731</a>.Synthesis and characterization of MgO-based CO2 adsorbents; SSA of NaNO2/ NaNO3-coated MgO adsorbents; CO2 uptakes of molten salt-promoted MgO adsorbents; standard thermodynamic data; kinetic parameters of molten salt-promoted MgO adsorbents; XRD of MgO-based adsorbents; CO2 uptakes over repeated cycles; dynamic variations; and dimensionless transient CO2 adsorption response curves (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c08731/suppl_file/es0c08731_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Molten salt-promoted MgO-based CO 2 adsorbents: Selective adsorption on polycrystalline surfaces

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Molten Salt-Promoted MgO Adsorbents for CO 2 Capture: Transient Kinetic Studies

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

Properties of a Nano CaO/Al2O3 CO2 Sorbent

MgO promoted by Fe2O3 and nitrate molten salt for fast and enhanced CO2 capture: Experimental and DFT investigation

CO2 Adsorption Performance of Na/K-Impregnated MgO

Unravelling the Mechanism of Intermediate‐Temperature CO 2 Interaction with Molten‐NaNO 3 ‐Salt‐Promoted MgO

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Mesoporous MgO Promoted with NaNO3/NaNO2 for Rapid and High-Capacity CO2 Capture at Moderate Temperatures

Research on CO2 Adsorption Performances of Metal-Doped (ca, Fe and Al) MgO

Efficient MgO-doped CaO sorbent pellets for high temperature CO2 capture

Unravelling the pore templating effect on CO2 adsorption performance of alkali metal nitrates promoted MgO pellets

Synthesis of hollow Al-doped MgO spheres via a sacrificial templating method for enhanced CO2 adsorption

An investigation of CO2 adsorption kinetics on porous magnesium oxide

Synthesis of Alkali Metals Functionalized Porous Carbon for Enhanced Selective Adsorption of Carbon Dioxide: A Theoretically Guided Study

Unveiling the dynamic CO2 capture performance of MgO promoted with molten salts and CaCO3 via fixed bed reactor experiments

Strengthened CO2 Adsorption over Ce/Al-promoted MgO for Fast Capture