Abstract:CO 2 capture using alkali metal salt (AMS)-promoted MgO-based sorbents at intermediate temperatures (300 – 500 °C) has gained increased interest recently. The prospects of such materials for CO 2 capture were assessed in this work. We investigated the most reactive MgO-based sorbents that have been reported in the literature, i.e., MgO promoted with a combination of various AMS (incl. NaNO 3 , LiNO 3 , K 2 CO 3 and Na 2 CO 3 ), and examined how particle size (from powder to pelletized 500 μm particles) and reaction conditions (calcination/carbonation temperature, and partial pressure of CO 2 ) affect the cyclic CO 2 uptake using a thermogravimetric analyzer (TGA) at ambient pressure. The TGA results showed that the CO 2 uptake of the sorbents decreased significantly after pelletization, losing 74 % of its initial capacity. However, the CO 2 uptake capacity of the pelletized sorbents continued to increase over 100 cycles and reached a value (~ 0.46 g CO2 /g sorbent ) close to that of the powdery sample (~ 0.53 g CO2 /g sorbent ). Analysis via X-ray diffraction (XRD), inductively coupled plasma optical emission spectroscopy (ICP-OES), scanning electron microscope (SEM) and N 2 physisorption suggests that the increase in CO 2 uptake was related to a change of the nature of the alkali species within the molten phase that is reflected by their re-crystallization behavior when cooling them down to room temperature, and appeared to be affected by the CO 2 partial pressure present during carbonation. Finally, the CO 2 capture performance of the best-performing sorbents was evaluated in a packed bed reactor, in order to assess whether the most reactive sorbents are capable of removing a significant amount of CO 2 from a gas stream at ambient pressure. The CO 2 uptake of the sorbents in the packed bed experiments was very close to that in the TGA experiments; however, the CO 2 capture efficiency was less than 10 %, which currently appears too low for an industrial post-combustion CO 2 capture process to be viable. New material developments should not only focus on improving the rate of formation of MgCO 3 from MgO, but also assess whether CO 2 removal with such sorbents is actually feasible.

Unveiling the dynamic CO2 capture performance of MgO promoted with molten salts and CaCO3 via fixed bed reactor experiments

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Assessment of the Effect of Process Conditions and Material Characteristics of Alkali Metal Salt Promoted MgO-Based Sorbents on Their CO2 Capture Performance

Mesoporous MgO Promoted with NaNO3/NaNO2 for Rapid and High-Capacity CO2 Capture at Moderate Temperatures

Molten Salt-Promoted MgO Adsorbents for CO 2 Capture: Transient Kinetic Studies

MgO promoted by Fe2O3 and nitrate molten salt for fast and enhanced CO2 capture: Experimental and DFT investigation

Mesoporous MgO Enriched in Lewis Base Sites As Effective Catalysts for Efficient CO2 Capture

Ultrafast and Stable CO 2 Capture Using Alkali Metal Salt-Promoted MgO-CaCO 3 Sorbents.

Unravelling the Mechanism of Intermediate‐Temperature CO 2 Interaction with Molten‐NaNO 3 ‐Salt‐Promoted MgO

Characteristics of Alkali Nitrates Molten Salt-Promoted MgO As a Moderate-Temperature CO2 Absorbent

Enhanced CO2 Adsorption of MgO with Alkali Metal Nitrates and Carbonates

Fabrication Of A New Mgo/C Sorbent For Co2 Capture At Elevated Temperature

CO2 Adsorption Performance of Na/K-Impregnated MgO

Molten Salt Promoting Effect in Double Salt CO2 Absorbents

Ab Initio Thermodynamic Study of the CO2 Capture Properties of M2CO3 (M = Na, K)- and CaCO3-Promoted MgO Sorbents Towards Forming Double Salts

Progress in MgO sorbents for cyclic CO2 capture: a comprehensive review

Granulation of Alkaline Metal Nitrate Promoted MgO Adsorbents and the Low-Concentration CO2 Capture Performance in the Fixed Bed Adsorber

Promoting Effects of Li3PO4 and CaCO3 on the Intermediate-Temperature CO2 Adsorption over Molten NaNO3-promoted MgO-based Sorbents

CO2 Adsorption and Thermal Stability Improvement of MgO-SrO Composite Materials Assisted by Molten Nitrate at Medium Temperature