Abstract:In piezoelectric coupled shells, the distributed actuation force usually consists of four components, including the membrane force and bending moment in the longitudinal direction, and the membrane force and bending moment in the circumferential direction. For commonly used bi-axial piezoelectric materials, such as PZT and PVDF, these four components may have phase difference of pi or -pi. This leads to force cancellation and reduces the overall control effectiveness. Supposing that one piezoelectric actuator is uni-axial, for example only d(31) is not equal to zero, and then this actuator will generate actuation force with the first two components or the latter two, depending on the actuator configuration and the shell geometry/modes. Accordingly the force cancellation can be avoided or minimized. In this research, the Macro-Fiber Composite (MFC) actuators are used as uni-axial actuators. The dynamic equation of a conical shell is firstly given. Then the actuation force is derived based on the converse piezoelectric effect and thin shell assumptions. Three types of the MFC actuators are considered, including MF'C-P1, MFC-P2 and MFC-P3. Case studies are performed to evaluate the distributed actuation forces. Both axial and transverse vibrations of the conical shell are formulated to study the force cancellation of various shell modes, and the payload effects are considered in the analysis. The results show that, by using the MFC actuators, actuation force can be enhanced because force cancellation is avoided. The force enhancement becomes even more significant for membrane dominated modes, such as axial modes of shells with heavy payloads.

Vibro-acoustic Control of a Programmable Meta-Shell with Digital Piezoelectric Shunting

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Theoretical analysis of a multi-layered thin shell coupled with piezoelectric shell actuators for distributed vibration controls

Active Control of Nonlinear Piezoelectric Circular Shallow Spherical Shells

Vibration Control of Toroidal Shells with Parallel and Diagonal Piezoelectric Actuators

Electromechanics And Vibrations Of Piezoelectric Shell Distributed Systems

Control Force Enhancement Of Conical Shells Using Piezoelectric Macro-Fiber Composite

Nonlinear Piezo-Thermoelastic Shell Theory Applied to Control of Variable-Geometry Shells

Multi-resonant piezoelectric shunting induced by digital controllers for subwavelength elastic wave attenuation in smart metamaterial

Spatial Microscopic Actuations of Shallow Conical Shell Sections

Distributed Modal Identification and Vibration Control of Continua: Piezoelectric Finite Element Formulation and Analysis

Flexoelectric Actuation and Control of Conical Shells

Multi-mode Vibration Averagely Control for Cylindrical Shells by Optimally Distributed Piezoelectric Sensors and Actuators

Spatially Filtered Vibration Control of Cylindrical Shells

Distributed piezoelectric sensor/actuator design for dynamic measurement/control of distributed parameter systems: A piezoelectric finite element approach

Micro-Structronics and Control of Hybrid Electrostrictive/Piezoelectric Thin Shells

Distributed Orthogonal Filtering of Piezoelectric Shell Actuators

Distributed vibration control and identification of coupled elastic/piezoelectric shells: Theory and experiment

Spatially Distributed Orthogonal Piezoelectric Shell Actuators: Theory and Applications

Micro-Photodeformation Actions of Photostrictive Actuator Patches Applied to Vibration Control of Cylindrical Shells