Abstract:Direct air capture (DAC) has emerged as a promising tool to address the sizeable non-point sources of CO2 emissions. However, energy penalty of its regeneration process is extremely high due to the low CO2 concen-tration in the atmosphere. This paper aims to explore the potential of a temperature vacuum swing adsorption (TVSA) system for DAC which utilizes solar energy and condensation heat recovered from air conditioners. The effect of indoor environmental parameters especially for relative humidity (RH) is targeted for carbon removal processes. It demonstrates that 40% RH is the optimal value with regard to the minimum heat consumption of 12.16 MJ/kg. Then four representative cases with different energy supply methods for the regeneration pro-cesses, i.e., solar-assisted condensation heat recovery, solar energy, condensation heat, and electricity, are compared and analyzed in terms of techno-economic aspects to seek the best system configuration. The effects of various indoor environmental conditions, e.g., temperature, RH, and CO2 concentration are also counted. The results demonstrate that the levelized cost of DAC (LCOD) and the cost calculated via net present value (NPV) increase with the increased temperatures and the reduced CO2 partial pressure. Due to a tradeoff between the increased adsorption capacity and regeneration heat in the presence of water, a minimum value of economic performance could be obtained at 30% RH. It reveals a novel and cost-effective TVSA combined system for DAC, which may bring more merits to approach carbon mitigation shortly.

Direct Air Carbon Capture and Recovery Utilizing Alkaline Solution Circulation

Direct Air Capture Technology and Its Application

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

From Lab to Fab: Development and Deployment of Direct Air Capture of CO2

Direct Air Capture (DAC) for Achieving Net-Zero CO2 Emissions: Advances, Applications, and Challenges

Temperature-vacuum Swing Adsorption for Direct Air Capture by Using Low-Grade Heat

Distributed direct air capture of carbon dioxide by synergistic water harvesting

Sorption direct air capture with CO2 utilization

Research on Current and Future Aspects of Direct Air Capture of CO2

Direct air capture with amino acid solvent: Operational optimization using a crossflow air‐liquid contactor

Development of sorbent materials for direct air capture of CO2

Aqueous Electrochemical Direct Air Capture Using Alizarin Red S

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Making Direct Air Capture Affordable; Technology, Market and Regulatory Approaches

Solar-Powered Direct Air Capture: Techno-Economic and Environmental Assessment

Solar-assisted Temperature Vacuum Swing Adsorption for Direct Air Capture: Effect of Relative Humidity

Indoor CO2 direct air capture and utilization: Key strategies towards carbon neutrality

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO2.

Regeneration of direct air CO2 capture liquid via alternating electrocatalysis

Toward the feasible direct air capture of carbon dioxide with molecular sieves by water management

Membrane Separation Technology in Direct Air Capture