Abstract:Direct air capture (DAC) is an emerging negative CO2 emission technology that aims to introduce a feasible method for CO2 capture from the atmosphere. Unlike carbon capture from point sources, which deals with flue gas at high CO2 concentrations, carbon capture directly from the atmosphere has proved difficult due to the low CO2 concentration in ambient air. Current DAC technologies mainly consider sorbent-based systems; however, membrane technology can be considered a promising DAC approach since it provides several advantages, e.g., lower energy and operational costs, less environmental footprint, and more potential for small-scale ubiquitous installations. Several recent advancements in validating the feasibility of highly permeable gas separation membrane fabrication and system design show that membrane-based direct air capture (m-DAC) could be a complementary approach to sorbent-based DAC, e.g., as part of a hybrid system design that incorporates other DAC technologies (e.g., solvent or sorbent-based DAC). In this article, the ongoing research and DAC application attempts via membrane separation have been reviewed. The reported membrane materials that could potentially be used for m-DAC are summarized. In addition, the future direction of m-DAC development is discussed, which could provide perspective and encourage new researchers' further work in the field of m-DAC.

What problem does this paper attempt to address?

This paper aims to explore the application potential of membrane separation technology in Direct Air Capture (DAC). Specifically, the paper attempts to address the following issues: 1. **Challenge of Capturing Low - Concentration CO₂**: Different from capturing high - concentration CO₂ from point sources (such as flue gas emitted from coal - fired power plants), the main challenge of directly capturing CO₂ from the atmosphere is that the concentration of CO₂ in the atmosphere is extremely low (about 400 ppm), which leads to insufficient driving force for CO₂ to pass through the membrane and makes it difficult to achieve efficient capture. 2. **Limitations of Existing DAC Technologies**: Current DAC technologies mainly rely on adsorbent systems (such as solid adsorbents and liquid solvents). These technologies have problems such as high energy consumption, large environmental impact, and limited installation locations. Therefore, it is necessary to find a more environmentally - friendly and lower - cost technology to supplement or replace the existing adsorbent systems. 3. **Advantages and Feasibility of Membrane Separation Technology**: Membrane separation technology is considered a promising method for DAC due to its lower energy and operating costs, smaller environmental footprint, and suitability for small - scale distributed installations. By reviewing the latest research progress, the paper evaluates the feasibility and potential advantages of membrane separation technology in DAC. 4. **Selection and Optimization of Membrane Materials**: In order to improve the efficiency of membrane separation technology in DAC, it is necessary to develop membrane materials with high permeability and selectivity. The paper summarizes the latest progress in the preparation of high - permeability gas separation membrane materials and system design in recent years, and discusses the future development directions of m - DAC. In summary, the core issue of this paper is to explore the application potential of membrane separation technology in direct air capture, to address the limitations of existing DAC technologies, and to provide guidance for future research and development.

Membrane Separation Technology in Direct Air Capture

Understanding the performance of membrane for direct air capture of CO2

From Lab to Fab: Development and Deployment of Direct Air Capture of CO2

Membrane Processes for Direct Carbon Dioxide Capture From Air: Possibilities and Limitations

Direct Air Capture (DAC) for Achieving Net-Zero CO2 Emissions: Advances, Applications, and Challenges

Direct Air Capture Technology and Its Application

Research on Current and Future Aspects of Direct Air Capture of CO2

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Development of sorbent materials for direct air capture of CO2

Making Direct Air Capture Affordable; Technology, Market and Regulatory Approaches

Sorption direct air capture with CO2 utilization

Recent progress on direct air capture of carbon dioxide

Direct air capture multiscale modelling: From capture material optimization to process simulations

Research needs targeting direct air capture of carbon dioxide: Material & process performance characteristics under realistic environmental conditions

Advances in solid adsorbent materials for direct air capture of CO2

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Temperature-vacuum Swing Adsorption for Direct Air Capture by Using Low-Grade Heat

Recent advances in direct air capture by adsorption

Understandings on Design and Application for Direct Air Capture: from Advanced Sorbents to Thermal Cycles

Indoor CO2 direct air capture and utilization: Key strategies towards carbon neutrality

Direct air capture of CO2: from insights into the current and emerging approaches to future opportunities