Abstract:Parallel machining robots have the potentials of high precision and high flexibility. However, their pose-dependent vibration characteristics may cause accuracy problems during machining, which poses a great challenge to the vibration suppression. Multiple tuned mass dampers (MTMDs) are widely used to suppress the vibration, owing to their significant vibration suppressing effect, great robustness, and compact structure. In this paper, a parallel MTMD system is designed to mitigate the forced vibration of a parallel machining robot. The elasto-dynamic model of the parallel robot is established to identify the modes and natural frequencies of the robot, and the results show that the frequency of the resonant mode varies from 91.0 Hz to 128.1 Hz. Based on the structure and natural frequency scope of the robot, the MTMD system is designed to be a parallel configuration in two directions and the impedance model of the MTMD system is built. Considering the pose-dependent dynamics and compact inner space of parallel robots, a multi-objective optimization method for varied vibration characteristics is proposed based on the impedance model. In this method, the suppression amplitude, robustness, and compactness are the main concerns. In the structural design, small-sized polymer material springs and viscous fluid damping inside the mass blocks are used to compose the MTMD system. Therefore, wide-band vibration suppression is realized in narrow spaces. Finally, verification experiments are performed. Modal tests show that the amplitudes of the resonant modes are decreased by 38.8% along the X axis and 40.7% along the Y axis. Machining tests show that a 20%-30% reduction of the vibration in the feed direction, a 40%-50% reduction in the radial direction, a 48%-55% harmonics reduction at the natural frequency are achieved. Precise surface measurements show a 32% reduction in waviness and a 17% reduction in roughness. This study provides a new structural design and optimization method of MTMDs adapted to vibration suppression for parallel machining robots.

Machining vibration suppression of cantilever parts of aerospace structure using robot-assisted clamping system

Vibration Analysis and Suppression in Robotic Boring Process

Vibration Analysis and Suppression in Robotic Hole Chamfering Process

Dynamic Modeling and Vibration Suppression of Double Flexible Mechanical Arm System

Dynamic simulation and active vibration control design of an ultra-precision fly-cutting machine tool

Design of parallel multiple tuned mass dampers for the vibration suppression of a parallel machining robot

Vibration suppression of complex thin-walled workpiece based on magnetorheological fixture

A JOINT WEARABLE STRUCTURAL REINFORCING DEVICE FOR VIBRATION SUPPRESSION IN ROBOTIC MILLING

Vibration suppression of an industrial robot with AGV in drilling applications by configuration optimization

Machining fixture and deformation control of aero-engine thin-walled casing

Vibration Suppression of a Large Flexible Spacecraft for On-Orbit Operation

An Adaptive Fixture for Suppress Vibrations and Measuring Workpiece Deformation of Thin-Walled Casings

Controlling harmful milling vibration for robotic milling system based on the optimization of milling posture and spindle speed

Vibration characterization of a planar multi-degree-of-freedom industrial machine

Accurate Clamping Method of Multipoint Flexible Fixture for Large Complex Surface

Active vibration suppression for large space structure assembly: A distributed adaptive model predictive control approach

Vibration Compensation of an Extendable Variable-Stiffness Boom-Lift-Mounted Robot

Suppress Chatter in Milling of Thin-Walled Parts Via Fixture with Active Support

Vibration modelling analysis of defective parallel robots as machine tools for aerospace parts machining

Vibration Suppression Control of Free-Floating Space Robots with Flexible Appendages for Autonomous Target Capturing

Suppression in Any Configuration : A Versatile Coupling Improved Multi-Objective Manipulation Framework for Modular Active Vibration Isolation System