Abstract:Ships have become an important source of SO2 emission in coastal areas with the rapid development of maritime transport. It is of great significance to develop a marine scrubber for reducing SO2 emission of ships. In this study, numerical simulation of a full-scale marine spray scrubber is conducted to investigate two-phase flow pattern and SO2 absorption process in the scrubber. A desulfurization model based on seawater absorbent is coupled into the simulation, which considers the mass transfer between phases and seawater aqueous phase chemistry simultaneously. A distribution ring is introduced in the scrubber to enhance the desulfurization performance of the scrubber. The result of simulation shows that the distribution ring can optimize effectively the distribution of gas-liquid phases and enhance the SO2 absorption. Under vertical condition, the desulfurization efficiency could be promoted approximate 6% after installing a distribution ring. The inclined condition resulting from the ship swinging could lead to the uneven distribution of droplets and an obvious decrease (8.7%) of desulfurization efficiency, whereas the desulfurization performance of the scrubber could be ensured with a distribution ring installed even under an inclined condition. Finally, a spray scrubber design scheme has been developed and successfully applied in the exhaust gas cleaning system (EGCS) of a container ship. Test result shows the outlet average value of SO2/CO2 can be reduced to 3.55. Meanwhile, the consistency of test data and calculation result indicates the applicability of the numerical model established for the simulation and optimization of the scrubber in industrial applications also. Implications: EGCS is an effective method to reduce SO2 emission of marine industry. However, different from a land desulfurization tower, the application of a spray scrubber in EGCS faces more problems due to the different application scenarios and complex sea conditions (inclined condition resulting from ships swinging and so on) during sailing. In this work, a numerical model capable of investigating physical and chemical phenomena in the scrubber simultaneously is established, which can produce a great amount of data for the operation instruction of EGCS and the design and optimization of the marine spray scrubber. The distribution ring is introduced in the marine spray scrubber to intensify the SO2 absorption and enhance the desulfurization performance of the scrubber under different working conditions.

A New Device Combined with Naclo Solution to Simultaneously Remove So2 and Nox from the Marine Ships

Simultaneous Removal of SO2 and NO from the Flue Gas of Marine Ships with a Gas Cyclone–Liquid Jet Absorption Separator

Surface-modified Microbubbles (colloidal Gas Aphrons) for Nanoparticle Removal in a Continuous Bubble Generation-Flotation Separation System.

Simulation investigation on marine exhaust gas SO2 absorption by seawater scrubbing

A brand new two-phase wet oxidation absorption system for the simultaneous removal of SO2 and NOX from simulated marine exhaust gas

Application of Gas Cyclone-Liquid Jet Absorption Separator for Flue-Gas Desulfurization

Simulation of SO2 removal process from marine exhaust gas by hybrid exhaust gas cleaning systems (EGCS) using seawater and magnesium-based absorbent

Letter: Dehydrated test strip for the detection of yeasts.

Plasma technology to remove NOx from off-gases

Evaluation of a crossed fused renal ectopia in a paediatric patient using 99mTc-DMSA SPECT/CT.

Kinetics of Nitric Oxide Absorption from Flue Gas Using an Advanced Oxidation Process with Sodium Persulfate Solution

Nox removal from gas mixture intensified by rotating packed bed with NaClO2 preoxidation

Removal of NO and SO_2 from Flue Gas by Wet Scrubbing Using Aqueous NaClO Solution

Experience of bereaved relatives who granted or refused permission for organ donation.

Membrane processes used to treat scrubber gas desulfuration washwater

A Superior Liquid Phase Catalyst for Enhanced Absorption of NO2 Together with SO2 after Low Temperature Ozone Oxidation for Flue Gas Treatment

Combined removal experiment of NOx, SO2 and PM from marine diesel exhaust gas with SCR-DryEGCS system

Oxidation and absorption of SO2 and NOx by MgO/Na2S2O8 solution at the presence of Cl−

Study on Ship Exhaust Gas Denitrification Technology Based on Vapor-Phase Oxidation and Liquid-Phase Impingement Absorption

Ship tail gas purification device

Simultaneous Removal Of So2 And Nox From Flue Gas Using Acidic Naclo2/Naclo3 Solution