Abstract:Laser irradiation is a popular method to produce microtextures on metal surfaces. However, the common laser-produced microtextures were hierarchical (multiscale), which may limit their applicability. In this paper, a method of two-step laser irradiation, combining first-step strong ablation and sequentially second-step gentle ablation, was presented to produce micron-rough surface with single-scale microtextures. The effect of laser fluence on the Ti–6Al–4V surface morphology and wettability were investigated in detail. The morphology results revealed that the microtextures produced using this method gradually evolved from multiscale to single-scale meanwhile from microprotrusions to microholes with increasing the second-step laser fluence from 0.0 to 2.4 J/cm2. The wettability and EDS/XPS results indicated that attributing to the rich TiO2 content and micron roughness produced by laser irradiation, all the two-step laser-irradiated surfaces exhibited superhydrophilicity. In addition, after silanization, all these superhydrophilic surfaces immediately turned to be superhydrophobic with close water contact angles of 155–162°. However, due to the absence of nanotextures, the water-rolling angle on the superhydrophobic surfaces with single-scale microtextures distinctly larger than those with multiscale ones. Finally, using the two-step laser-irradiation method and assisted with silanization, multifunctional superhydrophobic Ti–6Al–4V surfaces were achieved, including self-cleaning, guiding of the water-rolling direction and anisotropic water-rolling angles (like the rice-leaf), etc.

Fabrication of nano-scale superhydrophobic surfaces on silicon substrates using direct laser interference patterns(DLIP)

Hierarchical Micro/Nanostructures with Anti-Reflection and Superhydrophobicity on the Silicon Surface Fabricated by Femtosecond Laser

Fabrication of nanostructured hydrophobic surfaces with laser interference lithography

A Superhydrophilic Silicon Surface Enhanced by Multiscale Hierarchical Structures Fabricated by Laser Direct Writing

Superhydrophobic Surfaces with Micro-/Nano-structures Prepared by Femtosecond Laser

Controllable fabrication of periodic arrays of high-aspect-ratio micro-nano hierarchical structures and their superhydrophobicity

Superhydrophobic Surfaces Prepared by Microstructuring of Silicon Using a Femtosecond Laser.

Water Transport Control on A Patterned Superhydrophobic Surface Via Laser Direct Writing

Fabrication of Nanostructures by Laser Optical Focusing

Fabrication of Transferable and Micro/Nanostructured Superhydrophobic Surfaces Using Demolding and iCVD Processes

Laser Interference Fabrication of Large-Area Functional Periodic Structure Surface

Surface Nano-fabrication by Laser Precision Engineering

Laser Interference Lithography-A Method for the Fabrication of Controlled Periodic Structures

Droplet Manipulation of Hierarchical Steel Surfaces Using Femtosecond Laser Fabrication

Fabrication of Superhydrophobic Ti–6Al–4V Surfaces with Single-Scale Micotextures by using Two-Step Laser Irradiation and Silanization

Bioinspired Superhydrophobic Surfaces via Laser-Structuring

Forming Mechanisms and Wettability of Double-Scale Structures Fabricated by Femtosecond Laser

Fabrication of highly homogeneous and controllable nanogratings on silicon via chemical etching-assisted femtosecond laser modification

Femtosecond Laser Weaving Superhydrophobic Patterned PDMS Surfaces with Tunable Adhesion

Surface topography by water jet-guided laser texturing on wettability of monocrystalline silicon