Abstract:In this study, two types of blended alloys were processed by plasma transferred arc (PTA) hardfacing to form coatings. In the first case, a pre-alloyed Cu-Sn alloy and a pre-alloyed Co-base alloy were blended at a weight ratio of 85:15 (Cu-Sn/Co-base). In the second case, the pre-alloyed Cu-Sn and Co-base alloys were mixed with the molybdenum (Mo) element at a weight ratio of 81:15:4 (Cu-Sn/Co-base/Mo). Metastable liquid phase separation formed in the Cu-Sn/Co-base and Cu-Sn/Co-base/Mo coatings. The Co-rich spheroids as the minor precipitating alloy particles distributed on the Cu-rich matrix. The Co-rich spheroids consisted of α(Co) and M7C3 phases, and the Cu-rich matrix included α(Cu, Sn) and Cu10Sn3 phases. The relative content of α(Co)+M7C3 phases in the Cu-Sn/Co-base/Mo coating was higher than that in the Cu-Sn/Co-base coating. The numbers of the Co-rich spheroids in the cross section of the Cu-Sn/Co-base coating increased with increasing the distance from the substrate, and an obvious macroscopic segregation could be found in the coating close to its substrate. When Mo as additive was further added, the numbers of the Co-rich spheroids in the cross section of the coating increased and the macroscopic segregation could not be seen when compared to that in the Cu-Sn/Co-base coating. The wear rate of the Cu-Sn/Co-base and Cu-Sn/Co-base/Mo coatings was lower than that of the Cu-Sn coating, and a distinct improvement of the wear rate could be obtained in the Cu-Su/Co-base/Mo coating, attributing to mainly the increasing hardness of the coatings by sequence of the Cu-Sn coating, Cu-Sn/Co-base coating, and Cu-Sn/Co-base/Mo coating. The friction coefficient of the coatings has an increasing trend by sequence of the Cu-Sn coating, Cu-Sn/Co-base coating, and Cu-Sn/Co-base/Mo coating, but an obvious difference could not be seen in the coatings.

Demixing of Solid-Soluted Co–Pd Binary Alloy Induced by Microwave Plasma Hydrogen Irradiation Technique

Demixing of Solid-Soluted Co-Pd Binary Alloy Induced by Microwave Plasma Hydrogen Irradiation Technique

Encapsulation of Segmented Pd-Co Nanocomposites into Vertically Aligned Carbon Nanotubes by Plasma-Hydrogen-Induced Demixing

Complex phase separation of ternary Co-Cu-Pb alloy under containerless processing condition

Unveiling the True Micro-Structure in PdRu Immiscible Alloys and Its Application in Alkaline Hydrogen Evolution Reaction

The Formation Mechanism of Cu–Pd Alloys in Mixed Aqueous Solutions by Γ-Irradiation

Investigation of Mixing Co in Ultra-Thin NiPt Silicide Films

Investigation of Pt-Dy Co-Doping Effects on Isothermal Oxidation Behavior of (Co,ni)-Based Alloy

Liquid Phase Separation Microstructure and Properties of Mixed Cu-Sn and Co-Base Alloys Without or with Molybdenum Addition Processed by Plasma Transferred Arc Hardfacing

Highly Dispersed Pd on Co–B Amorphous Alloy: Facile Synthesis Via Galvanic Replacement Reaction and Synergetic Effect Between Pd and Co

Microstructure determination of PdRu immiscible alloys based on electron-pair distribution function and local elemental segregation

Effects of Additive Pd on the Structures and Electrochemical Hydrogen Storage Properties of Mg67Co33-based Composites or Alloys with BCC Phase

Revealing the dynamics of the alloying and segregation of Pt-Co nanoparticles via in-situ environmental transmission electron microscopy

Influences of Ultrasonic Irradiation on the Morphology and Structure of Nanoporous Co Nanoparticles During Chemical Dealloying

A Nanoporous Composite by Dealloying Rapidly Quenched Co75pd20si5

Modulating Surface Composition and Oxygen Reduction Reaction Activities of Pt–Ni Octahedral Nanoparticles by Microwave-Enhanced Surface Diffusion During Solvothermal Synthesis

Dispersed Pd/alumina catalyst with finite iodine entry for boosted CO purification and dimethyl carbonate synthesis

Plasma-assisted Fluidized-Bed Atomic Layer Deposition of Pd-Cu Nanoparticles on Porous Powder for CO2 Hydrogenation

Hydrogen storage and stability properties of Pd-Pt solid-solution nanoparticles revealed via atomic and electronic structure

Mechanical alloying induced solid state reaction and formation of nano-phase composite hydrogen storage alloys in MmNi5-x(Co, Al, Mn)x/Mg system

Temperature-driven phase transformation and element segregation in Pd-Ru immiscible alloy nanoparticles: Spatial resolving of elements and insights for electrocatalysis