Abstract:The integrated gate commutated thyristor (IGCT) is promising in dc grids nowadays. However, to meet the increasing demands for handling high fault currents, the turn-off capability of IGCT still needs to be optimized, which is affected by transient turn-off current redistribution significantly. This article proposes an experiment method based on an isolated anode design for detecting the turn-off current redistribution characteristics of IGCT. Influences of ON-state current density and commutation impedance distribution on IGCT's turn-off current redistribution characteristics are explored in detail. The results show that when IGCT's turn-off process satisfies the "hard" gate drive condition, the anode current redistribution gets changed mainly in the current commutation period and the anode voltage rising period of the turn-off process, before IGCT's dynamic avalanche phenomenon happens. Though the anode current distribution experiences large fluctuations during the commutation period, it will achieve a new balancing state at the end of this period, which almost does not affect the following periods. When IGCT goes into the anode voltage rising period, the ON-state current density distribution will affect the turn-off current redistribution. Under the effects of carrier extraction speed differences, the current density distribution throughout the chip tends to reduce its initial difference, which leads to the phenomenon of "current self-balancing." Meanwhile, the region with the highest ON-state current density dominates the anode voltage's building-up speed. To increase IGCT's turn-off capability, improving the ON-state anode current density uniformity utilizing an optimized layout or cell structure is one of the effective methods.

Reverse Blocking IGCT Optimized for Medium-Voltage Solid State Current Breaker by Proton Irradiation

Ultra-Low On-State Voltage IGCT for Solid-State DC Circuit Breaker with Single-Switching Attribute

Optimal Design of Reverse Blocking IGCT for Hybrid Line Commutated Converter

Abnormal Turn-ON Phenomenon of Large-Size and High-Voltage Reverse Blocking IGCT

A One-Dimensional Physics-Based Compact Model of Reverse Blocking IGCT Devices

Optimum Design of 1.4kv Non-Punch-Through Trench Igbts: the Next Generation of High-Power Switching Devices

A Novel Mixture Solid-State Switch Based on IGCT with High Capacity and IGBT with High Turn-off Ability for Hybrid DC Breakers.

Optimum design of 1.4 kV trench IGBTs-the next generation of high power switching devices

An Experimental And Numerical Investigation Of Igbt Blocking Characteristics

Impact of proton-induced total ionizing dose effects on electrical characteristics and safe operating area of trench field-stop IGBT devices

A Novel Oscillating-Commutation Solid-State DC Breaker Based on Compound IGCTs

Voltage Balancing Optimization of Series-Connected Igbts in Solid-State Breaker by Using Driving Signal Adjustment Technique

1.4 kV, 25 A, PT and NPT trench IGBTs with optimum forward characteristics

A Novel Solid-state Circuit Breaker with Robust Breaking Capability and High Efficiency

Transient Current Balancing of Parallel IGCTs in 10-kV/10-kA Hybrid DC Circuit Breaker

Deciphering the Effect of Corrugated P-Base on Reverse Blocking IGCT

Study on Performance Optimization of IGCT Device for DC Circuit Breaker

Experimental Investigation on the Turn-Off Current Redistribution Characteristics of IGCT Based on an Isolated Anode Design

Low-Cost HVdc Circuit Breaker With High Current Breaking Capability Based on IGCTs

Enhancing Turn-off Performance in IGCT-Based High Power Applications—Part I: Anomalous High Current Turn-Off Mode and Safe Operating Area Expansion at Ultra-Low Voltage

Optimization of Operation Temperature of Gate Commutated Thyristors for Hybrid DC Breaker