Abstract:Catalytic decomposition of benzene was studied by using oxides of vanadium and tungsten supported on titanium oxide (TiO2) catalysts for effective reduction of emissions of toxic organic compounds from waste incineration. Experiments were conducted to evaluate the effects of the catalyst's composition, and operating conditions on benzene decomposition, and the relationship between molecular structures of catalysts and their activity was also investigated through replacing the conventional TiO2 catalyst support by nano-sized TiO2. Trace levels (1 and 10 ppm) of gaseous benzene were catalytically decomposed in a fixed-bed catalytic reactor with monolithic oxides of vanadium and tungsten supported on titanium oxide (V2O5-WO3/TiO2) catalysts under conditions simulating the cooling of waste incineration flue gas. On-line monitoring of trace benzene concentrations before and after the catalyst was achieved by means of resonance enhanced multiphoton ionization-time of flight mass spectrometry (REMPI-TOFMS). Catalysts were characterized by nitrogen adsorption, X-ray diffraction, energy dispersive X-ray spectroscopy, temperature-programmed reduction, and Raman spectroscopy. The effects of several parameters, including catalyst operating temperature, space velocity (SV) and initial benzene concentration, on catalytic oxidation of benzene were investigated. Experimental results indicate that reduction of the initial benzene concentration from 10 to 1 ppm either enhances or decreases the catalytic removal efficiency depending on the adsorption capability as well as the oxidation ability of the catalyst tested. The catalytic activity for benzene oxidation not simply relies on the vanadium content of the catalyst; the molecular structure of vanadium oxide, which is known to be influenced by both vanadium oxide loading and the type of support, is very important. Nano-sized TiO2 supported vanadium oxide catalyst (VWNT) with lowest V loading (0.75 wt.%) provides higher catalytic activity than those of the catalysts with higher V contents (1.31 and 2.92 wt.%) but supported by conventional TiO2 (VWT1 and VWT2). The relatively higher catalytic activity of VWNT may be attributed to: (a) the presence of monomeric VOx species, with one terminal V=O bond as indicated by Raman spectra; (b) fewer impurities confounding active catalytic constituents (V, W and Ti); (c) pure anatase phase of TiO2 rather than a mixture phase of anatase and rutile servicing as catalyst support besides its nano-scale particle size; (d) larger specific surface area, smaller average pore diameter, and narrower pore size distribution contribute higher adsorption ability for benzene. No obvious competition effect between NOx removal and benzene oxidation was observed in this study. Reaction rate constants and activation energies for benzene catalytic oxidation tested by the catalysts were calculated. Lower activation energy obtained from VWNT than those of the two catalysts further confirming the higher catalytic activity of VWNT. Published by Elsevier B.V.

Novel Development of VOx–CeOx–WOx/TiO2 Catalyst for Low-Temperature Catalytic Oxidation of Chloroaromatic Organics

Recent Advances in Catalysts for Toluene Elimination Via Catalytic Oxidation

Efficient Synergistic Catalysis of Chlorinated Aromatic Hydrocarbons and NOx over Novel Low-Temperature Catalysts: Nano-TiO2 Modification and Interaction Mechanism.

The Synergistic Catalysis of Chloroaromatic Organics and NOx over Monolithic Vanadium-Based Catalysts at Low Temperature

Implication of operation time on low-temperature catalytic oxidation of chloroaromatic organics over VO<sub>x</sub>/TiO<sub>2</sub> catalysts: Deactivation mechanism analysis

Challenging Design of Highly Active Pt/CeO2-TiO2/ZSM-5 Catalysts for VOCs Low-Temperature Removal

Mesoporous MnCeOx Solid Solutions for Low Temperature and Selective Oxidation of Hydrocarbons.

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

Study on the Decomposition of Trace Benzene over V2O5–WO3/TiO2-based Catalysts in Simulated Flue Gas

Elimination of PCDD/Fs over Commercial Honeycomb-Like Catalyst of V<sub>2</sub>O<sub>5</sub>-MoO<sub>3</sub>/TiO<sub>2</sub> at Low Temperature: From Laboratory Experiments to Field Study

Low-temperature SCR Activity and SO2 Deactivation Mechanism of Ce-modified V2O5–WO3/TiO2 Catalyst

Preparation of VOC low-temperature oxidation catalysts with copper and iron binary metal oxides via hydrotalcite-like precursors

Speeding up low-temperature SCR with reactants-coupling dual catalytic sites

Catalytic Combustion of Chlorinated Aromatics over WOx/CeO2 Catalysts at Low Temperature

Highly Efficient Mesoporous V2O5/WO3–TiO2 Catalyst for Selective Catalytic Reduction of NOx: Effect of the Valence of V on the Catalytic Performance

A Novel Nb-Ce/Wox-Tio2 Catalyst with High Nh3-Scr Activity and Stability

Performance of Ce-modified V-W-Ti type catalyst on simultaneous control of NO and typical VOCS

V<sub>2</sub>O<sub>5</sub>-WO<sub>3</sub>/TiO<sub>2</sub> Catalysts for Low Temperature NH<sub>3</sub> SCR: Catalytic Activity and Characterization

Activity and Hydrothermal Stability of CeO_2–ZrO_2–WO_3 for the Selective Catalytic Reduction of NO_x with NH_3

New Insight into the Design of Highly Dispersed Pt Supported CeO2-TiO2 Catalysts with Superior Activity for VOCs Low-Temperature Removal

Low Temperature Degradation of Polychlorinated Dibenzo-P-dioxins and Dibenzofurans over a VOx-CeOx/TiO2 Catalyst with Addition of Ozone.