Abstract:Chemical sequestration is one important manner of CCUS. The injection of CO2 into an oil reservoir can not only sequestrate CO2 but also raise the oil recovery factor. The performance of chemical sequestration of CO2 depends on the interaction between CO2 solution and reservoir rock. In this paper, we have conducted three different scales of experiments, e.g., microscopic scale, core scale, and time scale, to fully investigate the interaction and resultant variation to mineral content, microscopic structure, porosity, and permeability under reservoir conditions (i.e., reservoir temperature of 90 °C) in Jimusar shale oil formation. The microscopic-scale experiment applied SEM and hyperspectral scanning to obtain microscopic pore throat structure and element distribution before and after soaking the rock in CO2 solution. The core-scale experiment employed XRD to evaluate mineral content variation caused by CO2 solution. Core flooding experiments were conducted to evaluate porosity and permeability variation caused by the dissolution of CO2 solution into the core samples. The third type of experiment was employed to investigate the effect of time sequence on the dissolution, in which the time ranged from 1 day to 14 days continuously. The experimental results indicate that, under Jimsar reservoir conditions, CO2 solution exhibits a relatively robust dissolution capability, causing significant alterations to the properties of the core samples. Specifically, the CO2 solution effectively dissolves carbonate upon contact. Calcite is the primary target for dissolution, followed by dolomite. In the presence of sufficient CO2, complete dissolution of all carbonates is achievable. On a microscopic scale, dissolution primarily occurs in the calcium-rich areas, leaving other regions unaffected. The typical pore size resulting from CO2 solution-induced dissolution ranges from several to dozens of micrometers. This dissolution process significantly enhances both porosity and permeability. For Jimsar shale core samples, porosity experienced an increase of over 20%, and permeability nearly doubled. Under Jimsar reservoir conditions at 90 °C, CO2 solution can consume all carbonates present in core samples within 8 days. The increase in porosity and permeability is rapid during the initial days and stabilizes around the 6th day. These research findings establish a theoretical foundation for CO2 chemical sequestration.

Experimental Study on Replacement Behavior of Crude Oil by CO 2 Based on Nuclear Magnetic Resonance Technology

Recovery of Adsorbed and Free Oil in Shale Formations by CO2 Injection: an Experimental Study Using 1D- and 2D-NMR

Experimental study on the oil recovery characteristics of CO2 energetic fracturing in ultralow-permeability sandstone reservoirs utilizing nuclear magnetic resonance

On the Replacement Behavior of CO2 in Nanopores of Shale Oil Reservoirs: Insights from Wettability Tests and Molecular Dynamics Simulations

An Experimental Investigation of Interaction between CO2 Solution and Rock under Reservoir Conditions in the Jimsar Shale Oil Formation

Mechanism of CO2 enhanced oil recovery in shale reservoirs

Exploring pore-scale production characteristics of oil shale after CO2 huff 'n' puff in fractured shale with varied permeability

Molecular Insight into CO2 Improving Oil Mobility in Shale Inorganic Nanopores Containing Water Films

CO2-Enhanced Radial Borehole Development of Shale Oil: Production Simulation and Parameter Analysis

Stimulation and Sequestration Mechanism of CO 2 Waterless Fracturing for Continental Tight Oil Reservoirs

Molecular Insights into CO2 Diffusion Behavior in Crude Oil

A Microfluidic Experiment on CO2 Injection for Enhanced Oil Recovery in a Shale Oil Reservoir with High Temperature and Pressure

Displacement Mechanism of Oil in Shale Inorganic Nanopores by Supercritical Carbon Dioxide from Molecular Dynamics Simulations

Dynamics of Oil-Co2-water - CO 2-Water Three-Phase under the Nanopore Confinement Effect: Implications for CO2 2 Enhanced Shale Oil Recovery and Carbon Storage

Experimental and numerical study on influencing factors of replacement capacity and slickwater flowback efficiency using pre-CO2 fracturing in tight oil reservoirs

Further Investigation of CO2 Quasi-Dry Fracturing in Shale Reservoirs—An Experimental Study

Experimental Study on the Impact of Supercritical CO2 Soak Pre-Treatment on Re-Fracturing of Shale Oil Reservoirs

Investigation of the Driving Force of Replacing Adsorbed Hydrocarbons by CO2 in Organic Matter from an Energy Perspective

EXPERIMENTAL STUDY ON CO2 REPLACEMENT METHOD USED IN SHALE GAS EXPLORATION

Application of CO2-Soluble Polymer-Based Blowing Agent to Improve Supercritical CO2 Replacement in Low-Permeability Fractured Reservoirs

Experimental and Modeling Study of CO2 EOR and CO2 Storage in Heavy Oil Reservoirs