Abstract:Platform and wall vaporization for electrothermal vaporization (ETV)-inductively coupled plasma mass spectrometry (ICP-MS) determination of some refractory elements (Ti, V, Cr, Mo, La and Zr) and Pb were comparatively studied with the use of poly (tetrafluoroethylene) (PTFE) as fluorinating reagent. The factors affecting the vaporization behaviors of the target analytes in the platform and tube wall vaporization including vaporization temperature and time, pyrolytic temperature and time were studied in detail, and the flow rates of carrier gas/auxiliary carrier gas, were carefully optimized. Under the optimal conditions, the signal profiles, signal intensity, interferences of coexisting ions and analytical reproducibility for wall and platform vaporization ETV–ICP-MS were compared. It was found that both wall and platform vaporization could give very similar detection limits, but the platform vaporization provided higher signal intensity and better precision for some refractory elements and Pb than the wall vaporization. Especially for La, the signal intensity obtained by platform vaporization was 3 times higher than that obtained by wall vaporization. For platform vaporization ETV–ICP-MS, the limits of detection (LODs) of 0.001μgL−1 (La) ~0.09μgL−1 (Ti) with the relative standard deviations (RSDs) of 1.5% (Pb) ~15.5% (Zr) were obtained. While for wall vaporization ETV–ICP-MS, LODs of 0.005μgL−1 (La) ~0.4μgL−1 (Pb) with RSDs of 3.2% (Mo) ~12.8% (Zr) were obtained. Both platform and tube wall vaporization techniques have been used for slurry sampling fluorination assisted ETV–ICP-MS direct determination of Ti, V, Cr, Mo, La, Zr and Pb in certified reference materials of NIES No. 8 vehicle exhaust particulates and GBW07401 soil, and the analytical results obtained are in good agreement with the certified values.

Direct Determination of Rare Earth Impurities in Lanthanum Oxide by Fluorination Assisted Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry with Slurry Sampling

Determination of Rare Earth Impurities in High-purity Lanthanum Oxide Using Electrothermal Vaporization/ICP-AES after HPLC Separation

Micro-sampling, high sensitivity ETV-ICP-MS method for the determination of trace rare earth impurities in high purity lanthanum oxide

Fluorination Assisted Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry: An Effective Method for Direct Determination of Refractory Elements in Solid Biological Samples

Direct determination of trace silicon in lanthanum oxide by using a selective volatility and slurry sampling-FETV-ICP-AES

Determination of trace rare earth elements in coal fly ash and atmospheric particulates by electrothermal vaporization inductively coupled plasma mass spectrometry with slurry sampling

Direct Determination of Rare Earth Impurities in High Purity Europium Oxide by Icp-Ms

Determination of trace rare earth impurities in high-purity cerium oxide by using electrothermal vaporization ICP-AES after HPLC separation with 2?ethylhexylhydrogen 2?ethylhexylphosphonate resin as the stationary phase

Determination of Non-Rare Earth Impurities in High Purity Lanthanum Oxide by Inductively Coupled Plasma Atomic Emission Spectrometry after HPLC Separation Using P507 Resin

Determination of Rare Earth Elements in Geological Samples by Inductively Coupled Plasma Atomic Emission Spectrometry with Flow Injection Liquid-Liquid Extraction

Determination of Rare Earth Impurities in High Purity Zirconium Dioxide by Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry Using 1-Phenyl-3-methyl-4-benzoyl-5-pyrazone As Extractant and Chemical Modifier

Determination of light rare earth elements by inductively coupled plasma atomic emission spectrometry

Determination of some refractory elements and Pb by fluorination assisted electrothermal vaporization inductively coupled plasma mass spectrometry with platform and wall vaporization

Flow injection on-line preconcentration with an ion-exchange resin coupled with microwave plasma torch-atomic emission spectrometry for the determination of trace rare earth elements

Determination of trace rare earth elements by inductively coupled plasma optical emission spectrometry after preconcentration with immobilized nanometer titanium dioxide

Determination of Trace Metal Impurities in Cerium Oxide by Fluorination-Assisted Etv-Icp-Aes after Hplc Separation

Chelation-assisted electrothermal vaporization for the ICP-MS determination of trace rare earth impurities in high purity Pr6O11 and Er2O3

Electrothermal Vaporization/ICP-AES and Its Application in the Analysis of Rare Earth Elements

Determination of Trace Amounts of Rare Earth Elements by ETV-ICP-AES Combined with Microcolumn Separation/Preconcentration

Direct ICP-AES Determination of Trace Impurities in Silicon Dioxide Using Fluorinating Electrothermal Vaporization with Slurry Sampling

Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry for the Determination of Trace Amount of Lanthanides and Yttrium in Soil with Polytetrafluroethylene Emulsion As a Chemical Modifier