Abstract:A novel five-axis real-time interpolation algorithm for 3[PP]S-XY hybrid mechanism is proposed in this paper. In the algorithm, the five-axis tool path for controlling this hybrid mechanism is separated into two sub-paths. One sub-path describes the movement of 3[PP]S parallel kinematic mechanism module, and the other one describes the movement of XY platform. A pair of cubic Bezier curves is employed to smooth the corners in those two sub-paths. Based on the homogenous Jacobian matrix of 3[PP]S mechanism, a relationship between the position errors of every driving joint in hybrid mechanism and the position deviation of the tool tip center point at the moving platform is established. This relationship is used to estimate the approximation error for the corners smoothing according to the accuracy requirement of tool tip center in interpolation. Due to the high computational efficiency of this corner smoothing method, it is integrated into the look-ahead module of computer numerical control (CNC) system to perform online tool path smoothing. By performing the speed planning based on a floating window scheme, a jerk limited S-shape speed profile can be generated efficiently. On this basis, a realtime look-ahead scheme, which is comprised of path-smoothing and feedrate scheduling, is developed to acquire a speed profile with smooth acceleration. A monotonic cubic spline is employed for synchronization between those two smoothed sub-paths in tool path interpolation. This interpolation algorithm has been integrated into our own developed CNC system to control a 3PRS-XY experimental instrument (P, R and S standing for prismatic, revolute and spherical, respectively). A club shaped trajectory is adopted to verify the smoothness and efficiency of the five-axis interpolator for hybrid mechanism control.

A Dual NURBS Curve Five-Axis Interpolator with Interval Division under Axial Kinematic Constraints

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Bilateral Optimization Feedrate on Splitting NURBS Curve with its Curvature Monotonicity

The Research of Dual NURBS Curves Interpolation Algorithm for High-Speed Five-Axis Machining

Smooth Non-Uniform Rational B-spline (NURBS) Machining with Kinematic Limit for Short Linear Segments

Axial self-adaptability based curve interpolation algorithm

An Interpolator for a Non-Uniform Rational B-Spline Curve with a High Efficiency and Accuracy Using Polynomial Representations

Non-isometric dual-spline interpolation for five-axis machine tools by FIR filtering-based feedrate scheduling using pseudo curvature under axial drive constraint

A new adaptive interpolation scheme of NURBS based on axis dynamics

Dual NURBS Curve Interpolation Algorithm for 5-Axis Machining

A Real-Time Look-Ahead Interpolation Methodology with Curvature-Continuous B-Spline Transition Scheme for Cnc Machining of Short Line Segments

AXIS-BASED LOOK-AHEAD INTERPOLATOR FOR MACHINING OF SURFACES REPRESENTED BY NURBS CURVES

Realization of a 5-Axis NURBS Interpolation with Controlled Angular Velocity

Trajectory and Velocity Planning Algorithm Based on NUBRS curve

Five-axis Interpolation of Continuous Short Linear Trajectories for 3[PP]S- XY Hybrid Mechanism by Dual Bezier Blending

Real-Time B-Spline Interpolator with Look-Ahead Scheme for High-Speed CNC Machine Tools

A Look-Ahead and Adaptive Speed Control Algorithm for Parametric Interpolation

A fully real-time spline interpolation algorithm with axial jerk constraint based on FIR filtering

A Real-time NURBS Surface Interpolator for 5-Axis Surface Machining

5-Axis A-Spline Iterpolation Function and Its Realization Strategy

Real-Time NURBS Interpolator with an Optimal Feed for High-Speed Machining