Abstract:A novel interpolation algorithm for parametric curves is proposed. The algorithm improves the machining efficiency and precision greatly with full consideration of the geometrical characteristic of the machining curves and the kinematical characteristic of the machine tools. Firstly, a look-ahead process, including a pre-interpolation and a speed adjustment, is sought to achieve an optimal machining speed profile for the whole parametric curve. The pre-interpolation stage with a constant feedrate is performed on the parametric curve. Critical zones are selected according to the chord errors and the changing values of the speed. The criterion for selection is that the chord error or the changing value of the speed exceeds the given threshold values. Then, a speed adjustment is applied to the sampling points of the critical zones. Meanwhile, the speed profile between two adjacent critical zones is developed with an acceleration/deceleration strategy to satisfy the dynamical requirements. After that, some relevant information about critical zones is stored into a dynamic memory buffer for the following fine interpolation process. Secondly, the fine interpolation is adaptively fulfilled with the data stored in the dynamic memory buffer based on the lengths of adjacent critical zones. Finally, a non-uniform rational basis spline curve is selected for simulation and experiment to demonstrate the feasibility of the proposing algorithm. The experimental results show that the algorithm can achieve not only smooth and high-speed transitions but also high accuracy with the minimization of chord errors in critical zones.

S-Model Speed Planning of NURBS Curve Based on Uniaxial Performance Limitation

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

Autonomous Trajectory Planning Based on Bézier Curve with Curvature Constraints and Piecewise-Jerk Speed-Time Optimization

LOOK-AHEAD ALGORITHM FOR VELOCITY CONTROL BASED ON PARAMETERIZED CURVE INTERPOLATOR

Bilateral Optimization Feedrate on Splitting NURBS Curve with its Curvature Monotonicity

Research on a New S-curve Acceleration and Deceleration Control Method

High speed feed control algorithm with piecewise linear continuous jounce

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Smooth Non-Uniform Rational B-spline (NURBS) Machining with Kinematic Limit for Short Linear Segments

Research on Cubic Polynomial Acceleration and Deceleration Control Model for High Speed NC Machining

Study on Algorithm to Generating Quintic Spline Curve

A Dual NURBS Curve Five-Axis Interpolator with Interval Division under Axial Kinematic Constraints

A practice on parametric curve interpolator based on NURBS

Research on Adaptive Feedrate Planning of NURBS Curves for CNC System

High-speed Real-Time Interpolation of Cubic Uniform B-spline Curve

A Look-Ahead and Adaptive Speed Control Algorithm for Parametric Interpolation

Velocity planning in multi-axis EDM based on a coder-player architecture

NURBS curve interpolation algorithm with high accuracy and minimal feedrate fluctuation

Axial self-adaptability based curve interpolation algorithm

An interpolation method based on adaptive smooth feedrate scheduling and parameter increment compensation for NURBS curve

A new adaptive interpolation scheme of NURBS based on axis dynamics