Abstract:The toolpaths for curved surfaces generated by most existing computer-aided-manufacturing applications are always consisted by short line segments. Due to the first-order discontinuity of the short line segment toolpath, the precise following of them must result in frequent acceleration/decelerations, which is easy to excite structural vibration of the machine tools, thus degrading the machining quality. To solve this problem, local corner rounding approaches are widely researched, however, most areas on the toolpath after corner rounding remains linear segments, unlike the global smoothing method who replaces all short line segments to spline curves thus obtaining smoother feed motion. Compared with the local corner rounding method, the global smoothing always requires iterative computes to satisfy the accuracy requirement, which makes it so time consuming that can hardly be utilized in CNC systems. To deal with above problem, this paper proposes a highly stable global smoothing method which does not need iterative computations. This is realized by a control-point-assigning-based global geometric smoothing algorithm and a FIR (Finite Impulse Response) filtering-based global motion smoothing algorithm. During global geometric smoothing, the short line segment toolpath is replaced by piecewise B-spline curve segments whose control points are directly assigned under the error tolerance constraint. During the global motion smoothing, a fast spline interpolation method based on FIR filtering is provided to generate smooth axial position references of the piecewise B-spline curve segments under the axial drive constraint. The whole global smoothing approach does not require pre-processing or iterative computation, which makes it easy to be applied. Extensive illustrations including numerical tests and experimental verification/comparison tests demonstrate the favorable effects of the proposed method in real-time capability and motion smoothing performance. Comparing with typical local corner rounding approach, the proposed global smoothing approach results in shorter motion time and better smoothness. Comparing with typical existing global smoothing method, the proposed method performs better in no required pre-processing and high-order motion smoothness.

Smooth Non-Uniform Rational B-spline (NURBS) Machining with Kinematic Limit for Short Linear Segments

MOTION VELOCITY SMOOTH LINK IN HIGH SPEED MACHINING

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

A smoothing method of continuous line-segment path in CNC machining based on real-time transformation of interpolation points

Bilateral Optimization Feedrate on Splitting NURBS Curve with its Curvature Monotonicity

NURBS curve fairing based on non-uniform B-spline wavelet decomposition

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

A smooth tool path generation and real-time interpolation algorithm based on B-spline curves

AXIS-BASED LOOK-AHEAD INTERPOLATOR FOR MACHINING OF SURFACES REPRESENTED BY NURBS CURVES

A Dual NURBS Curve Five-Axis Interpolator with Interval Division under Axial Kinematic Constraints

Axial self-adaptability based curve interpolation algorithm

Improved time-optimal B-spline feedrate scheduling for NURBS tool paths in CNC machining

Research on Adaptive Feedrate Planning of NURBS Curves for CNC System

A new adaptive interpolation scheme of NURBS based on axis dynamics

A novel time-optimal linear toolpath smoothing method based on airthoid and circular splines for CNC machining

An Interpolator for a Non-Uniform Rational B-Spline Curve with a High Efficiency and Accuracy Using Polynomial Representations

A New Linear Interpolation Method with Lookahead for High Speed Machining

Global smoothing of short line segment toolpaths by control-point-assigning-based geometric smoothing and FIR filtering-based motion smoothing

S-Model Speed Planning of NURBS Curve Based on Uniaxial Performance Limitation

Nurbs Interpolator Based on Dynamic Property of the Machine Tool