Abstract:Increasing the conductivity of gas diffusion layers (GDLs) is an important way to improve the output performance of polymer electrolyte membrane fuel cells (PEMFCs). However, the complex porous fiber structures of GDLs significantly enhances the difficulty of quantitatively altering their conductivity which is determined by the carbon fibers and the conduction characteristics between fibers. In addition, the microstructures of various types of GDLs are different. Thus, it is a considerable challenge to explore the conductive mechanisms of these porous materials and optimize their structures to reduce their bulk resistances. In this work, a mathematical graph theory model that applies to the through-plane (T-P) bulk resistance prediction of two types of commonly used GDLs, carbon paper and carbon felt, is established to explain their different micro conduction mechanisms in depth. In addition to the number of fiber contact points, their distribution, as well as the resistance of the carbon fibers, are all important factors affecting the T-P conductivity. Optimizing fiber density and fiber diameter can significantly improve the T-P conductivity of carbon paper. In comparison, making the structure of carbon felt more compact so that the distribution of its contact points in the T-P direction can be more uniform will be more effective for the reduction of its T-P bulk resistance. Meanwhile, the T-P bulk resistance of carbon paper can also be effectively improved by optimizing the content and distribution of the binders. A method to decline the bulk resistance of carbon paper by aggregating the binders in the in-plane (IP) direction is proposed. The simulation results show that it can reduce the T-P bulk resistance of carbon paper by about 19.9% at a compressive stress of 1.5 MPa. This study provides further guidance for optimizing the structural designs of GDLs to optimize their conduction performance.

The Effective Thermal Conductivity of Carbon Fiber Paper Based on Fractal Theory and Internal Contact State Function

Bulk Resistance and Internal Contacts of Carbon Fiber Paper Determined Via X-ray Computed Tomography

Fractal Model for the Effective Thermal Conductivity of Microporous Layer

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Graph Theory Model and Mechanism Analysis of Carbon Fiber Paper Conductivity in Fuel Cell Based on Physical Structure

Study on modification of carbon fiber and performance of carbon paper as gas diffusion layer

Mechanism and Model for Optimizing Polytetrafluoroethylene Distribution to Improve the Electrical and Thermal Conductivity of Treated Carbon Fiber Paper in Fuel Cells.

Prediction The Differences Of Permeability Between Carbon Fiber Paper And Carbon Fiber Cloth In Pem Fuel Cells

Numerical Analysis of Static and Dynamic Heat Transfer Behaviors Inside Proton Exchange Membrane Fuel Cell

Study on the Effect of Carbon Fiber Surface Characteristics on the Performance of Carbon Paper Used in Fuel Cell

Analysis of transverse thermal conductivity for mesophase pitch-based carbon fibers and the through-thickness heat conduction of their composites

Effect of PTFE and Liquid Water on the Thermal Characteristics of Compressed Gas Diffusion Backing of PEM Fuel Cell

The Quantitative Analysis for the Formation of Carbon Fiber Paper and Its Influencing Factors

Investigation of Water and Heat Transfer Mechanism in PEMFCs Based on a Two-Phase Non-Isothermal Model

Effect of Graphitization Degree of Fuel Cell Gas Diffusion Layers on Their Heat Management:Modeling and Experiments

A Model for Effective Thermal Conductivity of Porous Carbon Materials in FCM Fuel Pellets

A Novel Multiscale Semi-Analytical Approach for Thermal Properties of Fuzzy Fiber Reinforced Composites

A Logarithmic-Type Constitutive Model for Carbon Fiber Papers Considering Hertz Contact Effect

Conduction mechanism analysis and modeling of different gas diffusion layers for PEMFC to improve their bulk conductivities via microstructure design

Prediction of the Solid Effective Thermal Conductivity of Fatty Acid/carbon Material Composite Phase Change Materials Based on Fractal Theory

Research On The Pulp Of Carbon Fiber Paper For Fuel Cell