Abstract:Flat-field concave diffraction grating is the key device of a portable grating spectrometer with the advantage of integrating dispersion, focusing and flat-field in a single device. It directly determines the quality of a spectrometer. The most important two performances determining the quality of the spectrometer are spectral image quality and diffraction efficiency. The diffraction efficiency of a grating depends mainly on its groove shape. But it has long been a problem to get a uniform predetermined groove shape across the whole concave grating area, because the incident angle of the ion beam is restricted by the curvature of the concave substrate, and this severely limits the diffraction efficiency and restricts the application of concave gratings. the authors present a two-step method for designing convex gratings, which are made holographically with two exposure point sources placed behind a plano-convex transparent glass substrate, to solve this problem. The convex gratings are intended to be used as the Master gratings for making aberration-corrected flat-field concave gratings. To achieve high spectral image quality for the replicated concave gratings, the refraction effect at the planar back surface and the extra optical path lengths through the substrate thickness experienced by the two divergent recording beams are considered during optimization. This two-step method combines the optical-path-length function method and the ZEMAX software to complete the optimization with a high success rate and high efficiency. In the first step, the optical-path-length function method is used without considering the refraction effect to get an approximate optimization result. In the second step, the approximate result of the first step is used as the initial value for ZEMAX to complete the optimization including the refraction effect. An example of design problem was considered. The simulation results of ZEMAX proved that the spectral image quality of a replicated concave grating is comparable with that of a directly recorded concave grating.

Surface-relief Gratings with Sharp Edges: Improvement of the Convergence of the Coordinate Transformation Method

Improvement Of The Coordinate Transformation Method For Surface-Relief Gratings With Sharp Edges

Design of Large-Deflection-angle High-Diffraction-efficiency High-Dispersion Hybrid Gratings

Coordinate Transformation Method: Theoretical Analysis And Numerical Improvement Of Convergence

Rigorous and Efficient Grating-Analysis Method Made Easy for Optical Engineers.

Simple Reformulation of the Coordinate Transformation Method for Gratings with a Vertical Facet or Overhanging Profile.

Simple parameterized coordinate transformation method for deep- and smooth-profile gratings.

On the Convergence of the Coupled-Wave Approach for Lamellar Diffraction Gratings

Multilayer-coated Diffraction Gratings: Differential Method of Chandezon Et Al Revisited

Some topics in extending the C method to multilayer gratings of different profiles

Using symmetries of grating groove profiles to reduce computation cost of the C method.

Enlarging applicability domain of the C method with piecewise linear parameterization: gratings of deep and smooth profiles

Oblique-Coordinate-System-Based Chandezon Method for Modeling One-Dimensionally Periodic, Multilayer, Inhomogeneous, Anisotropic Gratings

Numerical Stability of the C Method and a Perturbative Preconditioning Technique to Improve Convergence.

Convergence Of The Coupled-Wave Method For Metallic Lamellar Diffraction Gratings

Conical diffractions of multilayered gratings modeled by Cartesian rigorous coupled-wave analysis

Design Method of Convex Master Gratings for Replicating Flat-Field Concave Gratings

Analysis and Design of a Concave Diffraction Grating with Total-Internal-reflection Facets by a Hybrid Diffraction Method.

Topology optimization of blazed gratings under conical incidence

Fourier Method for Modeling Slanted Lamellar Gratings of Arbitrary End-Surface Shapes in Conical Mounting.

Reformulation of the Fourier Modal Method for Surface-Relief Gratings Made with Anisotropic Materials